z z z z ! " z z # $ % ! # & '( !# ) ! DO-201AD z *+ z , * +'--./.!+ ./0 z * z ) *12. ,3 425 z + * z + * 6, Dim Min Max Min Max A 25.40 -- 1.000 -- B 8.50 9.50 0.334 0.374 C 1.20 1.30 0.047 0.051 D 5.00 5.60 0.197 0.220 In mm In inch !"# $% $ $&%'()% & & $ * $ $ & $ % $ +,- #$./ &/&0 $" 1 ."#$./&0 $" 23 ."0 $" /6!/&0 $" 0 0 0 4 5 0 0 5 0 7&$"/ 8 9 : ; < 4 7 7 =/ &#$.* $ !" 4 !" $ =$& $ $ 9>?2?6 : @ < * $ 0 $" 47 < ;57 0 #$./& 7 /$ 23 ."0 $" < 7 , $> $ $ $9 : * / A1 =' B , $ $/ $> 7+ 8 $ "$ ! $" $ /$" 5@ % ; ; 0 0$ & $ $ $. $ $+ $ $ $ $ ; $ 6$ $ 6()$ $ && $" 502 * 221 West Industry Court ! Deer Park, NY 11729-4681 ! (631) 586-7600 FAX (631) 242-9798 * * World Wide Web Site - http://www.sensitron.com * E-Mail Address - sales@sensitron.com * Data Sheet 2811, Rev. 30 Single Phase Half-Wave 60 Hz Resistive or Inductive Load 9.5mm Lead Length 3 2 1 0 10 50 100 150 IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE OUTPUT CURRENT (A) 4 10 1.0 Tj = 25C Pulse Width = 300s 2% Duty Cycle 0.1 0.1 Cj, JUNCTION CAPACITANCE (pF) IFSM , PEAK FORWARD SURGE CURRENT (A) 0.7 1000 100 80 60 40 20 8.3ms Single Half Sine-Wave JEDEC Method 0 1 10 NUMBER OF CYCLES AT 60 Hz Fig. 3 Peak Forward Surge Current 0.5 0.9 1.1 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Voltage Characteristics TL, LEAD TEMPERATURE (C) Fig. 1 Forward Current Derating Curve * 0.3 100 Tj = 25C f = 1MHz 100 10 0.1 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 221 West Industry Court ! Deer Park, NY 11729-4681 ! (631) 586-7600 FAX (631) 242-9798 * * World Wide Web Site - http://www.sensitron.com * E-Mail Address - sales@sensitron.com * SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. * 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 * * World Wide Web - http://www.sensitron.com * E-Mail Address - sales@sensitron.com *