www.clare.com
DS-PAA140-R08 1
PAA140
Dual Single-Pole, Normally Open
OptoMOS® Relays
RoHS
2002/95/EC e3
Pb
Part # Description
PAA140 8-Lead DIP (50/tube)
PAA140P 8-Lead Flatpack (50/tube)
PAA140PTR 8-PLead Flatpack (1000/Reel)
PAA140S 8-Lead Surface Mount (50/tube)
PAA140STR 8-Lead Surface Mount (1000/Reel)
Parameter Rating Units
Load Voltage 400 V
Load Current 250 mA
Max RON 8Ω
Applications
Features
Description
Ordering Information
Pin Configuration
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hook Switch
• Dial Pulsing
• Ground Start
• Ringing Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
• 3750Vrms Input/Output Isolation
• Small 8-Pin Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Tape & Reel Versions Available
The PAA140 is a 400V, 250mA, 8Ω, dual normally
open (1-Form-A) relay. This high performance
leader provides a high peak load voltage handling
capability combined with a very low on-resistance for
specialized applications.
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 004
Switching Characteristics
of Normally Open Devices
1
2
3
4
+ Control - Switch #1
– Control - Switch #1
+ Control - Switch #2
– Control - Switch #2
8
7
6
5
Load - Switch #1
Load - Switch #1
Load - Switch #2
Load - Switch #2
Form-A
IF
ILOAD
10%
90%
ton toff
www.clare.com
2R08
PAA140
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Absolute Maximum Ratings @ 25ºC
Parameter Ratings Units
Blocking Voltage 400 VP
Reverse Input Voltage 5 V
Input Control Current 50 mA
Peak (10ms) 1 A
Input Power Dissipation 1150 mW
Total Power Dissipation 2800 mW
Isolation Voltage, Input to Output 3750 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 1.33 mW / ºC
2 Derate linearly 6.67 mW / ºC
Electrical Characteristics @ 25ºC
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current
Continuous * - IL- - 250 mA
Peak t=10ms ILPK - - 500
On-Resistance IL=250mA RON -68Ω
Off-State Leakage Current VL=400VPILEAK --1µA
Switching Speeds
Turn-On IF=5mA, VL=10V ton --3
ms
Turn-Off toff --1
Input Characteristics
Input Control Current IL=250mA IF--5mA
Input Dropout Current - IF0.4 0.7 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Current VR=5V IR- - 10 µA
Common Characteristics
Capacitance Input to Output - CI/O -3-pF
*NOTE: If both poles operate simultaneously, then load current must be derated so that the package power dissipation value is not exceeded.
PAA140
www.clare.com 3
R08
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
0.65 1.17 1.69 1.950.39 0.91 1.43
Turn-On (ms)
Device Count (N)
25
20
15
10
5
0
Typical Turn-On Time
(N=50, IF=5mA, IL=250mADC, TA=25ºC)
0.0780.0540.030 0.066 0.0900.0420.018
Turn-Off (ms)
Device Count (N)
25
20
15
10
5
0
Typical Turn-Off Time
(N=50, IF=5mA, IL=250mADC, TA=25ºC)
35
30
25
20
15
10
5
0
5.38 6.08 6.785.03 5.73 6.43 7.13
On-Resistance (Ω)
Device Count (N)
Typical On-Resistance Distribution
(N=50, IF=5mA, IL=250mADC, TA=25ºC)
2.1 3.3 4.51.5 2.7 3.9 5.1
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
Typical IF for Switch Operation
(N=50, IL=250mADC, TA=25ºC)
25
20
15
10
5
0
1.5 2.7 3.90.9 2.1 3.3 4.5
LED Current (mA)
Device Count (N)
Typical IF for Switch Dropout
(N=50, IL=250mADC, TA=25ºC)
35
30
25
20
15
10
5
0
430 454 478 502442 466 490
Device Count (N)
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
Blocking Voltage (VP)
35
30
25
20
15
10
5
0
1.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
Typical LED Forward Voltage Drop
(N=50, IF=5mA, TA=25ºC)
LED Forward Current (mA)
Turn-On (ms)
05 1015202530354045
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
50
Typical Turn-On
vs. LED Forward Current
(IL=250mADC)
LED Forward Current (mA)
Turn-Off (ms)
05 1015202530354045
0.050
0.045
0.040
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0
50
Typical Turn-Off
vs. LED Forward Current
(IL=250mADC)
LED Forward Voltage Drop (V)
1.8
1.6
1.4
1.2
1.0
0.8
-40 -20 0 20 40 60 80 120100
IF=50mA
IF=30mA
IF=20mA
IF=10mA
IF=5mA
Typical LED Forward Voltage Drop
vs. Temperature
Temperature (ºC)
Turn-On (ms)
-40
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
IF = 5mA
IF = 10mA
IF = 20mA
Typical Turn-On vs. Temperature
(IL=250mADC)
Temperature (ºC)
Turn-Off (ms)
-40
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0
-20 0 20 40 60 80 100
Typical Turn-Off vs. Temperature
(IF=5mA, IL=250mADC)
Temperature (ºC)
www.clare.com
4R08
PAA140
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
LED Current (mA)
-40
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
-20 0 20 40 60 80 100
Typical IF for Switch Operation
vs. Temperature
(IL=250mADC)
Temperature (ºC)
LED Current (mA)
-40
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
-20 0 20 40 60 80 100
Typical IF for Switch Dropout
vs. Temperature
(IL=250mADC)
Temperature (ºC)
On-Resistance (Ω)
-40
10
9
8
7
6
5
4
-20 0 20 40 60 80 100
Typical On-Resistance
vs. Temperature
(IF=5mA, IL=250mADC)
Temperature (ºC)
Load Voltage (V)
Load Current (mA)
250
200
150
100
50
0
-50
-100
-150
-200
-250
-2.0 -1.0 -0.5-1.5 0 1.0 1.50.5 2.0
Typical Load Current vs. Load Voltage
(IF=5mA, TA=25ºC)
Load Current (mA)
350
300
250
200
150
100
Typical Load Current
vs. Temperature
Temperature (ºC)
-40 -20 0 20 40 60 80 120100
I
F
= 20mA
I
F
= 10mA
I
F
= 5mA
Blocking Voltage (VP)
-40
485
480
475
470
465
460
455
450
445
-20 0 20 40 60 80 100
Typical Blocking Voltage
vs. Temperature
Temperature (ºC)
Leakage (μA)
-40
0.12
0.10
0.08
0.06
0.04
0.02
0-20 0 20 40 60 80 100
Typical Leakage vs. Temperature
Measured Across Pins 5&6 or 7&8
Temperature (ºC) Time
Load Current (A)
10μs
1.2
1.0
0.8
0.6
0.4
0.2
0
1ms100μs 100ms 1s
10ms 10s 100s
Energy Rating Curve
PAA140
www.clare.com 5
R08
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all
of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry
standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to
the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled
according to the limitations and information in that standard as well as to any limitations set forth in the information or
standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
PAA140 / PAA140S / PAA140P MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
PAA140 / PAA140S 250ºC for 30 seconds
PAA140P 260ºC for 30 seconds
Board Wash
Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is
acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated
products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes.
Chlorine-based or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic
energy should not be used.
RoHS
2002/95/EC e3
Pb
www.clare.com
6R08
PAA140
MECHANICAL DIMENSIONS
Dimensions
mm
(inches)
PCB Hole Pattern
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
0.457 ± 0.076
(0.018 ± 0.003)
9.652 ± 0.381
(0.380 ± 0.015)
7.239 TYP.
(0.285)
7.620 ± 0.254
(0.300 ± 0.010)
4.064 TYP
(0.160)
0.889 ± 0.102
(0.035 ± 0.004)
8-0.800 DIA.
(8-0.031 DIA.) 2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
0.254 TYP
(0.01)
Dimensions
mm
(inches)
PCB Land Pattern
2.540 ± 0.127
(0.100 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
6.350 ± 0.127
(0.250 ± 0.005)
9.525 ± 0.254
(0.375 ± 0.010)
0.457 ± 0.076
(0.018 ± 0.003)
0.813 ± 0.120
(0.032 ± 0.004)
4.445 ± 0.127
(0.175 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.127
(0.025 ± 0.005)
0.254 ± 0.127
(0.010 ± 0.0005)
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
3.302 ± 0.051
(0.130 ± 0.002)
Dimensions
mm
(inches)
PCB Land Pattern
9.398 ± 0.127
(0.370 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
0 MIN / 0.102 MAX
(0 MIN / 0.004 MAX)
2.286 MAX.
(0.090 MAX.)
0.203 ± 0.013
(0.008 ± 0.0005)
0.635 ± 0.127
(0.025 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
0.457 ± 0.076
(0.018 ± 0.003)
2.159 ± 0.025
(0.085 ± 0.001)
2.54
(0.10)
8.70
(0.3425)
1.55
(0.0610)
0.65
(0.0255)
0.864 ± 0.120
(0.034 ± 0.004)
PAA140
PAA140S
PAA140P
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-PAA140-R08
©Copyright 2010, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
7/30/2010
For additional information please visit our website at: www.clare.com
7
PAA140
MECHANICAL DIMENSIONS
Dimensions
mm
(inches)
User Direction of Feed
NOTES:
1. Dimensions carry tolerances of EIA Standard 481-2
2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
Embossment
Embossed Carrier
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
330.2 DIA.
(13.00 DIA.)
K1=4.20
(0.165)
0
K =4.90
(0.193)
P=12.00
(0.472)
W=16.00
(0.63)
Bo=10.30
(0.406)
Ao=10.30
(0.406)
Dimensions
mm
(inches)
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
Embossment
Embossed Carrier
To p C over
Tape Thickness
0.102 MAX.
(0.004 MAX.)
330.2 DIA.
(13.00 DIA.)
User Direction of Feed
P = 12.00
(0.472)
W = 16.00
(0.63)
Bo = 10.30
(0.406)
Ao = 10.30
(0.406)
K1= 2.00
(0.079)
K0= 2.70
(0.106)
PAA140S Tape & Reel
PAA140P Tape & Reel
