FKC-Series - Fuji Electric Co., Ltd.

DATA SHEET

DIFFERENTIAL PRESSURE (FLOW) TRANSMITTER

The FCX–A2 differential pressure (flow) transmitter accu-

rately measures differential pressure, liquid level, gauge

pressure or flow rate and transmits a proportional 4 to 20mA

signal. The transmitter utilizes a unique micromachined

capacitance silicon sensor with state-of-the-art micropro-

cessor technology to provide exceptional performance and

functionality.

FEATURES

1. High accuracy ±0.07%

0.07% accuracy is a standard feature.

Fuji’s micro-capacitance silicon sensor assures this ac-

curacy for all elevated or suppressed calibration ranges

without additional adjustment.

2. Minimum environmental influence

The “Advanced Floating Cell” design which protects

the pressure sensor against changes in temperature,

static pressure, and overpressure substantially reduces

total measurement error in actual field applications.

3. Fuji/HART® bilingual communications protocol and

FOUNDATION™ fieldbus and Profibus™ compatibil-

ity

FCX–A2 series transmitter offers bilingual communi-

cations to speak both Fuji proprietary protocol and

HART®. Any HART® compatible devices can communi-

cate with FCX–A2. Further, by upgrading electronics

FOUNDATION™ fieldbus and Profibus™ are also avail-

able.

4. Application flexibility

Various options that render the FCX–A2 suitable for

almost any process applications include.

–Analog indicator at either the electronics side or ter-

minal side

–Full range of hazardous area approvals

–Built-in RFI filter and lightning arrester

–5-digit LCD meter with engineering unit

–Stainless steel electronics housing

–Wide selection of materials

5. Programmable output Linearization Function

In addition to Linear and Square Root, output signal can

be freely programmable.

(Up to 14 compensated points at approximation.)

6. Burnout current flexibility (Under Scale: 3.2 to 3.8mA,

Over Scale: 20.8 to 21.6mA)

Burnout signal level is adjustable using Model FXW Hand

Held Communicator (HHC) to comply with NAMUR

NE43.

7. Dry calibration without reference pressure

Thanks to the best combination of unique construction

of mechanical parts (Sensor unit) and high performance

electronics circuit (Electronics unit), reliability of dry

calibration without reference pressure is at equal level

as wet calibration.

FKC11

FKC22

FKC23

FKC25

FKC26

FKC33

FKC35

FKC36

FKC38

FKC43

FKC45

FKC46

FKC48

–0.1 to + 3.2

{–1 to + 32}

–0.1 to + 10

{–1 to + 100 }

–0.1 to + 10

{–1 to + 100 }

–0.1 to + 10

{–1 to + 100 }

–0.1 to + 10

{–1 to + 100 }

–0.1 to + 16

{–1 to + 160 }

–0.1 to + 16

{–1 to + 160 }

–0.1 to + 16

{–1 to + 160 }

–0.1 to + 16

{–1 to + 160 }

–0.1 to + 42

{–1 to + 420 }

–0.1 to + 42

{–1 to + 420 }

–0.1 to + 42

{–1 to + 420 }

–0.1 to + 30

{–1 to + 300 }

+/– 1

{+/– 10 }

+/– 6

{+/– 60 }

+/– 32

{+/– 320 }

+/– 130

{+/– 1300 }

+/– 500

{+/– 5000 }

+/– 32

{+/– 320 }

+/– 130

{+/– 1300 }

+/– 500

{+/– 5000 }

+/– 3000

{+/– 30000 }

+/– 32

{+/– 320 }

+/– 130

{+/– 1300 }

+/– 500

{+/– 5000 }

+/– 3000

{+/– 30000 }

0.1

{1}

0.1

{1}

0.32

{ 3.2 }

1.3

{13}

{50}

0.32

{ 3.2 }

1.3

{13}

{50}

{ 300 }

0.32

{ 3.2 }

1.3

{13}

{50}

{300 }

{10}

{60}

{320 }

130

{1300 }

500

{5000 }

{320 }

130

{1300 }

500

{5000 }

3000

{30000 }

{320 }

130

{1300 }

500

{5000 }

3000

{30000 }

Min.

Type Range limit

[kPa] {m bar}

Static pressure

[MPa] {bar}

Span limit [kPa]

{m bar}

Remark : To minimize environmental influence, span should be greater

than 1/40 of the max. span in most applications.

Max.

FKC...4

SPECIFICATIONS

Functional specifications

Service: Liquid, gas, or vapour

Static pressure, span, and range limit:

–Lower limit of static pressure (vacuum limit) ;

Silicone fill sensor: See Fig. 1

Fluorinated fill sensor: 66kPa abs (500mmHg abs)

at temperature below 60°C

–The maximum span of each sensor can be converted

to different units using factors as below.

1MPa =103KPa=10bar=10.19716kgf/cm2

=145.0377psi

1kpa=10mbar=101.9716mmH2O=4.01463inH2O

Date

EDSX6-114g

Oct. 15, 2003

FKC...4

Over range limit: To maximum static pressure limit

Output signal: 4 to 20mA DC (linear or square root) with

digital signal superimposed on the 4 to

20mA signal

Power supply: Transmitter operates on 10.5V to 45V DC

at transmitter terminals.

10.5V to 32V DC for the units with op-

tional arrester.

Load limitations: see figure below

Programmable output linearization function:

Output signal can be characterized with

“14 points linear approximation func-

tion” from HHC(1).

Note: For communication with HHC(1) (Model: FXW), min. of 250 Ω

required.

Hazardous locations:

“Output Underscale”:

Adjustable within the range 3.2mA to

3.8mA from HHC(1)

3.83.2 420 20.8 21.6 [mA]

Over scale

Burnout

Probable over range

Probable under range

Normal operating range

Under scale

Burnout

Loop-check output:

Transmitter can be configured to provide

constant signal 3.8mA through 21.6mA

by HHC(1).

Temperature limit:

Ambient: – 40 to +85°C

(–20 to +80°C for LCD indicator)

(– 40 to +60°C for arrester option)

(–10 to +60°C for fluorinated oil filled

transmitters)

For explosionproof units (flameproof

or intrinsic safety), ambient tempera-

ture must be within the limits speci-

fied in each standard.

Process: – 40 to +120°C for silicone fill

sensor

–20 to +80°C for fluorinated oil fill sen-

sor

Storage: – 40 to +90°C

Humidity limit: 0 to 100% RH

Communication: With HHC(1) (Model FXW, consult Data

Sheet No. EDS8-47), following informa-

tion can be remotely displayed or recon-

figured.

Note: HHC’s version must be more than

6.0 (or FXW 1– 3), for FCX-

A2.

Zero/span adjustment:

Zero and span are adjustable from the

HHC(1). Zero and span are also adjustable

externally from the adjustment screw

(span adjustment is not available with 9th

digit code “L, P, M, Q, S, N”).

Damping: Adjustable from HHC or local adjustment

unit with LCD display.

The time constant is adjustable between

0.12 to 32 seconds.

Zero elevation/suppression:

–100% to +100% of URL

Normal/reverse action:

Selectable from HHC(1)

Indication: Analog indicator or 5-digit LCD meter, as

specified.

Burnout direction: Selectable from HHC(1)

If self-diagnostic detect transmitter fail-

ure, the analog signal will be driven to ei-

ther “Output Hold”, “Output Overscale”

or “Output Underscale” modes.

“Output Hold”:

Output signal is hold as the value just

before failure happens.

“Output Overscale”:

Adjustable within the range 20.8mA to

21.6mA from HHC(1)

2000

[Ω]

1500

1000

Load resistance

500

250

1533Ω

600ΩOperating

area

24V 45V

10 16.1 50 [ V ]

10.5V

Power voltage

(Note) (1) HHC: Hand Held Communicator

ATEX Ex II 2 GD Ex II 1 GD Ex II 3 GD

- EExd IIC T5/T6 - EExia IIC T4/T5 - EExn IIC T4/T5

Factory Class I II III Class I II III Class I II III

Mutual Div. 1 Div. 1 Div. 2

Groups B thru. G Groups A thru. F Groups A thru. G

CSA Class I II III Class I II III Class I II III

Div. 1 Div. 1 Div. 2

Groups C thru. G Groups A thru. G Groups A thru. G

TIIS Ex do IIB+H2 T4 Ex ia II C T4 (*) —

(*) Approval pending

Type n

Nonincendive

Authorities Flameproof Intrinsic safety

v—

—v

v—

——

Items Display Set

Tag No.

Model No.

Serial No.

Engineering unit

Range limit

Measuring range

Damping

Linear

Square root

Burnout direction

Calibration

Output adjust

Data

Self diagnoses

Printer

External switch lock

Transmitter display

Linearize

Rerange

Output mode

Performance specifications for linear output

Reference conditions, silicone oil fill, 316SS isolating diaphragms,

4 to 20mA analog output in linear mode.

Accuracy rating: (including linearity, hysteresis, and re-

peatability)

Max span above 32kPa model:

For spans greater than 1/10 of URL: ±0.07% of span

For spans below 1/10 of URL:

Max span 1kPa, 6kPa model:

For spans greater than 1/10 of URL: ±0.1% of span

For spans below 1/10 of URL:

Stability: ±0.1% of upper range limit (URL) for 3

years for 6th digit code 3, 5, 6, 8.

Temperature effect:

Effects per 28°C change between the

limits of – 40°C and +85°C

Range code

(6th digit in Code

symbols)

“1”/1kPa

{10mbar}

max. span

“2”/6kPa

{60mbar}

max. span

“3”/32kPa

{320mbar} max.

span

“5”/130kPa

{1300mbar} max.

span

“6”/500kPa

{5000mbar} max.

span

“8”/3000kPa

{30000mbar} max.

span

URL

Span

URL

Span

Total effectZero shift

Overrange effect:

0.1 × URL

Span

± 0.02+0.05 % of span

()

Static pressure effect:

0.1 × URL

Span

± 0.05+0.05 % of span

()

Supply voltage effect:

Less than 0.005% of calibrated span per

RFI effect: Less than 0.2% of URL for the frequen-

cies of 20 to 1000MHz and field strength

30 V/m when electronics covers on.

(Classification: 2-abc: 0.2% span per

SAMA PMC 33.1)

Step response: (without electrical damping)

± 0.125+0.1 % ± 0.15+0.1 %

URL

Span

()

URL

Span

± 0.075+0.0125 % ± 0.095+0.0125 %

Mounting position effect:

Zero shift, less than 0.12kPa {1.2m bar}

for a 10° tilt in any plane.

No effect on span.

This error can be corrected by adjusting

Zero.

Dielectric strength:

500V AC, 50/60Hz 1 min., between cir-

cuit and earth.

Insulation resistance:

More than 100MΩ at 500V DC.

Turn-on time: 4 sec.

Internal resistance for external field indicator:

12Ω or less

()( )

Static pressure code

(5th digit in Code symbols)

“1” / 1kPa{10m bar} sensor

“2” / 6kPa{60m bar} sensor

“2”

“3”

“4”

±0.3% / 1MPa {10bar }

±0.1% / 3.2MPa {32bar }

±0.1% /10MPa {100bar }

±0.1% /16MPa {160bar }

±0.25% /42MPa {420 bar}

Zero shift (% of URL)

0.2 s

Range code Time constant*)Dead time*)

(6th digit in code symbols)

0.8 s

0.5 s

0.3 s

0.2 s

“1”

“2”

“3”

“5” through “8”

*) Faster response is available as option (maximum update rate: 25 times

per second).

Static pressure code

(5th digit in Code symbols)

“1” /1kPa {10m bar} sensor

“2” /6kPa {60 m bar} sensor

“2”

“3”

“4”

Zero shift

(% of URL)

±0.05%/10MPa{100bar}

±0.2% / 1MPa{10bar}

±0.2% / 3.2MPa{32bar}

Performance specifications for square root output

Accuracy rating:

Temperature effect:

Effects per 55°C change between the lim-

its of – 40°C and +85°C

Low flow cut-off: Customer configurable for any point be-

tween 0 to 20% of output

Max span 1kPa, 6kPa model:

± 0.24+0.03125 %/28°C

( )

()

Range code Shift at 20% output point

“1” and “2”

“3” through “8”

± 0.3+0.25 %/28°C

URL

Span

URL

Span

Output Accuracy

50 to 100%

20 to 50%

10 to 20%

±0.1 %

±0.25%

±0.5 %

50 to 100%

20 to 50%

10 to 20%

±0.07 %

±0.175 %

±0.35 %

Span

Output

±(0.02+0.05 × 0.1 × URL/Span)%

±2.5 × (0.02+0.05 × 0.1 × URL/Span)%

±5 × (0.02+0.05 × 0.1 × URL/Span)%

below 0.1 × URLover 0.1 × URL

FKC...4

Notes: * (1) SCS14 per JIS G 5121

Remark: Sensor O-rings: Viton O-ring and teflon gasket

selectable.

Availability of above material design depends on

ranges and static pressure. Refer to “Code sym-

bols”.

Non-wetted parts material:

Electronics housing: Low copper die-cast

aluminum alloy finished with epoxy/

polyurethane double coating (stan-

dard), or 316 stainless steel (SCS14

per JIS G5121), as specified.

Bolts and nuts: Cr-Mo alloy (standard),

304 stainless steel (for static pressure

code “1”, “2”, and “3” only), or 630

stainless steel (for static pressure

code “3” and “4” only). Static pres-

sure rating for code “3” with 304

stainless steel bolts is degraded to

10MPa.

Fill fluid: Silicone oil (standard) or fluori-

nated oil

Mounting bracket: 304 stainless steel

Environmental protection:

IEC IP67 and NEMA 6/6P

Mounting: On 60.5mm(JIS 50A) pipe using mount-

ing bracket, direct wall mounting, or di-

rect process mounting.

Mass{weight}: Transmitter approximately 4.4kg without

options.

Add; 0.5kg for mounting bracket

0.8kg for indicator option

4.5kg for stainless steel housing

option

Optional features

Indicator: A plug-in analog indicator (1.5% accu-

racy) can be housed in the electronics

compartment or in the terminal box of

the housing.

An optional 5-digit LCD meter with engi-

neering unit is also available.

Local adjustment unit with LCD display:

An optional 5-digit LCD meter with Zero/

Span adjustment function, loop-check

function and damping adjustment func-

tion, is available.

Arrester: A built-in arrester protects the electron-

ics from lightning surges.

Lightning surge immunity:

4kV (1.2 × 50µs)

Oxygen service: Special cleaning procedures are followed

throughout the process to maintain all

process wetted parts oil-free.

The fill fluid is fluorinated oil.

Chlorine service: The fill fluid is fluorinated oil.

Degreasing: Process-wetted parts are cleaned, but

the fill fluid is standard silicone oil. Not

for use on oxygen or chlorine measure-

ment.

NACE specification:

Metallic materials for all pressure bound-

ary parts comply with NACE MR-01-75.

ASTM B7M or L7M bolts and 2HM nuts

(Class II) are available.

Static pressure rating for code “3” (16

MPa) is degraded to 10MPa.

Vacuum service: Special silicone oil and filling procedure

are applied.

See Fig. 1.

Optional tag plate: An extra stainless steel tag with cus-

tomer tag data is wired to the transmit-

ter.

Coating of cell: Cell’s surface is finished with epoxy/

polyurethane double coating. Specify if

environment is extremely corrosive.

Physical specifications

Electrical connections:

G1/2, 1/2-14 NPT, Pg13.5, or M20 × 1.5

conduit, as specified.

And 1 conduit or 2 conduits, as specified.

Process connections:

1/4-18 NPT or Rc1/4 on 54mm centers, as

specified.

Meets DIN 19213.

Process-wetted parts material:

–40 60–15 85 120

None-operating

area

2.7

{27}

{40}

Operating pressure

Process temperature[°C ]

{200}

101

{1010}

[kPa abs]

{mbar abs}

Silicone oil (Code:Y,G,N)

Silicone oil (Code:R)

Operating

area

Fig. 1 Relation between process temperature and operating pressure

316 stainless

steel

Hastelloy-C

lining

316 stainless

steel

Monel lining

Tantalum

lining

Hastelloy-C

lining

Monel lining

Tantalum

lining

316 stainless

steel

316 stainless

steel

316 stainless

steel

316 stainless

steel

316 stainless

steel

Hastelloy-C

Monel

Hastelloy-C

316L stainless

steel

Hastelloy-C

316L stainless

steel

+Au coating

Monel

Tantalum

Hastelloy-C

Monel

Tantalum

316 stainless

steel(*1)

316 stainless

steel(*1)

316 stainless

steel(*1)

316 stainless

steel(*1)

316 stainless

steel(*1)

Hastelloy-C

lining

Monel lining

Tantalum

lining

Material

code

(7th digit

in Code

symbols)

Process cover Diaphragm

Wetted

sensor body Vent/drain

ACCESSORIES

Oval flanges: (Model FFP, refer to Data Sheet No.

EDS6-10)

Converts process connection to 1/2-14

NPT or to Rc1/2; in carbon steel or in 316

stainless steel.

Equalizing valves:

(Model FFN, refer to Data Sheet No.

EDS6-10)

Available in Carbon steel or in 316 stain-

less steel and in pressure rating 16MPa

or 42MPa.

Hand-held communicator:

(Model FXW, refer to Data Sheet No.

EDS 8-47)

Z/S board: Parts No.=ZZPFCX4-A070

When Z/S board is mounted on the FCX–

A2 amplifier unit, external adjustment

screw will be available for zero and span

adjustment.

ORDERING INFORMATION

When ordering this instrument, specify:

1. CODE SYMBOLS

2. Measuring range

3. Output orientation (burnout direction) when abnormal-

ity is occurred in the transmitter.

Hold / Overscale (21.6mA) / Underscale (3.2mA)

Unless otherwise specified, output hold function is sup-

plied.

4. Output mode (linear or square root output)

Unless otherwise specified, output mode is linear.

5. Indication method (indicated value and unit) in case of

the actual scale (code D, H, P, S on 9th digit).

6. Tag No. (up to 26 alphanumerical characters), if required.

FKC...4

CODE SYMBOLS

Description Note

Note 1

Note 2

Digit

5, 6, 7

Process

connection

1/4

-18NPT

1/4

-18NPT

1/4

-18NPT

1/4

-18NPT

1/4

-18NPT

1/4

-18NPT

1/4

-18NPT

1/4

-18NPT

Static

pressure

[MPa]

{bar}

–0.1 to

+3.2

{–1 to+32}

–0.1 to+10

{–1 to 100}

–0.1 to+16

{–1 to+160}

–0.1 to+42

{–1 to+420}

–0.1 to+30

{–1 to+300}

–0.1 to+10

{–1 to+100}

4567123

F4KC

8910 11 12 13 14 15

Digit No.

of code

Note 1: (*1) The thread is M12, if 42MPa {420bar} static pressure is specified.

Note 2: (*2) 100: 1 turn down is possible, but should be used at the span greater than

1/40 of the maximum span for better performance.

11V

11J

11H

22V

22J

22H

33V

33J

33H

33M

33T

35V

35J

35H

35M

35T

36V

36J

36H

36M

36T

38V

38J

43V

43J

43H

43M

45V

45J

45H

45M

46V

46J

46H

46M

48V

48J

23B

23L

23U

25B

25L

25U

26B

26L

26U

Oval flange

screw

7/16

-20UNF

7/16

-20UNF

M10 (or M12)(*1)

7/16

-20UNF

7/16

-20UNF

7/16

-20UNF

M10 (or M12)(*1)

7/16

-20UNF

Conduit

connection

1/2

(×1)

1/2

-14NPT (×1)

Pg 13.5 (×1)

M20×1.5 (×1)

Pg 13.5 (×1)

1/2

(×2)

1/2

-14NPT (×2)

Pg 13.5 (×2)

M20×1.5 (×2)

Pg 13.5 (×2)

Span limit (*2)

[kPa]

(m bar)

0.1…1

{1…10}

0.1…6

{1…60}

0.32…32

{3.2…320}

1.3…130

{13…1300}

5…500

{50…5000}

30…3000

{300…30000}

0.32…32

{3.2…320}

1.3…130

{13…1300}

5…500

{50…5000}

30…3000

{300…30000}

0.32…32

{3.2…320}

1.3…130

{13…1300}

5…500

{50…5000}

Process

cover

316 stainless steel

Hast. C lining

Monel lining

Tantalum lining

Hast. C lining

Monel lining

Tantalum lining

Hast. C lining

Monel lining

Tantalum lining

Diaphragm

316L stainless steel

+Au coating

Hast. C

316L stainless steel

+Au coating

Hast. C

316L stainless steel

+Au coating

Hast. C

Monel

Tantalum

316L stainless steel

+Au coating

Hast. C

Monel

Tantalum

316L stainless steel

+Au coating

Hast. C

Monel

Tantalum

316L stainless steel

+Au coating

316L stainless steel

+Au coating

Hast. C

Monel

316L stainless steel

+Au coating

Hast. C

Monel

316L stainless steel

+Au coating

Hast. C

Monel

316L stainless steel

+Au coating

Hast. C

Monel

Tantalum

Hast. C

Monel

Tantalum

Hast. C

Monel

Tantalum

Wetted

cell body

316 stainless steel

Hast. C lining

316 stainless steel

Hast. C lining

316 stainless steel

Hast. C lining

Monel lining

Tantalum lining

316 stainless steel

Hast. C lining

Monel lining

Tantalum lining

316 stainless steel

Hast. C lining

Monel lining

Tantalum lining

316 stainless steel

Hast. C lining

Monel lining

316 stainless steel

Hast. C lining

Monel lining

316 stainless steel

Hast. C lining

Monel lining

316 stainless steel

Hast. C lining

Monel lining

Tantalum lining

Hast. C lining

Monel lining

Tantalum lining

Hast. C lining

Monel lining

Tantalum lining

Combination with 12th

digit code "C, E, P, Q"

are not available.

Description Note

Note 3

Note 4

Digit

4567123

F4KC

8910 11 12 13 14 15

Digit No.

of code

Note 3: (*3) In case of square root output mode, square root scale is not available.

Note 4: (*4) Customer tag number can be engraved on standard stainless steel name plate. If extra tag plate is required, select “Yes”.

Specify “A” or “C” for the 7th

digit code “B”, “L”, or “U”

(*4)

Indicator Arrester

None None

Analog, 0 to 100% linear scale None

Analog, 0 to 100% sq. root scale None (*3)

Analog, custom scale None

Analog, double scale (Linear and sq. root) None

None Yes

Analog, 0 to 100% linear scale Yes

Analog, 0 to 100% sq. root scale Yes (*3)

Analog, custom scale Yes

Analog, double scale (Linear and sq. root) Yes

Digital, 0 to 100% None

Digital, custom scale None

Digital 0 to 100% square root None

Digital, 0 to 100% Yes

Digital, custom scale Yes

Digital 0 to 100% square root Yes

Digital, 0 to 100%

(Local adjustment unit with LCD display) None

Digital, custom scale

(Local adjustment unit with LCD display) None

Digital, 0 to 100% square root

(Local adjustment unit with LCD display) None

Digital, 0 to 100%

(Local adjustment unit with LCD display) Yes

Digital, custom scale

(Local adjustment unit with LCD display) Yes

Digital, 0 to 100% square root

(Local adjustment unit with LCD display) Yes

None (for ordinary locations)

TIIS, Flameproof (Conduit seal) (Available for 4th digit code “A“, “S“)

TIIS, Flameproof (Cable gland seal) (Available for 4th digit code “A“, “S“)

FM, Flameproof (or explosionproof) (Available for 4th digit code “B“, “T“)

CSA, Flameproof (or explosionproof)

(Available for 4th digit code “B“, “T“)

ATEX, Flameproof

TIIS, Intrinsic safety (Approval pending)

FM, Intrinsic safety and Nonincendive

CSA, Intrinsic safety and Nonincendive

ATEX, Intrinsic safety

ATEX, Type n

Vent/drain Mounting bracket

Standard None

Standard Yes, stainless steel

Side None

Side Yes, stainless steel

Extra SS tag plate Stainless steel elec, housing Coating of cell

None None None

Yes None None

None Yes None

Yes Yes None

None None Yes

Yes None Yes

None Yes Yes

Yes Yes Yes

Treatment Fill fluid

Standard Silicone oil

Standard Fluorinated oil

Degreasing Silicone oil

Oxygen service Fluorinated oil (7th digit code “V”, “J” only)

Chlorine service Fluorinated oil (7th digit code “H”, “T”, “B”, “U”)

NACE specification

Silicone oil

(Not available for 7th digit code “T”, “U” and 15th digit code “A”, “B”)

Vacuum service Silicone oil for vacuum use

Viton (O-ring)

Teflon (gasket)

Z/S board

attached.

Approval

pending for

10th digit code

“G, H, J, K, P“

Approval

pending for

10th digit

code “D, E, G,

H, J, K, P“

FKC...4

Description Note

Note 8

Note 5

Note 6

Note 7

Digit

4567123

F4KC

8910 11 12 13 14 15

Digit No.

of code

Note 5: (*5) Static pressure should be –0.1 to +10MPa{–1 to +100bar}.

Note 6: (*6) Available for 5th digit code “1”, “2”, “3”. In case of stainless steel bolt

with 5th digit code “3”, static pressure should be –0.1 to +10MPa {–1 to + 100bar}.

Note 7: (*7) Available for 5th digit code “3”, “4”.

Note 8: (*8) In case of tropical use, select stainless bolts and nuts.

(*5)

(*6)

(*7)

<Bolt/nut> (*8)

Cr-Mo alloy hexagon socket head cap screw/carbon steel nut

Cr-Mo alloy hexagon bolt/nut

NACE bolt/nut (ASTM A193 B7M/A194 2HM)

NACE bolt/nut (ASTM A320 L7M/A194 2HM)

304 stainless steel bolt/304 stainless steel nut

630 stainless steel bolt/304 stainless steel nut

OUTLINE DIAGRAM

(Unit:mm)

< 7th digit code : V, H, M, T, J >

Note 1) Cable gland is supplied in case of 10th digit code "C".

11 cable is suitable.

Note 2) The pressure connector is located on the down side surface of

the detector, when the vent /drain plug is attatched on the upper

side of the detector.

Conduit conn. Press. conn.

DEF H Oval flange screw

1/2

17 8 Rc

1/4

7/16

-20UNF

Screw depth 15

A, S

1/2

-14NPT 16 5

1/4

-18NPT

7/16

-20UNF

Screw depth 15

B, T

Pg13.5 84.5

1/4

-18NPT M10

Screw depth 15

C, V

Pg13.5 84.5

1/4

-18NPT

7/16

-20UNF

Screw depth 15

E, X

4th digit of the

code symbols

M20 1.5 16 5

1/4

-18NPT M10

Screw depth 15

D, W

CK CK

CONNECTION DIAGRAM

(M4 screws)

Electronics

unit

Sensor

unit

104

41.3

Approx. 147

231

(27)

G1/2

ø13

ø15

ø7

58 37

210

ø80

105

123

52.5

120

130

ø80

MTG. pipe JIS 50A

(2B)

U-bolt M8

"A" Press. conn.

Zero ADJ. screw

Fastener

(Flameproof only)

Cable gland

(option)

"C" Conduit conn.

"B" Conduit conn.1

"B" Conduit conn.2

Vent/drain plug

4 Holes

9 Dia.

Detail "B" Detail "C"

82.5

See table 1

Earth terminal

Oval flange screw

See table 1

Side vent

(option)

Press.conn.

(Low pressure side) Press.conn.

(High pressure

side)

With field ind. (option)

Down

(10)

(Conduit conn.)

Detail "A"

(Press. conn.)

ø18.5

In case of 4th digit code "S,V,W,X"

Vent/drain plug

(When the vent/drain plug

attatched on the upper side

of the detector)

4-M8 12

Note 1)

Note 2)

Table 1

FKC...4

4-M8 12

CK CK

G1/2

ø13

ø15

Note 1) Cable gland is supplied in case of 10th digit code "C".

11 cable is suitable.

Conduit conn.

EFH

Oval flange screw

1/2

17 8

7/16

-20UNF

Screw depth 10

A, S

1/2

-14NPT 16 5

7/16

-20UNF

Screw depth 10

B, T

Pg13.5 8 4.5 M10

Screw depth 10

C, V

M20 1.5 16 5 M10

Screw depth 10

D, W

Pg13.5 8 4.5

7/16

-20UNF

Screw depth 10

E, X

4th digit of the

code symbols

CONNECTION DIAGRAM

(M4 screws)

Detail "D"

See table 1

Detail "C"

(Conduit conn.)

Detail "A"

(Press. conn.)

Cable gland

(option)

Note 1)

+0.2

+0.1

ø16

ø12

-0.1

ø4

ø16

1/4

-18NPT

Detail "B"

(Press. conn)

U-bolt M8 Fastener

(Flameproof only)

"D" Conduit conn.

Electronics

unit

Press.conn.

(High pressure

side)

MTG. pipe JIS 50A

(2B)

"A"or"B" Press. conn.

Oval flange screw

See table 1

In case of 4th digit code

"S,V,W,X"

Zero ADJ. screw

Vent/drain plug

"C" Conduit conn.1

"C" Conduit conn.2

With field ind.

4 Holes

9 Dia.

Earth terminal

Press.conn.

(Low pressure side)

Down

(27)

213

234

41.3

104

ø80

120

186

105

52.588

(10)

Sensor

unit

Table 1

< 7th digit code : B, L, U >

The product conforms to the requirements of the

Electromagnetic compatibility Directive 94/9/EC as detailed

within the technical construction file number TN513035.

The applicable standards used to demonstrate compliance

are :

Frequency range

MHz Limits Reference

standard

30 to 230 40dB (µV/m) quasi peak,

measured at 10m distance

230 to 1000 47dB (µV/m) quasi peak,

measured at 10m distance

CISPR16-1 and

CISPR16-2

Phenomenon Test value Basic

standard

Performance

criteria

Electrostatic

discharge

Conducted RF 0.15 to 80MHz

80%AM (1kHz)

Electromagnetic

field

4kV (Contact)

8kV (Air)

80 to 1000MHz

10V/m

80%AM (1kHz)

IEC61000-4-2

Burst

IEC61000-4-3

Rated power

frequency

magnetic field

30A/m

50Hz

IEC61000-4-8

2kV

5kHz

IEC61000-4-4

Surge

1.2µs/50µs

1kV (Line to line)

2kV (Line to ground)

IEC61000-4-5

IEC61000-4-6

EMI (Emission) EN61326 : 1997

Class A (standard for Industrial Location)

EMI (Immunity) EN61326: 1997

Annex A (standard for Industrial Location)

Note) Definition of performance criteria

A: During testing, normal performance within the

specification limits.

B: During testing, temporary degradation, or loss of

function or performance which is self-recovering.

FKC...4

Information in this catalog is subject to change without notice. Printed in Japan

Head office

6-17, Sanbancho, Chiyoda-ku, Tokyo 102-0075, Japan

http://www.fesys.co.jp

Sales Div.

International Sales Dept.

No.1, Fuji-machi, Hino-city, Tokyo, 191-8502 Japan

Phone: 81-42-585-6201, 6202

Fax: 81-42-585-6187

http: //www.fic-net.co.jp

Caution on Safety

*Before using this product, be sure to read its instruction manual in advance.