Bi-Phase PIN Diode Modulators With Drivers 2696 Series Features Broadband Performance TTL Compatibitity Small Lightweight Package Environmentally Sealed Solder Construction Low Insertion Loss Temperature Range: -40 to +95C Description M/A-COM's miniature 0-1 80 phase shifter is a vectorial phase shift- ing network utilizing PIN diodes together with broadband quadrature hybrid coupler circuits. It is driven by a hybrid-IC, TTL-compatible driver for convenient system applications. It features balanced inser- tion loss in both states, as well as broadband phase response. Applications include antenna beam steering and phase modulation. Environmental These devices are designed to meet the following conditions: Test MIL-STD Method Cond Temperature Cycle 883 1 re Const. Acceleration - ga3 2001 A a Vibration 202 214 Solvent Resistance ; 883 : 20 is Salt Spray m2) A Moisture Resistance 202 106 Maximum Ratings Storage Temp. -65C to +125C Operating Temp. -55C to +95C Specitications Subject to Change Without Notice. 40 6) i J2 p _ _L | _ LSMA JACK (2 PLACES) | - 140 - oom (356) 2a Typical Performance Data 2696-0109 Insertion Loss (dB) a Frequency (GH2) Relative Phase Shift (degrees) 210 15 Frequency (GHz} M/A-COM Inc. / 1011 Pawtucket Boulevard, Lowell, MA 01853 USA . 4-80 Telephone: 800-366-2266 Bi-Phase PIN Diode Modulators 2696 Series 2696-Series Specifications 25C Frequency Insertion Phase Delta _ Transition Switching Operating Range (GHz) VSWR Loss (dB) (Degrees) Time (nS) Time (nS) Power (W) = Part Number 1.60:1 1.8 18048 20 50 0.100 2696-0/01-XY 2.0-4.0 1.60:1 1.8 (8028 300 500 0.500 2696-0102-XY 1.80: 1 2.2 180+ 10 20 50 0.100 2696-0103-XY 4.0-8.0 1.80:1 2.2 180+ 10 300 500 0.500 2696-0 104-XY 1.80:1 28 180+ 10 20 50 0.100 2696-0105-XY 8.0-12.0 1.80:1 2.8 180+ 10 300 500 0.500 2696-0106-XY 2.00: 1 3.3 180+ 15 20 50 0.100 2696-0 107-XY 8.0-16.0 2.00:1 3.3 180+ 15 300 500 0.500 2696-0108-XY 2.00: 1 3.8 180 + 15 20 50 0.100 2696-0109-XY 12.0-18.0 2.00: 3.8 180+ 15 300 500 0.500 2696-01 |0-XY Notes: {. All units include TTL drivers. e 2. Driver current required: +75 mA (typical). - XY Option Table 3. Transition Time measured from 10% to Y 90% of detected RF. x . 4. Switching Time measured from 50% TTL to Bias Voltage Logic Conn. 10% or 90% of detected RF. 5. Specify voltage and logic connector from 0 +5V/-12V 0 = Solder Pin option table. ne - _ ____ | +5V/-SV | SMC Conn 2 +15V/-1SV 2 SMACeonn. 3 + 12V/-12 4 +5 V/-15V Specifications Subject to Change Without Notice. M/A-COM inc. a 1011 Pawtucket Boulevard, Lowell, MA 01853 USA . Telephone: 800-366-2266 4-81