1N4001 THRU 1N4007 Features Low Current Leakage Epoxy Meets UL 94 V-0 Flammability Rating Moisture Sensitivity Level 1 Halogen Free Available Upon Request By Adding Suffix "-HF" Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix Designates Compliant. See Ordering Information) * * * * * 1.0 Amp Rectifier 50 to 1000 Volts Maximum Ratings * * * * * Operating Junction Temperature Range: -55C to +150C Storage Temperature Range: -55C to +150C Typical Thermal Resistance: 35C/W Junction to Case (Note 2) Typical Thermal Resistance: 25C/W Junction to Lead(Note 2) Typical Thermal Resistance: 50C/W Junction to Ambient(Note 2) MCC Part Number Device Marking 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 DO-41 Maximum Maximum DC Recurrent Maximum Blocking Peak Reverse RMS Voltage Voltage Voltage 50V 100V 200V 400V 600V 800V 1000V 35V 70V 140V 280V 420V 560V 700V 50V 100V 200V 400V 600V 800V 1000V D A Electrical Characteristics @ 25C Unless Otherwise Specified Average Forward Current IF(AV) 1.0A TA=75C Peak Forward Surge Current IFSM 30A 8.3ms,Half Sine Maximum Instantaneous Forward Voltage VF 1.0V IFM=1.0A; TJ=25C(Note 3) Maximum DC Reverse Current At Rated DC Blocking Voltage IR 5.0A 50A TJ=25C; TJ=125C Typical Junction Capacitance CJ 15pF Measured at 1.0MHz VR=4.0V Typical Reverse Recovery Time trr 2.0S IF=0.5A; IR=1.0A; Irr=0.25A Rating for fusing 2 Maximum Full Load Reverse Current It IR(AV) 2 Cathode Mark B D C 3.7A S t<8.3ms 30A Full Cycle Average 0.375" Lead Length TL = 75 C DIM A B C D DIMENSIONS INCHES MM MIN MAX MIN MAX 0.160 0.205 4.10 5.20 0.080 0.107 2.00 2.70 0.028 0.034 0.71 0.90 1.000 ----- 25.40 ----- NOTE Note: 1. High Temperature Solder Exemption Applied,See EU Directive Annex 7a. 2.At 0.375" Lead Length P.C.B. Mounted. 3.Pulse Test: Puls Width 300 usec, Duty Cycle 2%. Rev.3-3-12012020 1/3 MCCSEMI.COM 1N4001 THRU 1N4007 Curve Characteristics Fig. 2 - Typical Reverse Leakage Characteristics Fig. 1 - Typical Instantaneous Forward Characteristics 100 1 0.1 TJ=25C 0.01 0.6 0.8 1.0 1.4 1.2 10 TJ=125C 1 0.01 20 80 120 100 Fig. 4 - Maximum Non-Repetitive Peak Forward Surge Current 30 1.0 0.8 0.6 0.4 Resistive or Inductive Load 25 50 75 100 125 25 20 15 10 5 0 150 Ambient Temperature (C) Rev.3-3-12012020 60 Fig. 3 - Forward Current Derating Curve 1.2 0 40 Percent of Rated Peak Reverse Voltage (%) 35 0.0 TJ=25C 0.1 1.4 0.2 TJ=75C Instantaneous Forward Voltage (V) Peak Forward Surge Current (A) Average Forward Current (A) Instantaneous Reverse Leakage Current (A) Instantaneous Forward Current (A) 10 8.3 ms Single Half Sine-Wave 1 10 100 Number of Cycles at 60 Hz 2/3 MCCSEMI.COM 1N4001 THRU 1N4007 Ordering Information Device Packing (Part Number)-TP Tape&Reel: 5Kpcs/Reel (Part Number)-AP Ammo Packing: 5Kpcs/Ammo Box (Part Number)-BP Bulk:1Kpcs/Box,50Kpcs/Carton Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. Micro Commercial Components Corp. products are sold subject to the general terms and conditions of commercial sale, as published at https://www.mccsemi.com/Home/TermsAndConditions. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-3-12012020 3/3 MCCSEMI.COM