www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-30
© 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
Adapters and
Transitions
E
713-100
Metal Straight, 45°, and 90° Connector Adapters
for use with Transition Fittings
How To Order
Product
Series
Adapter Material
100 = Aluminum
101 = Brass
110 = Stainless Steel
Finish
(Table II)
Shell Size
(Table III)
1 = Style 1
713 A S 100 M 16 1 32 -4
Connector
Designator
(Table I,
Intro)
Angular Function
S = Straight
K = 45°
L = 90°
Length
S Only - In 1/2
Inch (12.7 mm)
Increments
(e.g. 4 = 2 Inches)
See pg. A-32 for
minimum lengths
Circular connector adapter, non-self-locking with environmental O-Ring for use with
transition ttings
SYM K
45° SYM S
Straight
O-Ring
A Thread
(Table I, Intro)
Ø J
Typ
Length
D
F
G
E
Material and Finish
• Adapters, Coupling Nuts and Elbows - Table II (See P/N development)
• O-Ring - Silicone/N.A.
Notes
• Interface O-Ring not applicable to connector designator A.
SYM L
90°
Dash No.
(Table IV)
ØC or D
(Table I, Intro)
H Thread
45°
www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-31
© 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
Adapters and
Transitions
E
Table III: Shell Size/Dimensions
Shell Size Max
Dash No.
Ref**
D
Max
E
Max
F
Max
G
Max
A, D, E,
F, J,K, L,S H
08 09 08 .531 (13.5) .781 (19.8) .437 (11.1) .625 (15.9)
10 11 12 .625 (15.9) .906 (23.0) .500 (12.7) .656 (16.7)
12 13 16 .688 (17.5) .906 (23.0) .500 (12.7) .719 (18.3)
14 15 20 .719 (18.3) 1.000 (25.4) .562 (14.3) .781 (19.8)
16 17 24 .906 (23.0) 1.062 (27.0) .656 (16.7) .844 (21.4)
18 19 24 .968 (24.6) 1.062 (27.0) .656 (16.7) .844 (21.4)
20 21 32 1.031 (26.2) 1.093 (27.8) .719 (18.3) .844 (21.4)
22 23 32 1.156 (29.4) 1.156 (29.4) .812 (20.6) .906 (23.0)
28 25 40 1.219 (31.0) 1.281 (32.5) .812 (20.6) .906 (23.0)
24 - 40 1.281 (32.5) 1.531 (38.9) 1.093 (27.8) .906 (23.0)
32 - 48 1.593 (40.5) 1.719 (43.7) 1.093 (27.8) 1.219 (31.0)
36 - 64 1.718 (43.6) 1.906 (48.4) 1.156 (29.4) 1.281 (32.5)
** Dimensions D-E-F-G apply to connector Shell Size and Conduit Dash No. combinations listed.
When larger Conduit Dash Numbers are selected, consult factory for dimensions.
Table IV: Conduit Size
Dash No.
Conduit Size
(Ref) H Thread
Class 2A
Ø J
± .015 (.4)
06 06 06 - 7/16 - 28 UNEF .193 (4.9)
08 - - 08 1/2 - 20 UNF .255 (6.5)
09 09 09 09 9/16 - 24 UNEF .286 (7.3)
10 - 10 - 9/16 - 24 UNEF .317 (8.1)
12 12 12 12 5/8 - 24 UNEF .380 (9.7)
14 14 14 - 11/16 - 24 UNEF .442 (11.2)
16 16 16 16 3/4 - 20 UNEF .505 (12.8)
20 20 20 20 7/8 - 20 UNEF .630 (16.0)
24 24 24 24 1 - 20 UNEF .755 (19.2)
28 28 28 - 1 3/16 - 18 UNEF .880 (22.4)
32 32 32 32 1 5/16 - 18 UNEF 1.005 (25.5)
40 40 40 40 1 1/2 - 18 UNEF 1.255 (31.9)
48 48 48 48 1 3/4 - 18 UNS 1.505 (38.2)
56 - 56 56 2 - 18 UNS 1.755 (44.6)
64 - 64 64 2 1/4 - 16 UN 2.005 (50.9)
80 - - 80 2 3/4 - 16 UN 2.505 (63.6)
*** Consult factory for adapters using 3.000 inch (76.2) conduit
Table II: Finish
Sym Finish
BOlive Drab over Cadmium Plate
JGold Iridite over Cadmium Plate over Nickel
MElectroless Nickel
NOlive Drab over Cadmium Plate over Nickel
NC Zinc Cobalt, Olive Drab
NF Olive Drab over Cadmium Plate over Electroless Nickel
(1000 Hour salt Spray)
TBright Dip Cadmium over Nickel
Z1 Passivate
713-100
Metal Straight, 45°, and 90° Connector Adapters
for use with Transition Fittings
