MCCSEMI.COM
1/3
1N4001 THRU 1N4007
Features
Maximum Ratings
1.0 Amp
Rectifier
50 to 1000 Volts
Electrical Characteristics @ 25°C Unless Otherwise Specied
Note: 1. High Temperature Solder Exemption Applied,See EU Directive Annex 7a.
2.At 0.375" Lead Length P.C.B. Mounted.
3.Pulse Test: Puls Width 300 usec, Duty Cycle 2%.
•Operating Junction Temperature Range: -55⁰C to +150⁰C
•Storage Temperature Range: -55⁰C to +150⁰C
•Typical Thermal Resistance: 35⁰C/W Junction to Case (Note 2)
•
•Typical Thermal Resistance: 25⁰C/W Junction to Lead(Note 2)
•Typical Thermal Resistance: 50⁰C/W Junction to Ambient(Note 2)
•Low Current Leakage
•Epoxy Meets UL 94 V-0 Flammability Rating
•Moisture Sensitivity Level 1
•Halogen Free Available Upon Request By Adding Suffix "-HF"
•Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix Designates
Compliant. See Ordering Information)
1N4007 1N4007 1000V 700V 1000V
1N4005 1N4005 600V 420V 600V
1N4006 1N4006 800V 560V 800V
1N4003 1N4003 200V 140V 200V
1N4004 1N4004 400V 280V 400V
1N4001 1N4001 50V 35V 50V
1N4002 1N4002 100V 70V 100V
MCC
Part Number
Device
Marking
Maximum
Recurrent
Peak Reverse
Voltage
Maximum
RMS Voltage
Maximum DC
Blocking
Voltage
Typical Reverse
Recovery Time trr 2.0μSIF=0.5A; IR=1.0A;
Irr=0.25A
Rating for fusing I2t3.7A2St<8.3ms
Maximum DC Reverse
Current At Rated DC
Blocking Voltage
IR
5.0μA
50μA
TJ=25⁰C;
TJ=125⁰C
Typical Junction
Capacitance CJ15pF Measured at 1.0MHz
VR=4.0V
Peak Forward Surge
Current IFSM 30A 8.3ms,Half Sine
Maximum
Instantaneous Forward
Voltage
VF1.0V IFM=1.0A;
TJ=25⁰C(Note 3)
Average Forward
Current IF(AV) 1.0A TA=75⁰C
DO-41
A
B
C
D
D
Cathode Mark
Rev.3-3-12012020
MIN MAX MIN MAX
A 0.160 0.205 4.10 5.20
B 0.080 0.107 2.00 2.70 Φ
C 0.028 0.034 0.71 0.90 Φ
D 1.000 ----- 25.40 -----
DIMENSIONS
DIM INCHES MM NOTE
Maximum Full Load
Reverse Current IR(AV) 30μA Full Cycle Average 0.375"
Lead Length TL = 75 °C
MCCSEMI.COM
2/3
Curve Characteristics
1N4001 THRU 1N4007
0.01
0.1
1
10
0.6 1.4
0.8 1.0 1.2
Instantaneous Forward Current (A)
TJ=25°C
Fig. 1 - Typical Instantaneous Forward Characteristics
Instantaneous Forward Voltage (V)
20 120
0.01
0.1
1
10
100
TJ=125°C
TJ=75°C
Instantaneous Reverse Leakage Current (μA)
Fig. 2 - Typical Reverse Leakage Characteristics
TJ=25°C
40 60 80 100
Percent of Rated Peak Reverse Voltage (%)
0 25 50 75 100 125 150
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
Average Forward Current (A)
Ambient Temperature (°C)
Resistive or Inductive Load
Fig. 3 - Forward Current Derating Curve
1 100
0
5
10
15
20
25
30
35
Peak Forward Surge Current (A)
8.3 ms Single Half Sine-Wave
Fig. 4 - Maximum Non-Repetitive Peak Forward Surge
Current
10
Number of Cycles at 60 Hz
Rev.3-3-12012020
MCCSEMI.COM
3/3
Ordering Information
1N4001 THRU 1N4007
Rev.3-3-12012020
Device Packing
(Part Number)-TP
Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF
(Part Number)-AP
(Part Number)-BP
Tape&Reel: 5Kpcs/Reel
Ammo Packing: 5Kpcs/Ammo Box
Bulk:1Kpcs/Box,50Kpcs/Carton
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages. Micro Commercial Components Corp. products are sold subject
to the general terms and conditions of commercial sale, as published at
https://www.mccsemi.com/Home/TermsAndConditions.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express
written approval of Micro Commercial Components Corporation.
***CUSTOMER AW ARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.