CPC1225N 400V Normally-Open Single-Pole 4-Pin SOP OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Rating 400 120 30 Units VP mArms / mADC Features * 0.4mm Distance Through Insulation (Supplementary Isolation Requirement of EN60950) * 1500Vrms Input/Output Isolation * Small 4-Pin SOP Package * Low Drive Power Requirements * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Tape & Reel Version Available * Flammability Rating UL 94 V-0 Description The CPC1225N is a miniature normally-open, single-pole, (1-Form-A) solid state relay that employs IXYS Integrated Circuits Division's patented, optically isolated OptoMOS architecture to provide 1500Vrms of input-to-output isolation. A highly efficient infrared LED controls the optically coupled output. The device also complies with the Supplementary Isolation requirements of EN/IEC 60950-1. The CPC1225N uses IXYS Integrated Circuits Division's state of the art double molded vertical construction to produce one of the world's smallest 4-pin relays. It offers board space savings approaching 20% over the competitor's larger 4-pin SOP relay. Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1172007 * EN/IEC 60950-1 Certified Component: TUV Certificate B 13 12 82667 003 Ordering Information Part # CPC1225N CPC1225NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Pin Configuration + Control - Control 1 4 3 2 Load Load Switching Characteristics of Normally-Open Devices Form-A IF 90% 10% ILOAD ton DS-CPC1225N-R07 www.ixysic.com toff 1 INTEGRATED CIRCUITS DIVISION CPC1225N Absolute Maximum Ratings @ 25C Parameter Blocking Voltage (Peak) Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 2 Ratings 400 5 50 1 70 400 1500 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms C C Typical values are characteristic of the device at +25C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements. Derate linearly 1.33 mW / C Derate linearly 3.33 mW / C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate 3 Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output 1 2 3 2 Conditions Symbol Min Typ Max Units t=10ms IL=120mA VL=400VP IL ILPK RON ILEAK - 20 - 120 350 30 1 mArms / mADC mAP A IF=0mA, VL=50V, f=1MHz ton toff COUT - 1.25 0.35 9 2 1 - IL=120mA IF=5mA VR=5V IF IF VF IR 0.3 0.9 - 0.6 0.55 1.2 - 2 1.5 10 mA mA V A - pF IF=5mA, VL=10V VIO=0V, f=1MHz CIO Load current derates linearly from 120mA @ 25oC to 80mA @ 85oC. Measurement taken within 1 second of on-time. For applications requiring high temperature operation (greater than 60C) a minimum LED drive current of 4mA is recomended. www.ixysic.com 1 ms pF R07 INTEGRATED CIRCUITS DIVISION CPC1225N PERFORMANCE DATA* Typical LED Forward Voltage Drop (N=50, IF=5mA) 25 Device Count (N) Device Count (N) 30 25 20 15 10 5 25 20 15 10 5 1.21 1.22 1.23 1.24 15 10 0 0.80 1.25 0.95 1.10 1.25 1.40 1.55 1.70 0.29 Typical IF For Switch Dropout (N=50, IL=120mA) Typical IF For Switch Operation (N=50, IL=120mA) 20 20 25 10 5 Device Count (N) 30 Device Count (N) 25 15 15 10 5 0.50 0.55 0.60 0.65 0.70 0.41 20 15 10 5 0 0 0.33 0.35 0.37 0.39 Turn-Off Time (ms) Typical On-Resistance Distribution (N=50, IF=2mA, IL=120mA) 25 0.45 0.31 Turn-On Time (ms) LED Forward Voltage Drop (V) Device Count (N) 20 5 0 0 Typical Turn-Off Time (N=50, IF=5mA, IL=120mA) 30 Device Count (N) 35 Typical Turn-On Time (N=50, IF=5mA, IL=120mA) 0 0.45 0.75 0.50 LED Current (mA) 0.55 0.60 0.65 0.70 LED Current (mA) 17.5 0.75 18.0 18.5 19.0 19.5 20.0 On-Resistance (:) 20.5 Typical Blocking Voltage Distribution (N=50) Device Count (N) 20 15 10 5 0 405 435 Typical Turn-Off Time vs. LED Forward Current (IL=120mA) 8 1.6 0.40 1.4 IF=50mA 1.3 IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.1 -40 -20 0 20 40 60 80 Temperature (C) 100 120 Turn-Off Time (ms) 7 1.5 Turn-On Time (ms) LED Forward Voltage Drop (V) 415 420 425 430 Blocking Voltage (VP) Typical Turn-On Time vs. LED Forward Current (IL=120mA) Typical LED Forward Voltage Drop vs. Temperature 1.0 410 6 5 4 3 2 0.30 0.25 0.20 0.15 1 0 0.35 0 5 10 15 20 LED Forward Current (mA) 25 0.10 0 5 10 15 20 LED Forward Current (mA) 25 *Unless otherwise noted, data presented in these graphs is typical of device operation at 25C. For guaranteed parameters not indicated in the written specifications, please contact our application department. R07 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC1225N PERFORMANCE DATA* Typical Turn-Off Time vs. Temperature (IL=80mA) IF=2mA 1.4 IF=5mA 1.2 1.0 0.5 On-Resistance (:) 0.6 1.6 IF=5mA 0.4 0.3 IF=2mA 0.2 Typical On-Resistance vs. Temperature (IF=10mA, IL=80mA) 35 0.7 Turn-Off Time (ms) Turn-On Time (ms) 1.8 Typical Turn-On Time vs. Temperature (IL=80mA) 30 25 20 15 0.1 0.8 -40 -20 0 20 40 60 Temperature (C) 80 0.0 100 Typical IF For Switch Operation vs. Temperature (IL=80mA) 0.85 0.80 0.80 0 20 40 60 Temperature (C) 80 10 -40 100 0.70 0.65 0.60 0.55 0.50 -20 0 20 40 60 Temperature (C) 80 0.70 0.65 0.60 0.55 0.50 0.40 -40 100 Typical Load Current vs. Load Voltage (IF=2mA) 150 Blocking Voltage (VP) 50 0 -50 -100 -150 -3 -2 -1 0 1 2 3 -20 100 20 40 60 Temperature (C) 70 100 -40 0.025 440 430 420 410 -20 0 20 40 60 Temperature (C) 0 20 40 60 Temperature (C) 80 100 Typical Leakage vs. Temperature Measured Across Pins 3&4 (VL=400V) 0.020 0.015 0.010 30 20 10 0 10 100 Load Voltage (V) 80 100 0.000 -40 -20 0 20 40 60 Temperature (C) 80 100 Energy Rating Curve 40 1 -20 0.005 400 Output Capacitance vs. Load Voltage (IF=0mA, f=1MHz) 0.1 80 80 0.030 Load Current (A) Output Capacitance (pF) 0 IF=2mA 90 450 Load Voltage (V) 50 100 110 460 390 -40 80 120 Typical Blocking Voltage vs. Temperature 100 20 40 60 Temperature (C) 130 Leakage (PA) 0.40 -40 0 Typical Load Current vs. Temperature 0.45 0.45 -20 Typical IF For Switch Dropout vs. Temperature (IL=80mA) Load Current (mA) LED Current (mA) LED Current (mA) -20 0.75 0.75 Load Current (mA) -40 1000 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms 1s 10s 100s Time *Unless otherwise noted, data presented in these graphs is typical of device operation at 25C. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R07 INTEGRATED CIRCUITS DIVISION CPC1225N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Classification CPC1225N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Soldering Profile Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the body temperature of this device may be (TC - 5)C or greater. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other processes, the guidelines of J-STD-020 must be observed. Device Classification Temperature (Tc) Dwell Time (tp) Max Reflow Cycles CPC1225N 260C 30 seconds 3 Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based. R07 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION CPC1225N MECHANICAL DIMENSIONS CPC1225N 4.089 0.025 (0.161 0.001) Recommended PCB Land Pattern 0.203 Typ (0.008 Typ) 0.55 (0.022) 6.096 0.102 (0.240 0.004) 3.810 0.025 (0.150 0.001) 0.559 0.127 (0.022 0.005) 5.50 (0.217) 0.910 0.025 (0.036 0.001) Pin 1 2.54 Typ (0.100 Typ) 1.45 (0.057) 2.030 0.025 (0.080 0.001) 2.54 (0.10) Package standoff: 0.064 0.040 (0.0025 0.0015) 0.481 (0.019) 0-0.1 (0-0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) CPC1225NTR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 (0.472) B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P1=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossed Carrier Embossment NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC1225N-R07 (c)Copyright 2018, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 1/30/2018 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: IXYS: CPC1225N CPC1225NTR