MCC TM Micro Commercial Components 6A05 THRU 6A10 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features * * * * * * Halogen free available upon request by adding suffix "-HF" High Current Capability and Low Leakage Low Forward Voltage Drop Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 6 Amp Rectifier 50 - 1000 Volts Maximum Ratings * * * R-6 Operating Temperature: -55C to +125C Storage Temperature: -55C to +150C Maximum Thermal Resistance; 10 C/W Junction To Ambient MCC Catalog Number Device Marking 6A05 6A1 6A2 6A4 6A6 6A8 6A10 6A05 6A1 6A2 6A4 6A6 6A8 6A10 Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage Maximum DC Blocking Voltage D 35V 70V 140V 280V 420V 560V 700V 50V 100V 200V 400V 600V 800V 1000V A Cathode B D Electrical Characteristics @ 25C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance IF(AV) 6.0A TA = 60C IFSM 400A 8.3ms, half sine C VF 0.95V IFM = 6.0A; TJ = 25C(Note 2) IR 10A 100A TJ = 25C TJ = 100C CJ 150pF Measured at 1.0MHz, VR=4.0V DIMENSIONS DIM A B C D INCHES MIN .340 .340 .048 1.000 MAX .360 .360 .052 --- MM MIN 8.60 8.60 1.20 25.40 MAX 9.10 9.10 1.30 --- NOTE Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. 2.Pulse test: Pulse width 300 sec, Duty cycle 1% Revision: B www.mccsemi.com 1 of 4 2013/01/01 MCC 6A05 thru 6A10 TM Micro Commercial Components Figure 1 Typical Forward Characteristics 20 0 100 Figure 2 Forward Derating Curve 6 60 40 5 20 PC BOARD 4 10 Amps 6 3 Amps 4 2 2 PC BOARD 25C 1 1 Single Phase, Half Wave 60Hz Resistive or Inductive Load .6 0 .4 50 0 75 100 125 150 175 C .2 .1 .8 .6 1.0 1.2 1.4 Average Forward Rectified Current - Amperes versus Ambient Temperature - C 1.6 Volts Instantaneous Forward Current - Amperes versus Instantaneous Forward Voltage - Volts .1 Figure 3 Typical Thermal Resistance versus Lead Length 20 15 C/W 10 5 0 .1 .2 .3 .4 .5 .6 .7 .8 .9 1.0 1.1 Inches Thermal Resistance - C/W versus Equal Lead Length To Heat Sink - Inches Revision: B www.mccsemi.com 2 of 4 2013/01/01 MCC 6A05 thru 6A10 Figure 4 Typical Reverse Characteristics Micro Commercial Components Figure 5 Maximum Non-Repetitive Forward Surge Current 100 600 60 40 500 20 400 10 300 6 Amps 4 200 100 2 TJ=100C 0 Amps 1 1 2 4 6 .6 8 10 20 40 60 80 100 Cycles .4 Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles .2 .1 .06 .04 .02 .01 TJ=25C 20 40 60 80 100 120 140 Volts Instantaneous Reverse Leakage Current - MicroAmperesversus Percent Of Rated Peak Reverse Voltage - Volts Revision: B www.mccsemi.com 3 of 4 2013/01/01 TM MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 500pcs/Reel Part Number-AP Ammo Packing: 450pcs/Ammo Box Part Number-BP Bulk: 4.8Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: B 4 of 4 2013/01/01