MNDS90LV031A-X REV 1C0 MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vcc = 3.0/3.6V unless otherwise specified
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
Vod1 Differential
Ouput Voltage RL = 100 Ohms Dout-,
Dout+ 250 450 mV 1, 2,
3
DVod1 Change in
Magnitude of Vod1
for complementary
output States
RL = 100 Ohms Dout-,
Dout+ 50 mV 1, 2,
3
Vos Offset Voltage RL = 100 Ohms Dout-,
Dout+ 1.125 1.625 V 1, 2,
3
DVos Change in
Magnitude of Vos
for Complementary
Output States
RL = 100 Ohms Dout-,
Dout+ 50 mV 1, 2,
3
Voh Output Voltage
High RL = 100 Ohms Dout-,
Dout+ 1.85 V 1, 2,
3
Vol Output Voltage
Low RL = 100 Ohms Dout-,
Dout+ .9 V 1, 2,
3
Vih Input Voltage
High 1 Din,
EN, EN* 2.0 Vcc V 1, 2,
3
Vil Input Voltage Low 1 Din,
EN, EN* Gnd 0.8 V 1, 2,
3
IIH Input Current Vin = Vcc or 2.5V, Vcc = 3.6V Din,
EN, EN* +10 uA 1, 2,
3
IIL Input Current Vin = Gnd or 0.4V, Vcc = 3.6V Din,
EN, EN* +10 uA 1, 2,
3
Vcl Input Clamp
Voltage Icl = -8mA, Vcc = 3.0V Din,
EN, EN* -1.5 V 1, 2,
3
Ios Output Short
Circuit Current ENABLED Din = Vcc, Dout + = 0V or
Din = Gnd, Dout- = 0V Dout-,
Dout+ -9.0 mA 1, 2,
3
Ioff Power-off Leakage Vout = 0V or 3.6V
Vcc = 0V or Vcc = Open Dout-,
Dout+ +20 uA 1, 2,
3
Ioz Output TRI-STATE
Current EN = 0.8V and EN* = 2.0V
VOUT = 0V or VCC, VCC = 3.6V Dout-,
Dout+ +10 uA 1, 2,
3
Icc No Load Drivers
Enabled Supply
Current
Din = Vcc or Gnd Vcc 18 mA 1, 2,
3
Iccl Loaded Drivers
Enabled Supply
Current
Rl = 100 ohms All Channels,
Din = Vcc or Gnd (all inputs) Vcc 35 mA 1, 2,
3
Iccz Loaded or No Load
Drivers Disabled
Supply Current
Din = Vcc or Gnd, En = Gnd, En* = Vcc Vcc 12 mA 1, 2,
3
4