General Description
The MAX3280E/MAX3281E/MAX3283E/MAX3284E are
single receivers designed for RS-485 and RS-422 com-
munication. These devices guarantee data rates up to
52Mbps, even with a 3V power supply. Excellent propa-
gation delay (15ns max) and package-to-package
skew time (8ns max) make these devices ideal for mul-
tidrop clock distribution applications.
The MAX3280E/MAX3281E/MAX3283E/MAX3284E
have true fail-safe circuitry, which guarantees a logic-
high receiver output when the receiver inputs are
opened or shorted. The receiver output will be a logic
high if all transmitters on a terminated bus are disabled
(high impedance). These devices feature 1/4-unit-load
receiver input impedance, allowing up to 128 receivers
on the same bus.
The MAX3280E is a single receiver available in a 5-pin
SOT23 package. The MAX3281E/MAX3283E single
receivers have a receiver enable (EN or EN) function
and are offered in a 6-pin SOT23 package. The
MAX3284E features a voltage logic pin that allows com-
patibility with low-voltage logic levels, as in digital
FPGAs/ASICs. On the MAX3284E, the voltage threshold
for a logic high is user-defined by setting VLin the
range from 1.65V to VCC. The MAX3284E is also
offered in a 6-pin SOT23 package.
Applications
Clock Distribution
Telecom Racks
Base Stations
Industrial Control
Local Area Networks
Features
♦ESD Protection:
±15kV–Human Body Model
±6kV–IEC 1000-4-2, Contact Discharge
±12kV–IEC 1000-4-2, Air-Gap Discharge
♦Guaranteed 52Mbps Data Rate
♦Guaranteed 15ns Receiver Propagation Delay
♦Guaranteed 2ns Receiver Skew
♦Guaranteed 8ns Package-to-Package Skew Time
♦VLPin for Connection to FPGAs/ASICs
♦Allow Up to 128 Transceivers on the Bus
(1/4-unit-load)
♦Tiny SOT23 Package
♦True Fail-Safe Receiver
♦-7V to +12V Common-Mode Range
♦3V to 5.5V Power-Supply Range
♦Enable (High and Low) Pins for Redundant
Operation
♦Three-State Output Stage (MAX3281E/MAX3283E)
♦Thermal Protection Against Output Short Circuit
MAX3280E/MAX3281E/MAX3283E/MAX3284E
±15kV ESD-Protected 52Mbps, 3V to 5.5V, SOT23
RS-485/RS-422 True Fail-Safe Receivers
________________________________________________________________ Maxim Integrated Products 1
Ordering Information
19-2320; Rev 0; 1/02
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Pin Configurations appear at end of data sheet.
PART TEMP RANGE PIN-
PACKAGE
TOP
MARK
MAX3280EAUK-T -40°C to +125°C 5 SOT23-5 ADVM
MAX3281EAUT-T -40°C to +125°C 6 SOT23-6 ABAT
MAX3283EAUT-T -40°C to +125°C 6 SOT23-6 ABAU
MAX3284EAUT-T -40°C to +125°C 6 SOT23-6 ABAV
Selector Guide
PART VLENABLE DATA RATE PACKAGE
MAX3280E ——52Mbps 5-Pin SOT23
MAX3281E —Active High 52Mbps 6-Pin SOT23
MAX3283E —Active Low 52Mbps 6-Pin SOT23
MAX3284E ✔—52Mbps (Note 1) 6-Pin SOT23
Note 1: MAX3284E data rate is dependent on VL.
MAX3280E/MAX3281E/MAX3283E/MAX3284E
±15kV ESD-Protected 52Mbps, 3V to 5.5V, SOT23
RS-485/RS-422 True Fail-Safe Receivers
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(VCC = 3V to 5.5V, VL= VCC, TA= TMIN to TMAX, unless otherwise noted. Typical values are at VCC = 5V and TA= +25°C.) (Notes 2, 3)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
(All Voltages Referenced to GND)
Supply Voltage (VCC) ...............................................-0.3V to +6V
Control Input Voltage (EN, EN).................................-0.3V to +6V
VLInput Voltage .......................................................-0.3V to +6V
Receiver Input Voltage (A, B)..............................-7.5V to +12.5V
Receiver Output Voltage (RO)....................-0.3V to (VCC + 0.3V)
Receiver Output Voltage
(RO) (MAX3284E) .....................................-0.3V to (VL+ 0.3V)
Receiver Output Short-Circuit Current .......................Continuous
Continuous Power Dissipation (TA= +70°C)
5-Pin SOT23 (derate 7.1mW/°C above +70°C)............571mW
6-Pin SOT23 (derate 8.7mW/°C above +70°C)............696mW
Operating Temperature Range
MAX328_EA__ ..............................................-40°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature......................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Supply Voltage VCC 3.0 5.5 V
Supply Current ICC No load 9 15 mA
VL Input Range VLMAX3284E 1.65 VCC V
VL Supply Current ILNo load (MAX3284E) 10 µA
RECEIVER
VIN = +12V 250
Input Current (A and B) IA, B VCC = GND or 5.5V VIN = -7V -200 µA
Receiver Differential Threshold
Voltage VTH -7V ≤ VCM ≤ +12V
(Note 4) -200 -125 -50 mV
Receiver Input Hysteresis ∆VTH VA + VB = 0 25 mV
Receiver Enable Input Low VENIL MAX3281E, MAX3283E only 0.4 V
Receiver Enable Input High VENIH MAX3281E, MAX3283E only 2 V
Receiver Enable Input Leakage ILEAK MAX3281E, MAX3283E only ±10 µA
MAX3280E/MAX3281E/MAX3283E,
IOH = -4mA, RO high VCC - 0.4
Receiver Output High Voltage VOH MAX3284E, IOH = -1mA, 1.65V ≤ VL ≤ VCC,
RO high VL - 0.4
V
MAX3280E/MAX3281E/MAX3283E,
IOL = 4mA, RO low 0.4
Receiver Output Low Voltage VOL MAX3284E, IOL = 1mA, 1.65V ≤ VL ≤ VCC,
RO low 0.4
V
Three-State Output Current at
Receiver IOZR 0 ≤ VO ≤ VCC, RO = high impedance ±5 µA
Receiver Input Resistance RIN -7V ≤ VCM ≤ +12V (Note 5) 48 kΩ
Receiver Output Short-Circuit
Current IOSR 0 ≤ VRO ≤ VCC ±130 mA
ESD PROTECTION
Human Body Model ±15
IEC1000-4-2 (Air-Gap Discharge) ±12ESD Protection (A, B)
IEC1000-4-2 (Contact Discharge) ±6
kV
MAX3280E/MAX3281E/MAX3283E/MAX3284E
±15kV ESD-Protected 52Mbps, 3V to 5.5V, SOT23
RS-485/RS-422 True Fail-Safe Receivers
_______________________________________________________________________________________ 3
SWITCHING CHARACTERISTICS
(VCC = 3V to 5.5V, VL= VCC, TA= TMIN to TMAX, unless otherwise noted. Typical values are at VCC = 5V and TA= +25°C.) (Notes 2, 3)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Maximum Data Rate fMAX CL = 15pF (Notes 5, 6) 52 Mbps
tPLH Figure 1, CL = 15pF, VID = 2V, VCM = 0 7 15
Receiver Propagation Delay tPHL Figure 1, CL = 15pF, VID = 2V, VCM = 0 8 15 ns
Receiver Output |tPLH - tPHL|t
PSKEW Figure 1, CL = 15pF, TA = +25°C2ns
Device-to-Device Propagation
Delay Matching
Same power supply, maximum temperature
difference between devices = +30°C.
(Note 5)
8ns
ENABLE/DISABLE TIME FOR MAX3281E/MAX3283E
Receiver Enable to Output Low tPRZL Figure 2, CL = 15pF 500 ns
Receiver Enable to Output High tPRZH Figure 2, CL = 15pF 500 ns
Receiver Disable Time from Low tPRLZ Figure 2, CL = 15pF 500 ns
Receiver Disable Time from High tPRHZ Figure 2, CL = 15pF 500 ns
Typical Operating Characteristics
(VCC = 3.3V, TA = +25°C, unless otherwise noted.)
0
1
3
2
4
5
02010 30 40 50 60
RECEIVER OUTPUT LOW VOLTAGE
vs. OUTPUT CURRENT
MAX3280/1/3/4E toc01
OUTPUT CURRENT (mA)
OUTPUT VOLTAGE (V)
VCC = 3.3V
VCC = 5V
0
1
3
2
4
5
-50 -30-40 -20 -10 0
RECEIVER OUTPUT HIGH VOLTAGE
vs. OUTPUT CURRENT
MAX3280/1/3/4E toc02
OUTPUT CURRENT (mA)
OUTPUT VOLTAGE (V)
VCC = 3.3V
VCC = 5V
2.5
3.0
4.0
3.5
4.5
5.0
-50 0-25 25 50 75 100 125
RECEIVER OUTPUT HIGH VOLTAGE
vs. TEMPERATURE
MAX3280/1/3/4E toc03
TEMPERATURE (°C)
RECEIVER OUTPUT HIGH VOLTAGE (V)
VCC = 5V
VCC = 3.3V
A = 1V, B = GND, IOH = -4mA
Note 2: Parameters are 100% production tested at +25°C, limits over temperature are guaranteed by design.
Note 3: All currents into the device are positive; all currents out of the device are negative. All voltages are referenced to device
ground, unless otherwise noted.
Note 4: VCM is the common-mode input voltage. VID is the differential input voltage.
Note 5: Not production tested. Guaranteed by design.
Note 6: See Table 2 for MAX3284E data rates with VL< VCC.
MAX3280E/MAX3281E/MAX3283E/MAX3284E
±15kV ESD-Protected 52Mbps, 3V to 5.5V, SOT23
RS-485/RS-422 True Fail-Safe Receivers
4 _______________________________________________________________________________________
0
50
100
150
200
-50 0-25 25 50 75 100 125
RECEIVER OUTPUT LOW VOLTAGE
vs. TEMPERATURE
MAX3280/1/3/4E toc04
TEMPERATURE (°C)
RECEIVER OUTPUT LOW VOLTAGE (mV)
VCC = 5V
VCC = 3.3V
A = GND, B = 1V, IOL = 4mA
4
5
7
6
8
9
-50 0-25 25 50 75 100 125
RECEIVER PROPAGATION DELAY (tPLH)
vs. TEMPERATURE
MAX3280/1/3/4E toc05
TEMPERATURE (°C)
tPLH (ns)
VCC = 5V
VCC = 3.3V
6
7
8
9
10
-50 0-25 25 50 75 100 125
RECEIVER PROPAGATION DELAY (tPHL)
vs. TEMPERATURE
MAX3280/1/3/4E toc06
TEMPERATURE (°C)
tPHL (ns)
VCC = 5V
VCC = 3.3V
5
6
7
8
9
SUPPLY CURRENT vs. TEMPERATURE
MAX3280/1/3/4E toc07
TEMPERATURE (°C)
SUPPLY CURRENT (mA)
-50 25 50-25 0 75 100 125
VCC = 5V
VCC = 3.3V
60
50
40
30
20
1.5 3.52.5 4.5 5.5
MAX3284E MAXIMUM DATA RATE
vs. VOLTAGE LOGIC LEVEL
MAX3280/1/3/4E toc08
VOLTAGE LOGIC LEVEL (V)
DATA RATE (Mbps)
0
2
6
4
8
10
SUPPLY CURRENT vs. DATA RATE
MAX3280/1/3/4E toc09
DATA RATE (kbps)
SUPPLY CURRENT (mA)
10 1000100 10,000 100,000
ICC, VCC = VL = 5V
ICC, VCC = VL = 3.3V
IL, VCC = VL = 5V
IL, VCC = VL = 3.3V
0.001
0.01
0.1
1
10
VL SUPPLY CURRENT
vs. TEMPERATURE
MAX3280/1/3/4 toc10
TEMPERATURE (°C)
VL SUPPLY CURRENT (mA)
-50 25 50-25 0 75 100 125
VCC = VL = 5V
DATA RATE = 52Mbps VCC = VL = 3.3V
DATA RATE = 52Mbps
VCC = VL = 5V
DATA RATE = 100kbps
VCC = VL = 3.3V
DATA RATE = 100kbps
Typical Operating Characteristics (continued)
(VCC = 3.3V, TA = +25°C, unless otherwise noted.)
Detailed Description
The MAX3280E/MAX3281E/MAX3283E/MAX3284E are
single, true fail-safe receivers designed to operate at
data rates up to 52Mbps. The fail-safe architecture guar-
antees a high output signal if both input terminals are
open or shorted together. See the True Fail-Safe section.
This feature assures a stable and predictable output
logic state with any transmitter driving the line. These
receivers function with a 3.3V or 5V supply voltage and
feature excellent propagation delay times (15ns).
The MAX3280E is a single receiver available in a 5-pin
SOT23 package. The MAX3281E (EN, active high) and
MAX3283E (EN, active low) are single receivers that
also contain an enable pin. Both the MAX3281E and
MAX3283E are available in a 6-pin SOT23 package.
The MAX3284E is a single receiver that contains a VL
pin, which allows communication with low-level logic
included in digital FPGAs. The MAX3284E is available
in a 6-pin SOT23 package.
The MAX3284E’s low-level logic application allows
users to set the logic levels. A logic high level of 1.65V
will limit the maximum data rate to 20Mbps.
±15kV ESD Protection
ESD-protection structures are incorporated on the
receiver input pins to protect against ESD encountered
during handling and assembly. The MAX3280E/
MAX3281E/MAX3283E/MAX3284E receiver inputs (A,
B) have extra protection against static electricity found
in normal operation. Maxim’s engineers developed
state-of-the-art structures to protect these pins against
±15kV ESD without damage. After an ESD event, this
family of parts continues working without latchup.
ESD protection can be tested in several ways. The
receiver inputs are characterized for protection to the
following:
•±15kV using the Human Body Model
•±6kV using the Contact Discharge method specified
in IEC 1000-4-2 (formerly IEC 801-2)
•±12kV using the Air-Gap Discharge method speci-
fied in IEC 1000-4-2 (formerly IEC 801-2)
ESD Test Conditions
ESD performance depends on a number of conditions.
Contact Maxim for a reliability report that documents
test setup, methodology, and results.
Human Body Model
Figure 3a shows the Human Body Model, and Figure
3b shows the current waveform it generates when dis-
charged into a low impedance. This model consists of
a 100pF capacitor charged to the ESD voltage of inter-
est, which is then discharged into the device through a
1.5kΩresistor.
IEC 1000-4-2
Since January 1996, all equipment manufactured
and/or sold in the European community has been
required to meet the stringent IEC 1000-4-2 specifica-
tion. The IEC 1000-4-2 standard covers ESD testing
and performance of finished equipment; it does not
specifically refer to integrated circuits. The
MAX3280E/MAX3281E/MAX3283E/MAX3284E help
MAX3280E/MAX3281E/MAX3283E/MAX3284E
±15kV ESD-Protected 52Mbps, 3V to 5.5V, SOT23
RS-485/RS-422 True Fail-Safe Receivers
_______________________________________________________________________________________ 5
Pin Description
PIN
MAX3280E MAX3281E MAX3283E MAX3284E NAME FUNCTION
1111V
CC Positive Supply: 3V ≤ VCC ≤ 5.5V. Bypass with a 0.1µF
capacitor to GND.
2 2 2 2 GND Ground
3333RO
Receiver Output. RO will be high if (A–B) ≥ -50mV. RO will be
low if (A–B) ≤ -200mV.
4 4 4 4 B Inverting Receiver Input
—— 5—EN Receiver Output Enable. Drive EN low to enable RO. When EN
is high, RO is high impedance.
—5——EN Receiver Output Enable. Drive EN high to enable RO. When
EN is low, RO is high impedance.
——— 5V
L
Low-Voltage Logic-Level Supply Voltage. VL is a user-defined
voltage, ranging from 1.65V to VCC. RO output high is pulled up
to VL. Bypass with a 0.1µF capacitor to GND.
5 6 6 6 A Noninverting Receiver Input
MAX3280E/MAX3281E/MAX3283E/MAX3284E
users design equipment that meets Level 3 of IEC 1000-
4-2, without additional ESD-protection components.
The main difference between tests done using the
Human Body Model and IEC 1000-4-2 is higher peak
current in IEC 1000-4-2. Because series resistance is
lower in the IEC 1000-4-2 ESD test model (Figure 4a),
the ESD-withstand voltage measured to this standard is
generally lower than that measured using the Human
Body Model. Figure 4b shows the current waveform for
the ±8kV IEC 1000-4-2 Level 4 ESD Contact Discharge
test. The Air-Gap test involves approaching the device
with a charger probe. The Contact Discharge method
connects the probe to the device before the probe is
energized.
Machine Model
The Machine Model for ESD testing uses a 200pF stor-
age capacitor and zero-discharge resistance. It mimics
the stress caused by handling during manufacturing
and assembly. All pins (not just the RS-485 inputs)
require this protection during manufacturing. Therefore,
the Machine Model is less relevant to the I/O ports than
are the Human Body Model and IEC 1000-4-2.
True Fail-Safe
The MAX3280E/MAX3281E/MAX3283E/MAX3284E
guarantee a logic-high receiver output when the receiv-
er inputs are shorted or open, or when they are connect-
ed to a terminated transmission line with all drivers
disabled. This guaranteed logic high is achieved by set-
ting the receiver threshold between -50mV and -200mV.
If the differential receiver input voltage (A-B) is greater
than or equal to -50mV, RO is logic high. If (A-B) is less
than or equal to -200mV, RO is logic low.
In the case of a terminated bus with all transmitters dis-
abled, the receiver’s differential input voltage is pulled
to ground by the termination. This results in a logic high
with a 50mV minimum noise margin. Unlike previous
fail-safe devices, the -50mV to -200mV threshold com-
plies with the ±200mV EIA/TIA-485 standard.
Receiver Enable
(MAX3281E and MAX3283E only)
The MAX3281E and MAX3283E feature a receiver out-
put enable (EN, MAX3281E or EN, MAX3283E) input
that controls the receiver. The MAX3281E receiver
enable (EN) pin is active high, meaning the receiver
outputs are active when EN is high. The MAX3283E
receiver enable (EN) pin is active low. Receiver outputs
are high impedance when the MAX3281E’s EN pin is
low and when the MAX3283E’s EN pin is high.
Low-Voltage Logic Levels
(MAX3284E only)
An increasing number of applications now operate at
low-voltage logic levels. To enable compatibility with
these low-voltage logic level applications, such as digi-
tal FPGAs, the MAX3284E VL pin is a user-defined sup-
ply voltage that designates the voltage threshold for a
logic high.
At lower VLvoltages, the data rate will also be lower. A
logic-high level of 1.65V will receive data at 20Mbps.
Table 2 gives data rates at various voltages at VL.
Applications Information
Propagation Delay Matching
The MAX3280E/MAX3281E/MAX3283E/MAX3284E
(VCC = VL) exhibit propagation delays that are closely
matched from one device to another, even between
devices from different production lots. This feature
allows multiple data lines to receive data and clock sig-
nals with minimal skew with respect to each other.
Figure 5 shows the typical propagation delays. Small
receiver skew times, the difference between the low-to-
high and high-to-low propagation delay, help maintain a
symmetrical ratio (50% duty cycle). The receiver skew
time | tPLH - tPHL | is under 2ns for either a 3.3V supply
or a 5V supply.
Multidrop Clock Distribution
Low package-to-package skew (8ns max) makes the
MAX3280E/MAX3281E/MAX3283E/MAX3284E
(VCC = VL) ideal for multidrop clock distribution. When
distributing a clock signal to multiple circuits over long
transmission lines, receivers in separate locations, and
possibly at two different temperatures, would ideally
±15kV ESD-Protected 52Mbps, 3V to 5.5V, SOT23
RS-485/RS-422 True Fail-Safe Receivers
6 _______________________________________________________________________________________
PART ENABLE = HIGH ENABLE = LOW
MAX3281E Active High Z
MAX3283E High Z Active
Table 1. MAX3281E/MAX3283E Enable
Table
VCC = 3V TO 5.5V
VLMAXIMUM DATA RATE
1.65V 20Mbps
2.2V 33Mbps
≥3.3V 52Mbps
Table 2. MAX3284E Data Rate Table
provide the same clock to their respective circuits.
Thus, minimal package-to-package skew is critical. The
skew must be kept well below the period of the clock
signal to ensure that all of the circuits on the network
are synchronized.
128 Receivers on the Bus
The standard RS-485 input impedance is 12kΩ(one-
unit load). The standard RS-485 transmitter can drive
32 unit loads. The MAX3280E/MAX3281E/MAX3283E/
MAX3284E present a 1/4-unit-load input impedance
(48kΩ), which allows up to 128 receivers on the bus.
Any combination of these RS-485 receivers with a total
of 32 unit loads can be connected to the same bus.
Thermal Protection
The MAX3280E/MAX3281E/MAX3283E/MAX3284E fea-
ture thermal protection. Thermal protection sets the out-
put stage in high-impedance mode when a short circuit
occurs at the output, limiting both the power dissipation
and temperature. The thermal temperature threshold is
+165°C, with a hysteresis of 20°C.
MAX3280E/MAX3281E/MAX3283E/MAX3284E
±15kV ESD-Protected 52Mbps, 3V to 5.5V, SOT23
RS-485/RS-422 True Fail-Safe Receivers
_______________________________________________________________________________________ 7
Test Circuits/Timing Diagrams
VOH
VOL
A
B
1V
RO
-1V fIN = 1MHz
tr, tf ≤ 3ns
OUTPUT
INPUT
VCC/2 VCC/2
tPHL tPLH
Figure 1. Receiver Propagation Delay
tPRZH
OUT
EN
OUT
EN
VCC/2
VCC/2
VCC
0
VOH
0
VCC
0
VOH
0
FOR MAX3281E THE ENABLE SIGNAL IS INVERTED.
S1 OPEN
S2 CLOSED
S3 = 1.5V
S1 OPEN
S2 CLOSED
S3 = 1.5V
0.25V
tPRHZ
tPRLZ
VCC/2
0.25V
OUT
EN
OUT
EN
VCC
0
VCC
VOL
VCC
0
VCC
VOL
S1 CLOSED
S2 OPEN
S3 = -1.5V
S1 CLOSED
S2 OPEN
S3 = -1.5V
tPRZL
VCC/2
VCC/2
GENERATOR
1.5V
-1.5V VID R
CL
1kΩ
S1
VCC
S2
50Ω
S3
VCC/2
Figure 2. MAX3281E/MAX3283E Receiver Enable/Disable Timing
MAX3280E/MAX3281E/MAX3283E/MAX3284E
±15kV ESD-Protected 52Mbps, 3V to 5.5V, SOT23
RS-485/RS-422 True Fail-Safe Receivers
8 _______________________________________________________________________________________
Test Circuits/Timing Diagrams (continued)
CHARGE-CURRENT
LIMIT RESISTOR
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
Cs
100pF
RC
1MΩ
RD
1.5kΩ
HIGH-
VOLTAGE
DC
SOURCE
DEVICE
UNDER
TEST
Figure 3a. Human Body ESD Test Model
IP 100%
90%
36.8%
tRL TIME
tDL
CURRENT WAVEFORM
PEAK-TO-PEAK RINGING
(NOT DRAWN TO SCALE)
Ir
10%
0
0
AMPERES
Figure 3b. Human Body Model Current Waveform
CHARGE-CURRENT
LIMIT RESISTOR
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
Cs
150pF
RC
50Ω to 100Ω
RD
330Ω
HIGH-
VOLTAGE
DC
SOURCE
DEVICE
UNDER
TEST
Figure 4a. IEC 1000-4-2 ESD Test Model
tr = 0.7ns to 1ns
30ns
60ns
t
100%
90%
10%
IPEAK
I
Figure 4b. IEC 1000-4-2 ESD Generator Current Waveform
10ns
A, 1V/div
RO, 2.5V/div
B = GND
Figure 5. Receiver Propagation Delay Driven by External RS-
485 Device
MAX3280E/MAX3281E/MAX3283E/MAX3284E
±15kV ESD-Protected 52Mbps, 3V to 5.5V, SOT23
RS-485/RS-422 True Fail-Safe Receivers
_______________________________________________________________________________________ 9
DATA IN
TRANSMITTER
120ΩRO1
RO2
EN
EN
MAX3283E
MAX3281E
MAX3281E/MAX3283E IN REDUNDANT
RECEIVER APPLICATION
Typical Operating Circuit
GND
BRO
15AVCC
MAX3280E
SOT23-5
TOP VIEW
2
34
GND
BRO
16A
5
VCC
MAX3281E
MAX3283E
SOT23-6
2
34
EN (EN)
( ) ARE FOR MAX3283E
GND
BRO
16A
5
VCC
MAX3284E
SOT23-6
2
34
VL
Pin Configurations
Chip Information
TRANSISTOR COUNT: 233
PROCESS: BiCMOS
MAX3280E/MAX3281E/MAX3283E/MAX3284E
±15kV ESD-Protected 52Mbps, 3V to 5.5V, SOT23
RS-485/RS-422 True Fail-Safe Receivers
10 ______________________________________________________________________________________
Package Information
MAX3280E/MAX3281E/MAX3283E/MAX3284E
±15kV ESD-Protected 52Mbps, 3V to 5.5V, SOT23
RS-485/RS-422 True Fail-Safe Receivers
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 11
© 2002 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
Package Information (continued)
6LSOT.EPS
ENGLISH • •••• • ••• • •••
Login | Register
Enter keywords or part number
What's New Products Solutions Design AppNotes Support Sales About Us My Maxim
Maxim > Products > [Interface, Interconnect, and Signal Integrity]
MAX3280E, MAX3281E, MAX3283E, MAX3284E
±15kV ESD-Protected 52Mbps, 3V to 5.5V, SOT23 RS-485/RS-422 True Fail-Safe Receivers
Industry's First RS-485/RS-422 SOT Receivers
QuickView Technical Documents Ordering Info More Information User Comments (0) All
Status
Active: In Production.
Ordering Information
Notes:
1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one
business day.
3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on
DS parts = cut tape. More: SeeFull Data Sheet or Part Naming Conventions.
4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses.
Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix
character.
Devices: 1-11 of 11
MAX3280E Free
Sample Buy Status Package: TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX3280EAUK-T Active SOT;5 pin;9 mm²
Outline Drawing: 21-0057 (PDF)
Land Pattern: 90-0174 (PDF)
Use pkgcode/variation: U5-2*
-40°C to +125°C RoHS/Lead-Free: No
Materials Analysis
MAX3280EAUK+T Active SOT;5 pin;9 mm²
Outline Drawing: 21-0057 (PDF)
Land Pattern: 90-0174 (PDF)
Use pkgcode/variation: U5+2*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3281E Free
Sample Buy Status Package: TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX3281EAUT+ Active SOT;6 pin;9 mm²
Outline Drawing: 21-0058 (PDF)
Land Pattern: 90-0175 (PDF)
Use pkgcode/variation: U6+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3281EAUT-T Active SOT;6 pin;9 mm²
Outline Drawing: 21-0058 (PDF)
Land Pattern: 90-0175 (PDF)
Use pkgcode/variation: U6-1*
-40°C to +125°C RoHS/Lead-Free: No
Materials Analysis
MAX3281EAUT+T Active SOT;6 pin;9 mm²
Outline Drawing: 21-0058 (PDF)
Land Pattern: 90-0175 (PDF)
Use pkgcode/variation: U6+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3283E Free
Sample Buy Status Package: TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX3283EAUT+ Active SOT;6 pin;9 mm²
Outline Drawing: 21-0058 (PDF)
Land Pattern: 90-0175 (PDF)
Use pkgcode/variation: U6+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
Buy
Buy
Sample
Buy
Buy
Buy
Sample
Buy
MAX3283EAUT-T Active SOT;6 pin;9 mm²
Outline Drawing: 21-0058 (PDF)
Land Pattern: 90-0175 (PDF)
Use pkgcode/variation: U6-1*
-40°C to +125°C RoHS/Lead-Free: No
Materials Analysis
MAX3283EAUT+T Active SOT;6 pin;9 mm²
Outline Drawing: 21-0058 (PDF)
Land Pattern: 90-0175 (PDF)
Use pkgcode/variation: U6+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3284E Free
Sample Buy Status Package: TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX3284EAUT+ Active SOT;6 pin;9 mm²
Outline Drawing: 21-0058 (PDF)
Land Pattern: 90-0175 (PDF)
Use pkgcode/variation: U6+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3284EAUT-T Active SOT;6 pin;9 mm²
Outline Drawing: 21-0058 (PDF)
Land Pattern: 90-0175 (PDF)
Use pkgcode/variation: U6-1*
-40°C to +125°C RoHS/Lead-Free: No
Materials Analysis
MAX3284EAUT+T Active SOT;6 pin;9 mm²
Outline Drawing: 21-0058 (PDF)
Land Pattern: 90-0175 (PDF)
Use pkgcode/variation: U6+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
Didn't Find What You Need?
● Next Day Product Selection Assistance from Applications Engineers
● Parametric Search
● Applications Help
QuickView Technical Documents Ordering Info More Information
Buy
Buy
Sample
Buy
Buy
Buy
Description
Key Features
Applications/Uses
Key Specifications
Diagram
Data Sheet
Application Notes
Design Guides
Engineering Journals
Reliability Reports
Software/Models
Evaluation Kits
Price and Availability
Samples
Buy Online
Package Information
Lead-Free Information
Related Products
Notes and Comments
Evaluation Kits
Document Ref.: 19-2320; Rev 0; 2002-02-07
This page last modified: 2009-08-18
Contact Us • Rate This Page • Mail This Page • Privacy Policy • Legal Notices
Copyright © 2010 by Maxim Integrated Products
