128
AVX offers a broad line of solid Tantalum capacitors in a wide
range of sizes, styles, and ratings to meet any design needs.
This catalog combines into one source AVX’s leaded tanta-
lum capacitor information from its worldwide tantalum oper-
ations.
The TAP is rated for use from -55°C to +85°C at rated
voltage and up to +125°C with voltage derating. There
are three preferred wire forms to choose from which are
available on tape and reel, and in bulk for hand insertion.
Four sizes of molded axials, the TAR series, are also
available. The TAR is fully marked and available on tape and
reel for high speed insertion. The TAA is a hermetically sealed
series also with four case sizes available.
AVX has a complete tantalum applications service available
for use by all our customers. With the capability to prototype
and mass produce solid tantalum capacitors in special
configurations, almost any design need can be fulfilled.
And if the customer requirements are outside our standard
testing, AVX will work with you to define and implement a test
or screening plan.
AVX is determined to become the world leader in tantalum
capacitor technology and has made, and is continuing to
make, significant investments in equipment and research to
reach that end. We believe that the investment has paid off
with the devices shown on the following pages.
Section 3: Introduction
Foreword
Dipped Radial Capacitors
Terminal Wire
Tantalum wire
Resin encapsulation
Tantalum Graphite
Silver
Solder
Manganese
dioxide
Tantalum
pentoxide
SOLID TANTALUM RESIN DIPPED
SERIES TAP
The TAP resin dipped series of miniature tantalum capacitors
is available for individual needs in both commercial and
professional applications. From computers to automotive to
industrial, AVX has a dipped radial for almost any application.
129
Figure 1 Figure 2 Figure 3
Wire Form C Wire Form B Wire Form S
D
H
L
S
d2 (0.079)
min
+
D
L
S
d
H1 + 4 (0.16)
max
D
H1
L
S
d2 (0.079)
min
+
2.0(0.08)
max
Figure 4 Figure 5 Figure 6
Wire Form F Wire Form D Wire Form G
D
H + 3.8 (0.15)
max
L
S
1.10 +0.25
-0.10
(0.4 +0.010
-0.004 )
S
d
0.079 (2)
min
D
H1 max
+0.118
(3.0)
L
+
D
H
L
S
d
Non-Preferred Wire Forms
(Not recommended for new designs)
DIMENSIONS
millimeters (inches)
Preferred Wire Forms
Packaging
Wire Form Figure Case Size L (see note 1) S d Suffixes Available*
CCS Bulk
16.0±4.00 5.00±1.00 0.50±0.05 CRW Tape/Reel
C Figure 1 A - R* (0.630±0.160) (0.200±0.040) (0.020±0.002) CRS Tape/Ammo
B Figure 2 A - J* 16.0±4.00 5.00±1.00 0.50±0.05 BRW Tape/Reel
(0.630±0.160) (0.200±0.040) (0.020±0.002) BRS Tape/Ammo
SCS Bulk
16.0±4.00 2.50±0.50 0.50±0.05 SRW Tape/Reel
S Figure 3 A - J* (0.630±0.160) (0.100±0.020) (0.020±0.002) SRS Tape/Ammo
Non-Preferred Wire Forms
(Not recommended for new designs)
3.90±0.75 5.00±0.50 0.50±0.05
F Figure 4 A - R (0.155±0.030) (0.200±0.020) (0.020±0.002) FCS Bulk
DCS Bulk
D Figure 5 A - H* 16.0±4.00 2.50±0.75 0.50±0.05 DTW Tape/Reel
(0.630±0.160) (0.100±0.020) (0.020±0.002) DTS Tape/Ammo
16.0±4.00 3.18±0.50 0.50±0.05
G Figure 6 A - J (0.630±0.160) (0.125±0.020) (0.020±0.002) GSB Bulk
Similar to 16.0±4.00 6.35±1.00 0.50±0.05
HFigure 1 A - R (0.630±0.160) (0.250±0.040) (0.020±0.002) HSB Bulk
Notes: (1) Lead lengths can be supplied to tolerances other than those above and should be specified in the ordering information.
(2) For D, H, and H1 dimensions, refer to individual product on following pages.
*For case size availability in tape and reel, please refer to pages 133-134.
Dipped Radial Capacitors
Wire Form Outline
SOLID TANTALUM RESIN DIPPED TAP
Preferred Wire Forms
130
+
H
D
Dipped Radial Capacitors
TAP Series
SOLID TANTALUM RESIN DIPPED CAPACITORS
TAP is a professional grade device manufactured with a flame retardant
coating and featuring low leakage current and impedance, very small
physical sizes and exceptional temperature stability. It is designed and
conditioned to operate to +125°C (see page 165 for voltage derating
above 85°C) and is available loose or taped and reeled for auto insertion.
The 15 case sizes with wide capacitance and working voltage ranges
means the TAP can accommodate almost any application.
MAXIMUM CASE DIMENSIONS: millimeters (inches)
TAP
Type
475
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Capacitance Tolerance
K = ±10%
M = ±20%
(For J = ±5% tolerance,
please consult factory)
035
Rated DC Voltage
SCS
Suffix indicating wire form
and packaging
(see page 129)
HOW TO ORDER
Wire C, F, G, H B, S, D
Case H *H1D
A 8.50 (0.330) 7.00 (0.280) 4.50 (0.180)
B 9.00 (0.350) 7.50 (0.300) 4.50 (0.180)
C 10.0 (0.390) 8.50 (0.330) 5.00 (0.200)
D 10.5 (0.410) 9.00 (0.350) 5.00 (0.200)
E 10.5 (0.410) 9.00 (0.350) 5.50 (0.220)
F 11.5 (0.450) 10.0 (0.390) 6.00 (0.240)
G 11.5 (0.450) 10.0 (0.390) 6.50 (0.260)
H 12.0 (0.470) 10.5 (0.410) 7.00 (0.280)
J 13.0 (0.510) 11.5 (0.450) 8.00 (0.310)
K 14.0 (0.550) 12.5 (0.490) 8.50 (0.330)
L 14.0 (0.550) 12.5 (0.490) 9.00 (0.350)
M 14.5 (0.570) 13.0 (0.510) 9.00 (0.350)
N 16.0 (0.630) 9.00 (0.350)
P 17.0 (0.670) 10.0 (0.390)
R 18.5 (0.730) 10.0 (0.390)
131
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 0.1 µF to 330 µF
Capacitance Tolerance: ±20%; ±10% (±5% consult your AVX representative for details)
Rated Voltage DC (VR)+85°C: 6.3 10 16 20 25 35 50
Category Voltage (VC)+125°C: 4 6.3 10 13 16 23 33
Surge Voltage (VS)+85°C: 8 13 20 26 33 46 65
+125°C: 5 9 12 16 21 28 40
Temperature Range: -55°C to +125°C
Environmental Classification: 55/125/56 (IEC 68-2)
Dissipation Factor: 0.04 for CR 0.1-1.5µF
0.06 for CR 2.2-6.8µF
0.08 for CR 10-68µF
0.10 for CR 100-330µF
Reliability: 1% per 1000 hrs. at 85°C with 0.1Ω/V series impedance, 60% confidence level.
Qualification: CECC 30201 - 032
Capacitance Range (letter denotes case size)
Capacitance Rated voltage DC (VR)
µF Code 6.3V 10V 16V 20V 25V 35V 50V
0.1 104 AA
0.15 154 AA
0.22 224 AA
0.33 334 AA
0.47 474 AA
0.68 684 AB
1.0 105 A A A C
1.5 155 A A A A D
2.2 225 A A A A B E
3.3 335 A A A B B C F
4.7 475 A A B C C E G
6.8 685 A B C D D F H
10 106 B C D E E F J
15 156 C D E F F H K
22 226 D E F H H K L
33 336 E F F J J M
47 476 F G J K M N
68 686 G H L N N
100 107 H K N N
150 157 K N N
220 227 M P R
330 337 P R
Values outside this standard range may be available on request.
AVX reserves the right to supply capacitors to a higher voltage rating, in the same case size, than that ordered.
MARKING
Polarity, capacitance, rated DC voltage, and an "A" (AVX
logo) are laser marked on the capacitor body which is made
of flame retardant gold epoxy resin with a limiting oxygen
index in excess of 30 (ASTM-D-2863).
• Polarity
• Capacitance
• Voltage
• AVX logo
• Tolerance code:
±20% = Standard (no marking)
±10% = “K” on reverse side of unit
±5% = “J” on reverse side of unit
16
10µ
A
+
Dipped Radial Capacitors
TAP Series
TECHNICAL SPECIFICATIONS
132
Dipped Radial Capacitors
TAP Series
AVX Case Capacitance DCL DF ESR
Part No. Size µF (µA) % Max. (Ω)
Max. Max. @ 100 kHz
20 volt @ 85°C (13 volt @ 125°C) continued
TAP 336(*)020 J 33 5.2 8 1.4
TAP 476(*)020 K 47 7.5 8 1.2
TAP 686(*)020 N 68 10.8 8 0.9
TAP 107(*)020 N 100 16.0 10 0.6
25 volt @ 85°C (16 volt @ 125°C)
TAP 105(*)025 A 1.0 0.5 4 10.0
TAP 155(*)025 A 1.5 0.5 4 8.0
TAP 225(*)025 A 2.2 0.5 6 6.0
TAP 335(*)025 B 3.3 0.6 6 5.0
TAP 475(*)025 C 4.7 0.9 6 4.0
TAP 685(*)025 D 6.8 1.3 6 3.1
TAP 106(*)025 E 10 2.0 8 2.5
TAP 156(*)025 F 15 3.0 8 2.0
TAP 226(*)025 H 22 4.4 8 1.5
TAP 336(*)025 J 33 6.6 8 1.2
TAP 476(*)025 M 47 9.4 8 1.0
TAP 686(*)025 N 68 13.6 8 0.8
35 volt @ 85°C (23 volt @ 125°C)
TAP 104(*)035 A 0.1 0.5 4 26.0
TAP 154(*)035 A 0.15 0.5 4 21.0
TAP 224(*)035 A 0.22 0.5 4 17.0
TAP 334(*)035 A 0.33 0.5 4 15.0
TAP 474(*)035 A 0.47 0.5 4 13.0
TAP 684(*)035 A 0.68 0.5 4 10.0
TAP 105(*)035 A 1.0 0.5 4 8.0
TAP 155(*)035 A 1.5 0.5 4 6.0
TAP 225(*)035 B 2.2 0.6 6 5.0
TAP 335(*)035 C 3.3 0.9 6 4.0
TAP 475(*)035 E 4.7 1.3 6 3.0
TAP 685(*)035 F 6.8 1.9 6 2.5
TAP 106(*)035 F 10 2.8 8 2.0
TAP 156(*)035 H 15 4.2 8 1.6
TAP 226(*)035 K 22 6.1 8 1.3
TAP 336(*)035 M 33 9.2 8 1.0
TAP 476(*)035 N 47 10.0 8 0.8
50 volt @ 85°C (33 volt @ 125°C)
TAP 104(*)050 A 0.1 0.5 4 26.0
TAP 154(*)050 A 0.15 0.5 4 21.0
TAP 224(*)050 A 0.22 0.5 4 17.0
TAP 334(*)050 A 0.33 0.5 4 15.0
TAP 474(*)050 A 0.47 0.5 4 13.0
TAP 684(*)050 B 0.68 0.5 4 10.0
TAP 105(*)050 C 1.0 0.5 4 8.0
TAP 155(*)050 D 1.5 0.6 4 6.0
TAP 225(*)050 E 2.2 0.8 6 3.5
TAP 335(*)050 F 3.3 1.3 6 3.0
TAP 475(*)050 G 4.7 1.8 6 2.5
TAP 685(*)050 H 6.8 2.7 6 2.0
TAP 106(*)050 J 10 4.0 8 1.6
TAP 156(*)050 K 15 6.0 8 1.2
TAP 226(*)050 L 22 8.8 8 1.0
AVX Case Capacitance DCL DF ESR
Part No. Size µF (µA) % Max. (Ω)
Max. Max. @ 100 kHz
6.3 volt @ 85°C (4 volt @ 125°C)
TAP 335(*)006 A 3.3 0.5 6 13.0
TAP 475(*)006 A 4.7 0.5 6 10.0
TAP 685(*)006 A 6.8 0.5 6 8.0
TAP 106(*)006 B 10 0.5 8 6.0
TAP 156(*)006 C 15 0.8 8 5.0
TAP 226(*)006 D 22 1.1 8 3.7
TAP 336(*)006 E 33 1.7 8 3.0
TAP 476(*)006 F 47 2.4 8 2.0
TAP 686(*)006 G 68 3.4 8 1.8
TAP 107(*)006 H 100 5.0 10 1.6
TAP 157(*)006 K 150 7.6 10 0.9
TAP 227(*)006 M 220 11.0 10 0.9
TAP 337(*)006 P 330 16.6 10 0.7
10 volt @ 85°C (6.3 volt @ 125°C)
TAP 225(*)010 A 2.2 0.5 6 13.0
TAP 335(*)010 A 3.3 0.5 6 10.0
TAP 475(*)010 A 4.7 0.5 6 8.0
TAP 685(*)010 B 6.8 0.5 6 6.0
TAP 106(*)010 C 10 0.8 8 5.0
TAP 156(*)010 D 15 1.2 8 3.7
TAP 226(*)010 E 22 1.7 8 2.7
TAP 336(*)010 F 33 2.6 8 2.1
TAP 476(*)010 G 47 3.7 8 1.7
TAP 686(*)010 H 68 5.4 8 1.3
TAP 107(*)010 K 100 8.0 10 1.0
TAP 157(*)010 N 150 12.0 10 0.8
TAP 227(*)010 P 220 17.6 10 0.6
TAP 337(*)010 R 330 20.0 10 0.5
16 volt @ 85°C (10 volt @ 125°C)
TAP 155(*)016 A 1.5 0.5 4 10.0
TAP 225(*)016 A 2.2 0.5 6 8.0
TAP 335(*)016 A 3.3 0.5 6 6.0
TAP 475(*)016 B 4.7 0.6 6 5.0
TAP 685(*)016 C 6.8 0.8 6 4.0
TAP 106(*)016 D 10 1.2 8 3.2
TAP 156(*)016 E 15 1.9 8 2.5
TAP 226(*)016 F 22 2.8 8 2.0
TAP 336(*)016 F 33 4.2 8 1.6
TAP 476(*)016 J 47 6.0 8 1.3
TAP 686(*)016 L 68 8.7 8 1.0
TAP 107(*)016 N 100 12.8 10 0.8
TAP 157(*)016 N 150 19.2 10 0.6
TAP 227(*)016 R 220 20.0 10 0.5
20 volt @ 85°C (13 volt @ 125°C)
TAP 105(*)020 A 1.0 0.5 4 10.0
TAP 155(*)020 A 1.5 0.5 4 9.0
TAP 225(*)020 A 2.2 0.5 6 7.0
TAP 335(*)020 B 3.3 0.5 6 5.5
TAP 475(*)020 C 4.7 0.7 6 4.5
TAP 685(*)020 D 6.8 1.0 6 3.6
TAP 106(*)020 E 10 1.6 8 2.9
TAP 156(*)020 F 15 2.4 8 2.3
TAP 226(*)020 H 22 3.5 8 1.8
(*) Insert capacitance tolerance code; M for ±20%, K for ±10% and J for ±5%
NOTE: Voltage ratings are minimum values. AVX reserves the right to supply high-
er voltage ratings in the same case size.
RATINGS AND PART NUMBER REFERENCE
133
SOLID TANTALUM RESIN DIPPED TAP
TAPE AND REEL PACKAGING FOR AUTOMATIC COMPONENT INSERTION
TAP types are all offered on radial tape, in reel or ‘ammo’
pack format for use on high speed radial automatic insertion
equipment, or preforming machines.
The tape format is compatible with EIA 468A standard for
component taping set out by major manufacturers of radial
automatic insertion equipment.
Dipped Radial Capacitors
Tape and Reel Packaging
TAP – available in three formats. See page 134 for dimensions.
‘B’ wires for normal automatic insertion on
5mm pitch.
BRW suffix for reel
BRS suffix for ‘ammo’ pack
Available in case sizes A - J
‘C’ wires for preforming.
CRW suffix for reel
CRS suffix for ‘ammo’ pack
Available in case sizes A - R
‘S’ and ‘D’ wire for special applications,
automatic insertion on 2.5mm pitch.
SRW, DTW suffix for reel
SRS, DTS suffix for ‘ammo’ pack
Available in case sizes A - J
P2
P1
H3
H1
P
h
W2
W1
HL
d
T
W
SD
P
P2
P1
H3
H1
P
h
W2
W1
HL
d
T
W
SD
P
P2
P1
H3
H2
H1
P
h
W2
W1
L
d
T
W
SD
PS wire
134
SOLID TANTALUM RESIN DIPPED TAP
Dipped Radial Capacitors
Tape and Reel Packaging
DIMENSIONS:
millimeters (inches)
Description Code Dimension
Feed hole pitch P 12.7 ± 0.30 (0.500 ± 0.010)
Hole center to lead P13.85 ± 0.70 (0.150 ± 0.030)
to be measured at bottom
of clench
5.05 ± 1.00 (0.200 ± 0.040)
for S wire
Hole center to component center P26.35 ± 0.40 (0.250 ± 0.020)
Change in pitch ∆p ± 1.00 (± 0.040)
Lead diameter d 0.50 ± 0.05 (0.020 ± 0.003)
Lead spacing S See wire form table
Component alignment ∆h 0 ± 2.00 (0 ± 0.080)
Feed hole diameter D 4.00 ± 0.20 (0.150 ± 0.008)
Tape width W 18.0 + 1.00 (0.700 + 0.040)
- 0.50 - 0.020)
Hold down tape width W16.00 (0.240) min.
Hold down tape position W21.00 (0.040) max.
Lead wire clench height H 16.0 ± 0.50 (0.630 ± 0.020)
19.0 ± 1.00 (0.750 ± 0.040)
on request
Hole position H19.00 ± 0.50 (0.350 ± 0.020)
Base of component height H218.0 (0.700) min. (S wire only)
Component height H332.25 (1.300) max.
Length of snipped lead L 11.0 (0.430) max.
Total tape thickness T 0.70 ± 0.20 (0.030 ± 0.001)
Carrying card
0.50 ± 0.10 (0.020 ± 0.005)
REEL CONFIGURATION AND
DIMENSIONS:
millimeters (inches)
Diameter 30
(1.18) max.
53 (2.09) max.
80
(3.15)
360 (14.17) max.
45 (1.77) max.
40 (1.57) min.
cardboard with plastic hub.
H ldi t t id
Manufactured from cardboard with plastic hub.
Holding tape outside. Positive terminal leading.
PACKAGING QUANTITIES
For Reels For ‘Ammo’ pack For bulk products
Style Case size No. of pieces
A 1500
B, C, D 1250
TAP E, F 1000
G, H, J 750
K, L, M, N, P, R 500
Style Case size No. of pieces
A, B, C, D 3000
TAP E, F, G 2500
H, J 2000
K, L, M, N, P, R 1000
Style Case size No. of pieces
A to H 1000
TAP J to L 500
M to R 100
AMMO PACK DIMENSIONS
millimeters (inches) max.
Height 360 (14.17), width 360 (14.17), thickness 60 (2.36)
GENERAL NOTES
Resin dipped tantalum capacitors are only available taped in
the range of case sizes and in the modular quantities by case
size as indicated.
Packaging quantities on tape may vary by ±1%.
