A Global Leader in the Design, Development, and Manufacture of Sensors and Magnetic Components www.standexmeder.com www.standexmeder.com Product Solutions PR560 Reed Switch REACH & RoHS Compliant Contact Information: Standex-Meder Electronics Professional grade high voltage medium power applications reed switch with rhodium contacts Designed to give superior life switching relatively heavy loads World Headquarters Physical Characteristics 4538 Camberwell Road A B C D Cincinnati, OH 45209 USA Standex Americas (OH) +1.866.STANDEX Meder Americas (MA) +1.800.870.5385 salesusa@standexmeder.com Standex-Meder Asia (Shanghai) +86.21.37820625 salesasia@standexmeder.com Standex-Meder Europe (Germany) +49.7731.8399.0 info@standexmeder.com 14.2 mm 54.0 mm 2.3 mm 0.6 mm Electrical Characteristics (+1.866.782.6339) info@standexelectronics.com Glass Length (Max.) Overall Length (Max.) Glass Diameter (Max.) Lead Diameter (Nom.) Contact Arrangement Contact Material 1 Power Rating Switching Current (Max.) Carry Current (Max.) Switching Voltage (Max.) 2 Breakdown Voltage (Min. @20AT) 3 Contact Resistance Insulation Resistance (Min.) Contact Capacitance (pf Max.) Form A (SPST), Center Gap Rhodium 10VA maximum 1.0 Amp. DC, 1.0 Amp. AC 1.5 Amp. DC, 1.5 Amp. AC 250 VDC, 250 VAC 600 Volts DC 100 Milliohms 12 10 ohms 0.2 pf 1. The specification for VA rating may sometimes be exceeded for less sensitive (higher AT) switches, and should be decreased for very sensitive (lower AT) switches. Standex-Meder Electronics will run life tests specific to a customer's load upon request. 2. Breakdown voltage is measured in the presence of a radioactive ionising source. Switch leakage current is limited to 100 microamperes 3. Contact resistance measurements are made at 10ma from a 1-volt source, with 50% overdrive, using a 4-wire (Kelvin) measuring system. Contact probes are located on 43 mm centres. Minimum Switching Life with Standard Test Loads, using 20AT switch Voltage Current Life 24 VDC 10 mA 6 5 x 10 100 VDC 100 mA 6 1 x 10 125 VAC 80 mA 6 1 x 10 240 VDC 40 mA 5 2 x 10 Note: End of life is defined as contact resistance exceeding one ohm and/or failure to operate. 240 VAC 40 mA 5 x 10 5 A Global Leader in the Design, Development, and Manufacture of Sensors and Magnetic Components www.standexmeder.com PR560 Reed Switch Operating Characteristics Magnetic Sensitivity (Range - Pull In) Magnetic Sensitivity (Range - Drop Out) Operate Time, including bounce (typ.) Release Time (typ.) Resonant Frequency (typ.) Vibration, 10-2,000 Hz (G's Max.) Shock, 11-ms. 1/2 Sine wave (G's Max.) Operating Temperature Storage Temperature 20 to 40 Ampere Turns (See chart below) 0.6 Milliseconds 0.1 Milliseconds 3.0 kHz 50 G 100 G -40C to + 125C -50C to + 155C Charts Breakdown Voltage Plotted Against Pull-In Ampere Turns Pull-In Ampere Turns Plotted Against Drop-Out Ampere Turns Change In Pull-In Ampere Turns After Switch Lead Cutting Change In Drop-Out Ampere Turns After Switch Lead Cutting Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Standex Electronics: PR560303501 PR560253001