OS-CON Line-up Image of case size Products list Packing specifications SMD type Packing specifications Radial lead type Recommended soldering condition Fundamental structure Characteristics Reliability Technical data Series system diagram Selection guide Guidelines and precautions Radial lead type SEPC Surface mount type SVPF SVPE SVPS SVPD SVPC SVPB SVPA Items Condition Specifications (V) - 2.5 4.0 6.3 10 16 Surge voltage (V) Room temperature 3.3 5.2 8.2 12 18 Category temperature range () Capacitance tolerance -55 to 105 - 120Hz/20 M : 20 120Hz/20 Please see the attached characteristics list Rated voltage applied, after 2 minutes Please see the attached characteristics list 100kHz to 300kHz/20 Please see the attached characteristics list () Dissipation Factor (DF) Characteristics of impedance ratio at high temp. and low temp. 105 Z/Z20 0.75 to 1.25 C/C Within 20% of the initial value DF Within 1.5 times of the initial limit ESR Within 1.5 times of the initial limit 105, 5,000h, Rated voltage applied Endurance 60, 90 to 95%RH, 1,000h, No-applied voltage SVP SEPF SEPC SEQP SEP Flow method (2605 X 10s) Resistance to soldering heat2 LC Within the initial limit C/C Within 20% of the initial value DF Within 1.5 times of the initial limit ESR Within 1.5 times of the initial limit LC Within the initial limit (after voltage processing) C/C Within 5% of the initial value DF Within the initial limit ESR Within the initial limit LC Within the initial limit (after voltage processing) 1 In case of some problems for measured values, measure after applying rated voltage for 120 minutes at 105. 2 Please refer to page 25 for flow soldering conditions. Marking and dimensions Catalog Deletion and EOL series E12, E13, F13 Size POSCAP Line-up 003 Guidelines and precautions 2700 2.5 SEPC Series SEPC d (unit : mm) D Polarity marking Cathode Case No. F Radial lead type SXE 0.75 to 1.25 -55 Z/Z20 Based the value at 100kHz, 20 Damp heat(Steady state) SVQP RoHS directive/Halogen-free compliant Super Low ESR5m 24m Large capacitance2,700F Endurance 105 5,000h Rated voltage Equivalent series resistance (ESR) SVPG Series Specifications Leakage current1 SXV Update has (B9no size marking ) 15min. Rated capacitance L Rated voltage 4min. 19min. B9, C55, C6, C7, C9, E7, E9 Size d F D Selection guide 15min. Technical data L 4min. 19min. B9,C55,C6,C7,C9,E7,E9 size flat rubber is used. Size list F Surface mount type Catalog Deletion and EOL models 55 RV 100 150 180 220 270 330 390 470 560 680 820 1,000 1,500 2,700 2.5 RV : Rated voltage 4.0 6.3 10 16 E7 C6C9 E7 E9, E12 E7 E9, E12 B9 C55 B9, C9 C6 B9 C7,C9, E9, E13 B9, C6,C9, E9 C9, E9, E13 C9, E9 F13 E13 F13 C9,E7, E9, E13 E7 E9 F13 F13 F13 Size code D 0.5 L max B9 5.0 9.0 C55 6.3 5.5 C6 6.3 6.0 C7 6.3 7.0 C9 6.3 9.0 E7 8.0 7.0 E9 8.0 9.0 E12 8.0 12.0 E13 8.0 13.0 F13 10.0 13.0 F d 0.05 2.00.5 0.6 2.50.5 0.45 2.50.5 0.45 3 2.50.5 0.6 2.50.5 0.6 3.50.5 0.6 4 3.50.5 0.6 3.50.5 0.6 3.50.5 0.6 5.00.5 0.6 3 2SEPC390M, 2SEPC560M : 0.50.05 4 16SEPC150MD,10SEPC270MD : 0.450.05 OS-CON Line-up C55 Rated voltage (V) C7 7 4180 10 500 2SEPC330MZ 2.5 330 7 4180 10 500 2SEPC470MZ 2.5 470 7 4180 10 500 2SEPC560MZ 2.5 560 7 4180 10 500 6SEPC220M 6.3 220 18 2980 12 280 100 24 2490 10 320 16 2SEPC390M 2.5 390 10 3900 12 500 2SEPC560M 2.5 560 10 3900 12 500 6SEPC470ME 6.3 470 20 2970 10 592 16 100 10 4680 10 500 6SEPC470MW 6.3 470 7 5600 10 592 6SEPC560MW 6.3 560 7 5600 10 705 E12 E13 Packing specifications Radial lead type Recommended soldering condition Fundamental structure Characteristics Reliability SXV SVPG SVPF SVPE SVPS SVPD SVPC SVPB SVPA 4SEPC560MW 4.0 560 7 5600 10 500 2SEPC330MW 2.5 330 7 5600 10 500 SVP 2SEPC560MW 2.5 560 7 5600 10 500 2.5 820 7 5600 10 500 16SEPC150MD 16 150 22 3220 12 500 16SEPC220MD 16 220 13 4150 10 500 10SEPC270MD 10 270 22 3220 12 500 820 8 5300 10 500 2.5 6SEPC1000MD 6.3 1000 18 3530 10 1260 16SEPC180MX 16 180 10 5000 10 576 16SEPC270MX 16 270 10 5000 10 864 6SEPC470MX 6.3 470 8 5700 10 592 6SEPC560MX 6.3 560 7 6100 10 705 4SEPC560MX 4.0 560 7 6100 10 500 2SEPC560MX 2.5 560 8 4700 10 280 2SEPC820MX 2.5 820 7 6100 10 500 2SEPC820MY 2.5 820 5 7200 10 500 2SEPC1000MX 2.5 1000 7 6100 10 500 16SEPC180M 16 180 16 4360 10 576 16SEPC270M 16 270 11 5000 10 864 6SEPC470M 6.3 470 8 5700 10 592 4SEPC560M 4.0 560 7 6100 10 500 4SEPC680M 4.0 680 7 6100 10 544 2.5 820 7 6100 10 500 470 10 6100 10 1504 2R5SEPC820M 16SEPC470M F13 Products list Packing specifications SMD type SVQP 2SEPC820MD E9 Leakage current (A)(max) After 2 minutes 100 2SEPC820MW E7 DF (% max) 2.5 16SEPC100MW C9 Rated ESR(m) (max) ripple current 100kHz to 300kHz/20 100kHz (mArms) at 105 2SEPC100MZ 16SEPC100M C6 Rated capacitance (F) Technical data B9 Part number Image of case size 16 6SEPC680M 6.3 680 7 6640 10 857 6SEPC1500M 6.3 1500 10 5560 10 1890 4SEPC820M 4.0 820 7 6640 10 656 2SEPC2700M 2.5 2700 10 5560 10 1350 SXE Radial lead type Size code Series system diagram Surface mount type SEPC series characteristics list Selection guide Guidelines and precautions SEPF SEPC SEQP SEP Catalog Deletion and EOL series POSCAP Line-up Guidelines and precautions Selection guide Technical data Surface mount type Frequency coefficient for ripple current Frequency 120Hz f 1kHz 1kHz f 10kHz 10kHz f 100kHz 100kHz f 500kHz Coefficient 0.05 0.3 0.7 1 Red letters New models Catalog Deletion and EOL models 56