TNR H SERIES AND HP SERIES High Energy, Low Varistor Voltage Series @H Series pe HY WL. od ol Masten Applet Volliee Maximum ee peal Mig Mode : S 9H. 5.0 | 25.0} 0.6 + | 12H 75 | 25.0| 0.8 -TNROH220K 22(20~24)| |1SH] 17.0] 20.0] 7.5 | 25.0} 08 TNROHQ7OK =| 15 | 19 29 53 | 27(24~30)| FS TNR9H330K _ is | 24 | 36 5 | 2165} 33G0~36)| [23H] 24-9 | 28:0 | 10.0 | 25.0 | 0.8 ) 22 28 42 77 | 39(35~43) (mm) 26 | 34 50 93 | 47(42~52) ; 12 | 16 4 43 | 22(20~24) 15 | 19 29 53 | 27(24~30) TNRIQH330K:| 18 | 24 | 36 10 5 | 65 | 33(30~36) -TNRIZH390K: | 22 | 28 42 77 | 39(35~43) TNRI2H470K'| 26 | 34 | 50 93 | 47(42~52) _TNRISH220K | 12 | 16 24 43 | 22(20~24) TNRISH270K | 15 | 19 29 53 | 27(24~30) TNRISH330K | 18 | 24 36 20 | 10 | 65 | 33(30~36) --TNRISH390K_ | 22 | 28 42 77 | 39(35~43) | 26 | 34 50 93 | 47(42~52) - | 12 | 16 2A 43 | 22(20~24) ~-TNR23H270K 15 | 19 29 53 | 27(24~30) -ENR23H330K | 18 | 24 | 36 40 | 25 | 65 | 33(30~36) -TNR23H300K | 22 | 28 | 42 77 | 39(35~43) 7 y TNR23H470K | 26 | 34 | 50 93 | 47(42~52) Operating Temperature Range 40 ~ +125C Storage Temperature Range 50 ~ +150C ra) c @ HP Series O| < ee A B | aA 2 16 4 43 | 22(20~24) u pt 19 29 53 | 27(24~30) 24 36 100 | 5 | 65 | 33(30~36) 28 42 TT | 39(35~43) NRE: i 34 50 93 | 47(42~52) TNRISHP220K| 12 | 16 | 24 43 | 22(20~24) TNRISHP270K 15 | 19 29 53 | 27(24~30) 2 | 36 200 | 10 | 65 | 33(30~36) 25 max. 28 42 77 | 39(35~43) 30 max. 34 50 93 | 47(42~52) 64 25 max. 16 A 43 | 22(20~24) 45 max. 19 29 53 | 27(24~30) 08 08 24 36 400 | 25 | 65 | 33(30~36) 0.8 08 28 42 77 | 39(35~43) 9 min. } 10-min. 34 50 93 | 47(42~52) 6.0 7.0 Gpecaiing Temperature Range 40 ~ +150C Storage Temperature Range 50 ~ +150C Unit : mm CAT. No. E1006H TNR H SERIES V-I CURVE NIPPON CHEMICON (y) queuing OL OL t OL ob OL ob oO ob OL queuing esinduy| sesTloz/e | V0 b~2-01 WOUND YON | VeOb~-0b WOJBABAA 1U0IND 189, MOLZHEZUNL O0E ebay, Guiduaelg xeW qUeiNg eee) xeW MOLV~MOCCHES @ (y) pueuND oF ot OL b a OL OL oF oO o1 Ol yualng esindiuy 2 oesoz/e : Vz0b~p-0b g IUBLINE PONG | Ve-Oh~y Ob BL ULUOJSAB/A TUOLND Se] oz o OF os i WOESHEFUNL 00 MOBEHEHNL WOLFHELYNL 002g 00g oor queuing efeyee7 KEW HOLP~MHO?CHeI @ eBay, Buldwelg xeW (A) SDVLIOA (A) ANVLION (y) queuing L OL OL b OL OL OL OL OL OL quaung esinduy oesiog/e W0b~r-01 JUBLIND OO | YO b~y-Ob UUOJGABAA JUGLIND 158] 002 jueung eBbeyee) xey MOLP~NHO?SCHS | @ abeyon Buiduay ey (y) jueung ob ot oL oO oF ' OL ot oF ob Ob ot g & _, te ze i r + r TT T = 7 ft queuing esinduay Ha ro Fe tf Z Ho destOze: We0i~e 0} FRA HS rt ==: Ak FF] JUOLIND 1081 | We-O byt Bee c= oe bh 1 BABA JUGLIN YSOL E ct rT a T 7. I = cr a Be ae aaa oz = Ht ft Ht re Ht ese ieee = = a r HS == 0 re ov os 99 + = MOCZHBUNL BS 8 PS) WOLZHEUNL if com isc pfs 001 i) MOEEHBHNL + + + ao HE WOE HBHNL ey +t at Ho i -_ T FEO HEUNL ES ES ss to == == 002 t t = Ht re ==: FF 008 oop queUNg ebeyes) xy (MOZPHE~MOZZHEUNL) AJND I-A @ eBeyp, Buidwep xey (A) SDVLIOA (A) SOVINOA CAT. No. E1006H NIPPON CHEMEFCON | TNR H SERIES @ General Specifications of TNR H Series Operating temperature range : 40C to +125C Storage temperature re range : ~ 50C to +150C Ambient temperature: 208 5c Se Relative humidity :65 + 20% RH | if there is any doubt about the results, measurement | shall be made within the following limits. Ambient temperature : 20+ 5C Relative humidity :65 + 20% RH | The voltage between the two terminals measured at ImA DC is =| called Varistor Voltage. The measurement shall be made as fast as possible to avoid heat effection. Satisfy the specification. | Maximum continuous sinusoidal RMS voltage or Refer to RATINGS. | Maximum continuous DC voltage which may be applided. | Maximum DC voltage to be applied for only 5 minutes. Refer to RATINGS. | The maximum voltage between the terminals, measured { standard impluse current (8/20 ps). Satisfy the specification. | Maximum energy within the +10% varistor voltage change Satisfy the specification. | when 1 impulse 20 msec long is applied. Ve at 85C Vc at 25C 1 Within Ve at 25C x oy % 100 (%/C) +0.05%/C Test Conditions Specifications | After gradually applying the force keeping the u unit fixed | for 10 + 1 second in axial direction, the damage of the | terminals shall be visually examined. Force 10 N (1.0 kgf) Lead diameter 0.6mm. 0.8mm No remarkable damage | The unit shall be secured with its terminal kept vertical and | the weight specified below be applied in the axial direction. | The terminal shall gradually be bend by 90 in one | direction then 90 in the opposite direction, and again back | to original position. The damage of the terminal shall be visually examined. Lead diameter 0.6mm. 0.8mm Force 5N (0.5 kgf) No remarkable damage After repeatedly applying a single harmonic vibration -| (amplitude : | minute vibration frequency cycle (10Hz500Hz 10Hz) to | each three perpendicular directions for 2 hours. Total 6 | hours. The devices shall be visually examined. 0.75mm) double amplitude : 1.5mm with 1 No remarkable damage Dipping the terminal to a Rosin depth for 5 ~ 10 seconds. After dipping the terminal to a depth of 1.5 ~ 2.0mm from the | body in a soldering bath of 230 + 5C for 5 +0.5 seconds, the | terminal shall be visually examined. 75% of the terminals should be covered with solder uniformly. | The terminal shall be dipped into a soldering bath of 350 + 10C to a depth of 1.5 ~ 2.0mm from the body and be held | there for 5+ | seconds. or 0 oo The terminal shall be dipped into a soldering bath of 260 + 5C to a depth of 1.5 ~ 2.0mm from the body and be held : there for 10+1 seconds. AV1mA S +5% No outstanding damage CAT. No. E1006H TNR H SERIES @ Environmental characteristics -| cycles. epee Test Conditions. oe Specifications 0 -- a The specimen shall be subjected 150+2C for 1000+12 AV1mA S+10% | hours without load. -| The specimen shall be subjected to 6042C, 90 to 95%RH | AVImMA S+5% -| for 1000+12 hours without load. -o--| The temperature cycle shown below shall be repeated 50 | AVImA S+5% 40C+3C, 30 minutes +--++150C+2C, 30 minutes No remarkable damage : The specimen shall be subjected to 125+42C with the _. | maximum allowable voltage for 1000 +12 hours. AV1mA S+20% -| The specimen shall be subjected to 60+2C, 90 to 95%RH :| With the maximum allowable voltage for 1000 +12 hours. AVimA S+10% Varistor voltage change of forward direction shall be measured in the test of unipole surge life and DC load life. Varistor voltage change is measured after stored at Standard Test Conditions for 1 to 2 hours. Note : For 42V battery line, please contact our sales office. CAT. No. E1006H