1.5 Amp FAST RECOVERY PLASTIC RECTIFIERS FR150 . . . 1510 Series Data Sheet Mechanical Dimensions Description JEDEC D0-15 .230 .300 1.00 Min. .104 .140 .031 typ. Features n FAST SWITCHING FOR HIGH EFFICIENCY n 1.5 AMP OPERATION @ TA = 55C, WITH NO THERMAL RUNAWAY n HIGH SURGE CAPABILITY n MEETS UL SPECIFICATION 94V-0 Units FR150 . . . 1510 Series FR150 FR151 FR152 FR154 FR156 FR158 FR1510 Peak Repetitive Reverse Voltage...VRRM 50 100 200 400 600 800 1000 Volts RMS Reverse Voltage...VR(rms) 35 70 140 280 420 560 700 Volts DC Blocking Voltage...VDC 50 100 200 400 600 800 1000 Volts Maximum Ratings Average Forward Rectified Current...IF(av) TA = 55C ............................................. 1.5 ............................................... Amps Non-Repetitive Peak Forward Surge Current...IFSM @ Rated Current & Temp ............................................. 5 0 ............................................... Amps Operating & Storage Temperature Range...TJ, TSTRG ........................................ -65 to 150 ......................................... C ............................................. 1.3 ............................................... Volts Electrical Characteristics Maximum Forward Voltage @ 1.5A...VF Maximum DC Reverse Current...IR @ Rated DC Blocking Voltage @ @ Typical Junction Capacitance...CJ (Note 1) Maximum Reverse Recovery Time...tRR Page 4-8 25C 100C ............................................. 5.0 ............................................... Amps ............................................. 100 ............................................... Amps ............................................. 1.5 ............................................... 150 150 150 150 250 500 500 pF ns Peak Forward Surge Current (A) Average Forward Current (A) Forward Current Derating Curve 1.5 1.0 .5 0 25 50 75 100 125 150 175 Ambient Temperature ( C) Non-Repetitive Peak Forward Surge Current 100 10 1 1 Typical Instantaneous Forward Characteristics 100 1 .1 .01 0 .2 .4 .6 .8 1.0 1.2 Forward Voltage (V) (+) 25 VDC (-) D.U.T 1 NonInductive 10 10 1 .1 1 10 100 Reverse Voltage (V) (-) Pulse Generator Note 2 Oscilliscope Note 1 Notes: 1. Rise Time = 7 ns Max. Impedance = 1 megohm, 22 pF 2. Rise Time = 10 ns Max. Source Impedance = 50 Ohms 50 1.6 Non-Inductive 50 100 10 Number of Cycles @ 60 Hz Typical Junction Capacitance Junction Capacitance (pF) Forward Current (A) 10 FR150 . . . 1510 Series 1.5 Amp FAST RECOVERY PLASTIC RECTIFIERS Data Sheet (+) +.5A Reverse Recovery Characteristics tRR -.25A Ratings at 25 Deg. C ambient temperature unless otherwise specified. -1.0A Single Phase Half Wave, 60 Hz Resistive or Inductive Load. 0A 1 cm Time Base Set @ 50/100ns/cm NOTES: 1. Measured @ 1 MHz and applied reverse voltage of 4.0V. 2. Thermal Resistance Junction to Ambient, Jedec Method. For Capacitive Load, Derate Current by 20%. Page 4-9