WMHP Series
AEC-Q200 (WMHP35)
TO-220 & TO-247 standard power packages
Very low thermal resistance
Non-inducvethicklmtechnology
20to100wahighpowerresistors
Singlescrewmounngtoheatsink
TailoredheatsinkWMHP-HSavailable
Suitableforhighfrequency/fastpulseuse
Heatsink Mount High Power Resistors
Resistors
06.20
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronics.com/resistors
BI Technologies IRC Welwyn
WMHP20 WMHP35 WMHP50 WMHP100 Condions
Package style TO-220 TO-247
Power rang was 20 35 50 100 Heatsink with 25°C ange temperature
Power rang was 1.5 2.5 3 3.5 Without heatsink, in free air 25°C
Liming element voltage volts 350 700 dc or ac rms
Resistance range ohms R05 – 10K
Dielectric strength volts 1800 ac rms for 60s
Working temperature range °C -65 to 150 -65 to 175
Insulaon resistance ohms >10G Between terminals and tab
Tolerances % ≤1R0: ±5 >1R0: ±1, ±5
TCR ppm/°C ≤R20: ±1000 >R20–3R0: ±300 >3R0-10R: ±100 >10R: ±50 25 to 105°C
Standard values E24 preferred
Test Performance
Load at Rated Power: 2000hrs at rated power ±∆R% 1
Short Term Overload: 2 x rated power with applied voltage not to exceed 1.5 x maximum connuous operang voltage for 5 seconds ±∆R% 0.5
Damp Heat with Load: 40 ±2°C, 90 – 95% RH, maximum working voltage 1.5 hours on, 0.5 hours o, 1000 hours ±∆R% 1
Thermal Shock: -65°C/150°C, 100cycles ±∆R% 0.3
Terminal Strength: 2.4N pull test ±∆R% 0.2
WMHP Series
TO-220 & TO-247 standard power packages
Very low thermal resistance
Non-inducve thick lm technology
20 to 100 wahigh power resistors
Single screw mounng to heatsink
Tailored heatsink WMHP-HS available
Suitable for high frequency / fast pulse use
Electrical Data
Physical Data
Performance Data
Heatsink Mount High Power Resistors
Resistors
All parts are Pb-free and comply with EU Direcve 2011/65/EU (RoHS2)
Dimensions (mm) & Weight (g)
TO-220 TO-247
A10.16 ±0.25 15.75 ±0.26
B15 ±0.3 20.7 ±0.26
C4.6 ±0.2 4.95 ±0.26
D3.85 ±0.15 3.63 ±0.1
E13.75 ±0.5 14.48 ±1.27
F4 max 2.79 ±0.76
G5.08 ±0.25 3.63 ±0.18
H0.78 ±0.08 1.52 ±0.1
J1.3 ±0.1 10.16 ±0.26
K6.4 ±0.25 5.33 ±0.26
L0.51 ±0.15 0.81 ±0.26
M2.27 ±0.25 2.41 ±0.26
Wt 2.0 nom 3.7 nom TO-220 TO-247
BI Technologies IRC Welwyn
09.17
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronics.com/resistors
All parts are Pb-free and comply with EU Direcve 2011/65/EU amended by (EU) 2015/863 (RoHS3)All parts are Pb-free and comply with EU Direcve 2011/65/EU amended by (EU) 2015/863 (RoHS3)
09.20
AEC-Q200 (WMHP20 & WMHP35)
WMHP Series
Heatsink Mount High Power Resistors
06.20
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronics.com/resistors
BI Technologies IRC Welwyn
WMHP Series
Heatsink Mount High Power Resistors
Resistors
07.18
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronics.com/resistors
BI Technologies IRC Welwyn
www.ttelectronicsresistors.com
WMHP
Series
Heatsink
HeatsinkHeatsink
Heatsink
Mount High Power Resistors
Mount High Power ResistorsMount High Power Resistors
Mount High Power Resistors
Temperature Derating
Pulse Performance
Single Pulse (P
mean
<< P
r
) Condition
Typical High Frequency Performance
Ordering Procedure
Example: WMHP35-10KJ (WMHP35 at 10 kilohms ±5%, Pb-free)
   
 
 


 


 


 


Pulse performance for durations ≥1s is dependent on mounting conditions. The short term
overload power limit is 2 x power rating for 5s.
Typical high frequency characteristics for WMHP35-220R. Self resonant frequency is 1GHz.
TO
-
220
TO
-
2
47
www.ttelectronicsresistors.com
WMHP
Series
Heatsink
HeatsinkHeatsink
Heatsink
Mount High Power Resistors
Mount High Power ResistorsMount High Power Resistors
Mount High Power Resistors
Temperature Derating
Pulse Performance
Single Pulse (P
mean
<< P
r
) Condition
Typical High Frequency Performance
Ordering Procedure
Example: WMHP35-10KJ (WMHP35 at 10 kilohms ±5%, Pb-free)
   
 
 


 


 


 


Pulse performance for durations ≥1s is dependent on mounting conditions. The short term
overload power limit is 2 x power rating for 5s.
Typical high frequency characteristics for WMHP35-220R. Self resonant frequency is 1GHz.
TO
-
220
TO
-
2
47
WMHP Series
Heatsink Mount High Power Resistors
Resistors
10
100
1000
0.1 110 100 1000 10000 100000
Peak Power (W)
Pulse Duration (ms)
WMHP100
WMHP35
WMHP50
WMHP20
The resistor should be mounted to a heatsink using
a suitable thermal interface material. The maximum
ghtening torque for the M3 mounng screw is 0.9Nm.
A tailored heatsink is available which accommodates both
TO-220 and TO-247 package styles. This is WMHP-HS and
product data is available at
hp://www.electronics.com/sites/default/les/resistors-
datasheets/WMHP-HS.pdf
Mounng
BI Technologies IRC Welwyn
09.17
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronics.com/resistors
WMHP Series
Heatsink Mount High Power Resistors
Resistors
09.19
General Note
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronics.com/resistors
BI Technologies IRC Welwyn
www.electronicsresistors.com
WMHP
Series
Heatsink
HeatsinkHeatsink
Heatsink
Mount High Power Resistors
Mount High Power ResistorsMount High Power Resistors
Mount High Power Resistors
Temperature Derating
Pulse Performance
Single Pulse (P
mean
<< P
r
) Condition
Typical High Frequency Performance
Pulse performance for durations ≥1s is dependent on mounting conditions. The short term
overload power limit is 2 x power rating for 5s.
Typical high frequency characteristics for WMHP35-220R. Self resonant frequency is 1GHz.
TO
-
220
TO
-
2
47
www.electronicsresistors.com
ount High Power Resistors
ount High Power Resistorsount High Power Resistors
ount High Power Resistors
Temperature Derating
Pulse Performance
Single Pulse (P
mean
<< P
r
) Condion
Typical High Frequency Performance
Procedure
(WMHP35 at 10 kilohms ±5%, Pb-free)
ons ≥1s is dependent on mounng condions. The short term
wer rang for 5s.
Typical high frequency characteriscs for WMHP35-220R. Self resonant frequency is 1GHz.
TO
-
220
TO
-
2
47
WMHP Series
Heatsink Mount High Power Resistors
Resistors
10
100
1000
0.1 1 10 100 1000 10000 100000
Peak Power (W)
Pulse Duration (ms)
WMHP100
WMHP35
WMHP50
WMHP20
The resistor should be mounted to a heatsink using
a suitable thermal interface material. The maximum
A tailored heatsink is available which accommodates both
TO-220 and TO-247 package styles. This is WMHP-HS and
product data is available at
h�ps://www.TTelectronics.com/TTElectronics/media/
ProductFiles/Resistors/Datasheets/WMHP-HS.pdf
BI Technologies IRC Welwyn
09.17
General Note
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronics.com/resistors
09.20