a FEATURES Single-Supply Operation: 4.5 V to 16 V Input Capability Beyond the Rails Rail-to-Rail Output Swing Continuous Output Current: 35 mA Peak Output Current: 250 mA Offset Voltage: 10 mV Max Slew Rate: 6 V/s Stable with 1 F Loads Supply Current APPLICATIONS LCD Reference Drivers Portable Electronics Communications Equipment 16 V Rail-to-Rail Buffer Amplifiers AD8568/AD8569/AD8570 PIN CONFIGURATIONS 6-Lead SOT-23 (RT Suffix) OUT A 1 6 OUT B IN A 2 5 V+ GND 3 4 IN B AD8568 10-Lead MSOP (RM Suffix) OUT A 1 IN A 2 V+ 3 IN B 10 OUT D 9 IN D 8 GND 4 7 IN C OUT B 5 6 OUT C AD8569 GENERAL DESCRIPTION 32-Lead LFCSP (CP Suffix) 32 NC 31 IN B 30 IN A 29 NC 28 NC 27 OUT A 26 OUT B 25 NC The AD8568, AD8569, and AD8570 are low-cost, single-supply buffer amplifiers with rail-to-rail input and output capability. They are optimized for LCD monitor applications and built on an advanced high voltage CBCMOS process. The AD8568 includes two buffers, the AD8569 includes four buffers, and the AD8570 includes eight buffers. These LCD buffers have high slew rates, 35 mA continuous output drive, and high capacitive load drive capability. They have a wide supply range and offset voltages below 10 mV. V+ 1 NC 2 IN C 3 IN D 4 IN E 5 IN F 6 NC 7 V+ 8 24 GND 23 NC 22 OUT C 21 OUT D 20 OUT E 19 OUT F 18 NC 17 GND PIN 1 INDICATOR AD8570 TOP VIEW NC 9 IN G 10 IN H 11 NC 12 NC 13 OUT H 14 OUT G 15 NC 16 The AD8568, AD8569, and AD8570 are specified over the -40C to +85C temperature range. They are available on tape and reel, with the AD8568 packaged in a 6-lead SOT-23, the AD8569 in a 10-lead MSOP, and the AD8570 in a 32-lead LFCSP and 20-lead TSSOP. NC = NO CONNECT 20-Lead TSSOP 1 20 OUT 1 IN 2 2 19 OUT 2 IN 1 18 V- V+ 3 IN 3 4 AD8570-ARU 17 OUT 3 IN 4 5 TOP VIEW 16 OUT 4 IN 5 6 15 OUT 5 IN 6 7 14 OUT 6 V+ 8 REV. C Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 13 V- IN 7 9 12 OUT 7 IN 8 10 11 OUT 8 One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 www.analog.com Fax: 781/326-8703 (c) 2003 Analog Devices, Inc. All rights reserved. AD8568/AD8569/AD8570-SPECIFICATIONS ELECTRICAL CHARACTERISTICS (4.5 V V 16 V, V S CM = VS/2, TA = 25C, unless otherwise noted.) Parameter Symbol Conditions INPUT CHARACTERISTICS Offset Voltage Offset Voltage Drift Input Bias Current VOS VOS/T IB -40C TA +85C Input Voltage Range Input Impedance Input Capacitance OUTPUT CHARACTERISTICS Output Voltage High Output Voltage Low Continuous Output Current Peak Output Current TRANSFER CHARACTERISTICS Gain Gain Linearity POWER SUPPLY Supply Voltage Power Supply Rejection Ratio Supply Current/Amplifier DYNAMIC PERFORMANCE Slew Rate Bandwidth Phase Margin Channel Separation NOISE PERFORMANCE Voltage Noise Density Current Noise Density Min Typ Max 2 5 80 10 -40C TA +85C -0.5 400 1 ZIN CIN VOH VOL IOUT IPK AVCL NL VS PSRR ISY IL = 100 A VS = 16 V, IL = 5 mA -40C TA +85C VS = 4.5 V, IL = 5 mA -40C TA +85C IL = 100 A VS = 16 V, IL = 5 mA -40C TA +85C VS = 4.5 V, IL = 5 mA -40C TA +85C 15.85 15.75 4.2 4.1 mV V/C 600 nA 800 nA -VS + 0.5 V k pF VS - 0.005 15.95 4.38 5 42 95 150 250 300 400 35 250 VS = 16 V RL = 2 k -40C TA +85C RL = 2 k, VO = 0.5 to (VS - 0.5 V) 0.995 0.995 0.9985 0.9980 0.01 4.5 VS = 4 V to 17 V -40C TA +85C VO = VS/2, No Load -40C TA +85C SR BW Oo RL = 10 k, CL = 200 pF -3 dB, RL = 10 k, CL = 10 pF RL = 10 k, CL = 10 pF en en in f = 1 kHz f = 10 kHz f = 10 kHz 70 4 90 700 Unit V V V V V mV mV mV mV mV mA mA 1.005 1.005 V/V V/V % 16 V 850 1 dB A mA 6 6 65 75 V/s MHz Degrees dB 26 25 0.8 nV/Hz nV/Hz pA/Hz Specifications subject to change without notice. -2- REV. C AD8568/AD8569/AD8570 ABSOLUTE MAXIMUM RATINGS* Supply Voltage (VS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V Input Voltage . . . . . . . . . . . . . . . . . . . . . . -0.5 V to VS + 0.5 V Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . VS Storage Temperature Range . . . . . . . . . . . . -65C to +150C Operating Temperature Range . . . . . . . . . . . -40C to +85C Junction Temperature Range . . . . . . . . . . . . -65C to +150C Lead Temperature Range (Soldering, 60 sec) . . . . . . . . 300C *Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Package Type JA1 JC 6-Lead SOT-23 (RT) 10-Lead MSOP (RM) 20-Lead TSSOP (RU) 32-Lead LFCSP (CP) 250 200 72 35 140 44 45 JB2 Unit 13 C/W C/W C/W C/W NOTES 1 JA is specified for worst-case conditions, i.e., JA is specified for a device soldered onto a circuit board for surface-mount packages. 2 JB is applied for calculating the junction temperature by reference to the board temperature. ORDERING GUIDE Model Temperature Range Package Description Package Option Branding Information AD8568ART-R2 AD8568ART-REEL AD8568ART-REEL7 AD8569ARM-R2 AD8569ARM-REEL AD8569ARMZ-REEL* AD8570ACP-R2 AD8570ACP-REEL AD8570ACP-REEL7 AD8570ARU AD8570ARU-REEL -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C 6-Lead SOT-23 6-Lead SOT-23 6-Lead SOT-23 10-Lead MSOP 10-Lead MSOP 10-Lead MSOP 32-Lead LFCSP 32-Lead LFCSP 32-Lead LFCSP 20-Lead TSSOP 20-Lead TSSOP RT-6 RT-6 RT-6 RM-10 RM-10 RM-10 CP-32-2 CP-32-2 CP-32-2 RU-20 RU-20 AWA AWA AWA AXA AXA AXA *Z = Pb-free part. CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the AD8568/AD8569/AD8570 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. REV. C -3- WARNING! ESD SENSITIVE DEVICE AD8568/AD8569/AD8570 -Typical Performance Characteristics 0 100 90 TA = 25C 4.5V < VS < 16V VCM = VS/2 50 VS = 16V INPUT BIAS CURRENT (nA) QUANTITY (Amplifiers) 80 70 60 50 40 30 100 150 VS = 4.5V 200 250 20 300 10 0 12 9 0 3 6 6 3 INPUT OFFSET VOLTAGE (mV) 9 350 12 TPC 1. Input Offset Voltage Distribution 40 25 TEMPERATURE (C) 85 TPC 4. Input Bias Current vs. Temperature 300 5 4.5V < VS < 16V 4 INPUT OFFSET CURRENT (nA) QUANTITY (Amplifiers) 250 200 150 100 50 3 2 1 VS = 4.5V 0 VS = 16V 1 2 3 4 0 0 10 20 30 40 50 60 TCVOS (V/C) 70 80 90 5 100 TPC 2. Input Offset Voltage Drift Distribution 85 4.46 15.96 ILOAD = 5mA VCM = VS /2 15.95 4.45 VS = 16V 0.25 OUTPUT VOLTAGE SWING (V) INPUT OFFSET VOLTAGE (mV) 25 TEMPERATURE (C) TPC 5. Input Offset Current vs. Temperature 0 0.50 VS = 16V 0.75 1.00 VS = 4.5V 1.25 1.50 40 40 25 TEMPERATURE (C) 85 TPC 3. Input Offset Voltage vs. Temperature 15.94 4.44 15.93 4.43 15.92 4.42 15.91 4.41 15.90 4.40 15.89 4.39 VS = 4.5V 4.38 15.88 15.87 4.37 15.86 4.36 40 25 TEMPERATURE (C) 85 TPC 6. Output Voltage Swing vs. Temperature -4- REV. C AD8568/AD8569/AD8570 150 0.80 ILOAD = 5mA VCM = VS /2 SUPPLY CURRENT/AMPLIFIER (mA) OUTPUT VOLTAGE SWING (mV) 135 120 105 90 VS = 4.5V 75 60 45 VS = 16V 30 0.75 VS = 16V 0.70 0.65 0.60 VS = 4.5V 0.55 15 0 40 25 TEMPERATURE (C) 0.50 85 TPC 7. Output Voltage Swing vs. Temperature 25 TEMPERATURE (C) 85 TPC 10. Supply Current/Amplifier vs. Temperature 0.9999 7 4.5V < VS < 16V VOUT = 0.5V TO 15V 6 RL = 2k VS = 16V 5 SLEW RATE (V/s) GAIN ERROR (V/V) 40 0.9997 VS = 4.5V 4 3 2 1 RL = 10k CL = 200pF RL = 600 0.9995 40 25 TEMPERATURE (C) 0 85 40 TPC 8. Voltage Gain vs. Temperature 85 TPC 11. Slew Rate vs. Temperature 1k 1.0 TA = 25C 100 VS = 4.5V 10 TA = 25C AV = +1 VO = VS /2 0.9 SUPPLY CURRENT/AMPLIFIER (mA) OUTPUT VOLTAGE (mV) 25 TEMPERATURE (C) VS = 16V 1 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.1 0.001 0 0.01 0.1 1 LOAD CURRENT (mA) 10 100 2 4 6 8 10 12 SUPPLY VOLTAGE (V) 14 16 18 TPC 12. Supply Current/Amplifier vs. Supply Voltage TPC 9. Output Voltage to Supply Rail vs. Load Current REV. C 0 -5- AD8568/AD8569/AD8570 10 18 5 16 1k 0 14 OUTPUT SWING (V p-p) 10k GAIN (dB) 5 10 560 15 20 25 30 35 150 TA = 25C VS = 8V VIN = 50mV rms CL = 40pF AV = +1 40 100k 10M FREQUENCY (Hz) TA = 25C VS = 16V AV = +1 RL = 10k DISTORTION < 1% 10 100M 100 1k 10k 100k 1M 10M FREQUENCY (Hz) TPC 16. Closed-Loop Output Swing vs. Frequency 160 TA = 25C VS = 8V VIN = 50mV rms RL = 10k AV = +1 5 0 50pF 5 1040pF 10 100pF 15 540pF 20 25 100k 1M 100M 10M FREQUENCY (Hz) 140 120 100 80 +PSRR 60 40 0 20 140 POWER SUPPLY REJECTION RATIO (dB) 450 400 350 VS = 4.5V 250 200 150 100 0 100 VS = 16V 1k 10k 100k FREQUENCY (Hz) 1M 1k 10k 100k FREQUENCY (Hz) 1M 10M TPC 17. Power Supply Rejection Ratio vs. Frequency 160 50 PSRR 20 500 300 TA = 25C VS = 16V 40 100 TPC 14. Frequency Response vs. Capacitive Loading IMPEDANCE () 6 0 1M POWER SUPPLY REJECTION RATIO (dB) GAIN (dB) 10 8 2 25 15 10 4 TPC 13. Frequency Response vs. Resistive Loading 20 12 TA = 25C VS = 4.5V 120 100 +PSRR 80 60 40 20 0 20 40 100 10M PSRR 1k 10k 100k FREQUENCY (Hz) 1M 10M TPC 18. Power Supply Rejection Ratio vs. Frequency TPC 15. Closed-Loop Output Impedance vs. Frequency -6- REV. C AD8568/AD8569/AD8570 1,000 100 16V TA = 25C VS = 4.5V VCM = 2.25V VIN = 100mV p-p AV = +1 RL = 10k 90 80 70 100 OVERSHOOT (%) VOLTAGE NOISE DENSITY (nV/ Hz) TA = 25C 4.5V VS 10 60 50 40 OS 30 +OS 20 10 1 10 1k 100 FREQUENCY (Hz) 0 10 10k TPC 19. Voltage Noise Density vs. Frequency 15 TA = 25C 4.5V < VS < 16V OUTPUT SWING FROM 0V TO V CHANNEL SEPARATION (dB) 1k TPC 22. Small Signal Overshoot vs. Load Capacitance 20 0 100 LOAD CAPACITANCE (pF) 20 40 60 80 100 120 140 TA = 25C VS = 8V RL = 10k 10 5 OVERSHOOT SETTLING TO 0.1% 0 5 UNDERSHOOT SETTLING TO 0.1% 10 160 180 100 15 1k 10k 100k 1M FREQUENCY (Hz) 10M 100M 0 TPC 20. Channel Separation vs. Frequency OVERSHOOT (%) 70 0 50 40 OS 0 0 0 10 100 LOAD CAPACITANCE (pF) 0 0 1k 0 0 0 0 0 TIME (2s/DIV) 0 0 TPC 24. Large Signal Transient Response TPC 21. Small Signal Overshoot vs. Load Capacitance REV. C 0 0 +OS 20 0 10 TA = 25C VS = 16V AV = +1 RL = 10k CL = 300pF 0 60 30 2.0 1.5 0 TA = 25C VS = 16V VCM = 8V VIN = 100mV p-p AV = +1 RL = 10k VOLTAGE (3V/DIV) 80 1.0 SETTLING TIME (s) TPC 23. Settling Time vs. Step Size 100 90 0.5 -7- 0 AD8568/AD8569/AD8570 0 0 TA = 25C VS = 4.5V AV = +1 RL = 10k CL = 300pF VOLTAGE (1V/DIV) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TIME (2s/DIV) 0 0 0 0 0 0 0 0 0 0 TIME (1s/DIV) 0 0 TPC 25. Large Signal Transient Response TPC 27. Small Signal Transient Response 0 0 TA = 25C VS = 16V AV = +1 RL = 10k CL = 100pF 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TIME (1s/DIV) 0 0 0 0 0 TPC 26. Small Signal Transient Response 0 TA = 25C VS = 16V AV = +1 RL = 10k 0 VOLTAGE (3V/DIV) 0 VOLTAGE (50mV/DIV) 0 0 0 0 TA = 25C VS = 4.5V AV = +1 RL = 10k CL = 100pF 0 VOLTAGE (50mV/DIV) 0 0 0 0 0 0 TIME (40s/DIV) 0 0 0 TPC 28. No Phase Reversal -8- REV. C AD8568/AD8569/AD8570 This family of buffers is designed to drive large capacitive loads in LCD applications. Each has high output current drive and railto-rail input/output operation and can be powered from a single 16 V supply. They are also intended for other applications where low distortion and high output current drive are needed. Figure 1 shows the maximum power dissipation versus temperature. To achieve proper operation, use the previous equation to calculate PDISS for a specific package at any given temperature, or see Figure 1. 1.00 MAXIMUM POWER DISSIPATION - W APPLICATIONS Theory of Operation Input Overvoltage Protection As with any semiconductor device, whenever the input exceeds either supply voltage, attention needs to be paid to the input overvoltage characteristics. As an overvoltage occurs, the amplifier could be damaged, depending on the voltage level and the magnitude of the fault current. When the input voltage exceeds either supply by more than 0.6 V, the internal pn junctions will allow current to flow from the input to the supplies. This input current is not inherently damaging to the device as long as it is limited to 5 mA or less. If a condition exists using the buffers where the input exceeds the supply by more than 0.6 V, an external series resistor should be added. The size of the resistor can be calculated by using the maximum overvoltage divided by 5 mA. This resistance should be placed in series with the input exposed to an overvoltage. Output Phase Reversal The buffer family is immune to phase reversal. Although the device's output will not change phase, large currents due to input overvoltage could damage the device. In applications where the possibility exists of an input voltage exceeding the supply voltage, overvoltage protection should be used as described in the previous section. 0.75 10-LEAD MSOP 6-LEAD SOT-23 0.50 0.25 0 35 10 THD + N - % 1 0.1 REV. C VS = 2.5V VS = 8V 0.01 PDISS = (TJMAX - TA ) / JA where: VS = the supply voltage. VOUT = the output voltage. ILOAD = the output load current. 85 The buffer family features low THD+N. The total harmonic distortion plus noise for the buffer over the entire supply range is below 0.08%. When the device is powered from a 16 V supply, the THD+N stays below 0.03%. Figure 2 shows the AD8568 THD+N versus frequency performance. The maximum safe junction temperature, TJMAX, is 150C. Using the following formula, we can obtain the maximum power that the buffer family can safely dissipate as a function of temperature. PDISS = (VS - VOUT ) x I LOAD 65 Total Harmonic Distortion + Noise (THD+N) The maximum allowable internal junction temperature of 150C limits the device's maximum power dissipation. As the ambient temperature increases, the maximum power dissipated by the device must decrease linearly to maintain the maximum junction temperature. If this maximum junction temperature is exceeded momentarily, the device will still operate properly once the junction temperature is reduced below 150C. If the maximum junction temperature is exceeded for an extended period of time, overheating could lead to permanent damage of the device. The power dissipated by the device can be calculated as 5 25 45 AMBIENT TEMPERATURE - C Figure 1. Maximum Power Dissipation vs. Temperature for 6- and 10-Lead Packages Power Dissipation where: PDISS = the power dissipation. TJMAX = the maximum allowable junction temperature (150C). TA = the ambient temperature of the circuit. JA = the AD856x package thermal resistance, junction-to-ambient. 15 20 100 1k FREQUENCY - Hz 10k 30k Figure 2. AD8568 THD+N vs. Frequency Short-Circuit Output Conditions The buffer family does not have internal short-circuit protection circuitry. As a precautionary measure, do not short the output directly to the positive power supply or to ground. It is not recommended to operate the AD856x with more than 35 mA of continuous output current. The output current can be limited by placing a series resistor at the output of the amplifier whose value can be derived using the following equation. RX VS 35 mA For a 5 V single-supply operation, RX should have a minimum value of 143 . -9- AD8568/AD8569/AD8570 OUTLINE DIMENSIONS 6-Lead Small Outline Transistor Package [SOT-23] (RT-6) 10-Lead Micro Small Outline Package [MSOP] (RM-10) Dimensions shown in millimeters Dimensions shown in millimeters 2.90 BSC 6 5 3.00 BSC 4 1 2 4.90 BSC 3.00 BSC 3 1 PIN 1 0.50 BSC 1.90 BSC 0.95 0.85 0.75 1.45 MAX 0.15 MAX 5 PIN 1 0.95 BSC 1.30 1.15 0.90 6 10 2.80 BSC 1.60 BSC 0.50 0.30 0.22 0.08 1.10 MAX 0.15 0.00 10 4 0 SEATING PLANE 0.60 0.45 0.30 0.27 0.17 SEATING PLANE 0.23 0.08 8 0 0.80 0.60 0.40 COPLANARITY 0.10 COMPLIANT TO JEDEC STANDARDS MO-187BA COMPLIANT TO JEDEC STANDARDS MO-178AB 32-Lead Lead Frame Chip Scale Package [LFCSP] 5 x 5 mm Body (CP-32-2) Dimensions shown in millimeters 5.00 BSC SQ 0.60 MAX 25 24 PIN 1 INDICATOR 3.25 3.10 SQ 2.95 BOTTOM VIEW 0.50 0.40 0.30 12 MAX 32 1 0.50 BSC 4.75 BSC SQ TOP VIEW 1.00 0.85 0.80 PIN 1 INDICATOR 0.60 MAX 17 16 9 8 0.25 MIN 3.50 REF 0.80 MAX 0.65 TYP 0.05 MAX 0.02 NOM SEATING PLANE 0.30 0.23 0.18 0.20 REF COPLANARITY 0.08 COMPLIANT TO JEDEC STANDARDS MO-220-VHHD-2 -10- REV. C AD8568/AD8569/AD8570 OUTLINE DIMENSIONS 20-Lead Thin Shrink Small Outline Package [TSSOP] (RU-20) Dimensions shown in millimeters 6.60 6.50 6.40 20 11 4.50 4.40 4.30 1 6.40 BSC 10 PIN 1 0.65 BSC 0.15 0.05 1.20 MAX 0.20 0.09 0.30 COPLANARITY 0.19 0.10 SEATING PLANE 8 0 0.75 0.60 0.45 COMPLIANT TO JEDEC STANDARDS MO-153AC Revision History Location Page 12/03--Data Sheet changed from REV. B to REV. C. Updated ORDERING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Updated OUTLINE DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5/02--Data Sheet changed from REV. A to REV. B. Added 20-Lead TSSOP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Added Package Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Updated ORDERING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Added TSSOP Package to OUTLINE DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 REV. C -11- -12- C02612-0-12/03(C)