VDRP-480S-48 - V-Infinity - Datasheet.Directory



•

V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258

VDRP-480S-48 Single Output DIN Rail Power Supply

DC output voltage 48V

Output rated current 10A

Output current range 0~10A

Rated output power 480W

Ripple & noise 120mVp-p

Voltage adj. range 48~55V

Voltage tolerance ±1.0%

Line regulation ±0.5%

Load regulation ±1.0%

Setup, rise, hold time 1200ms, 40ms, 20ms/230VAC, 115VAC at full load

Input voltage range 180 ~ 264VAC by switch 254 ~ 370VDC

Frequency range 47 ~ 63Hz

Power factor 0.7/230VAC only

Efficiency 89%

AC current 11A/115VAC 4A/230VAC

Inrush current cold start 50A/230VAC 30A/115VAC

Leakage current <3.5mA / 240VAC

Overload protection 105 ~ 150% rated output power

type : Constant current limiting, recovers automatically after fault condition is removed

Over voltage protection 59~66V Protection type : Shut down o/p voltage, re-power on to recover

Over temp. protection 100 5 (TSW : Detect on heatsink of power switch)

Protection type : Shut down o/p voltage, recovers automatically after temperature goes down

Working temperature -20 ~ +70°C (Refer to output load derating curve)

Working humidity 20 ~ 90% RH non-condensing

Storage temp., humidity -20 ~ +85°C , 10 ~ 95% RH

Temperature coefficient ±0.03%/°C (0 ~ 50°C)

Vibration 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

Safety standards UL508, TUV EN60950 Approved

Withstand voltage I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC for 1 min.

Isolation resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC

EMI conductive & radiation Compliance to EN55022 (CISPR22) EN61204-3 Class B

Harmonic current Compliance to EN61000-3-2,-3

EMS immunity Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61204-3, EN61000-6-2 (EN50082-2)

Heavy industry level, criteria A

MTBF 180.9Khrs min. MIL-HDBK-217F (25 )

Dimensions 8.94x4.93x3.94 inches (227x125.2x100mm )

Weight 5.73 lbs (2.6Kg Kgs)

Notes: 1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient

2. Tolerance includes set up tolerance, line regulation, load regulation

3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor

*V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to verify the most

up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer ’s applications using V-Infinity products other than

repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s published specifications. Nothing will be covered outside of standard product warranty.

Features

·Built-in passive PFC function compliance to EN61000-3-2

·High efficiency 89% and low dissipation

·Protections:Short circuit/Over load/Over voltage/Over

temperature

·Cooling by free air convection

·Built-in constant current limiting circuit

·Can be installed on DIN rail TS-35/7.5 or 15

·UL 508(industrial control equipment)approved

·EN61000-6-2(EN50082-2) industrial immunity level

·100% full load burn-in test

·3 year warranty