FDN360P Rev F1 (W)
Electrical Characteristics TA = 25°C unless otherwise noted
Symbol
Parameter Test Conditions Min Typ
Max
Units
Off Characteristics
BVDSS Drain–Source Breakdown Voltage VGS = 0 V, ID = –250 µA –30 V
∆BVDSS
∆TJ Breakdown Voltage Temperature
Coefficient ID = –250 µA, Referenced to 25°C –22 mV/°C
VDS = –24V, VGS = 0 V –1 µA
IDSS Zero Gate Voltage Drain Current VDS = –24V, VGS = 0 V, TJ=55°C –10
IGSSF Gate–Body Leakage, Forward VGS = 20 V, VDS = 0 V 100 nA
IGSSR Gate–Body Leakage, Reverse VGS = –20 V, VDS = 0 V –100 nA
On Characteristics (Note 2)
VGS(th) Gate Threshold Voltage VDS = VGS, ID = –250 µA –1 –1.9 –3 V
∆VGS(th)
∆TJ Gate Threshold Voltage
Temperature Coefficient ID = –250 µA, Referenced to 25°C
4 mV/°C
RDS(on) Static Drain–Source
On–Resistance VGS = –10 V, ID = –2 A
VGS = –10 V, ID = –2 A, TJ=125°C
VGS= –4.5 V, ID = –1.5A
63
90
100
80
136
125
mΩ
ID(on) On–State Drain Current VGS = –10 V, VDS = –5 V –10 A
gFS Forward Transconductance VDS = –5 V, ID = –2 A 5 S
Dynamic Characteristics
Ciss Input Capacitance 298 pF
Coss Output Capacitance 83 pF
Crss Reverse Transfer Capacitance
VDS = –15 V, V GS = 0 V,
f = 1.0 MHz 39 pF
Switching Characteristics (Note 2)
td(on) Turn–On Delay Time 6 12 ns
tr Turn–On Rise Time 13 23 ns
td(off) Turn–Off Delay Time 11 20 ns
tf Turn–Off Fall Time
VDD = –15 V, ID = –1 A,
VGS = –10 V, RGEN = 6 Ω
6 12 ns
Qg Total Gate Charge 6.2 9 nC
Qgs Gate–Source Charge 1 nC
Qgd Gate–Drain Charge
VDS = –15V, ID = –3.6 A,
VGS = –10 V
1.2 nC
Drain–Source Diode Characteristics and Maximum Ratings
IS Maximum Continuous Drain–Source Diode Forward Current –0.42
A
VSD Drain–Source Diode Forward
Voltage VGS = 0 V, IS = –0.42 A (Note 2) –0.8 –1.2 V
Notes:
1. RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of
the drain pins. RθJC is guaranteed by design while RθCA is determined by the user's board design.
a) 250°C/W when mounted on a
0.02 in2 pad of 2 oz. copper.
b) 270°C/W when mounted on a
minimum pad.
Scale 1 : 1 on letter size paper
2. Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%
FDN360P