MATERIAL SAFETY DATA SHEET CHEMTRONICS CW8100 CIRCUITWORKS NO CLEAN FLUX DISPENSING PEN 1. IDENTIFICATION OF SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING COMMERCIAL PRODUCT NAME: CODE NO. CIRCUITWORKS NO CLEAN FLUX DISPENSING PEN CW8100 MANUFACTURER/SUPPLIER: CHEMTRONICS, INC. 8125 Cobb Center Drive Kennesaw, Georgia 30152 USA Phone Number: 1-770-424-4888 Fax Number: 1-770-423-0748 EMERGENCY: 1-703-527-3887 2. COMPOSITION/INFORMATION ON INGREDIENTS HAZARDOUS INGREDIENTS CAS No. CLASSIFICATION R PHRASES CONCENTRATION Isopropanol 67-63-0 F R11 95.0-99.9 3. HAZARDS IDENTIFICATION Main Hazards Highly Flammable. Health Effects - Eyes Liquid may cause slight transient irritation. Health Effects - Skin Repeated or prolonged contact may produce defatting of the skin leading to irritation and dermatitis. Health Effects - Ingestion Swallowing may have the following effects: light headedness, nausea, drowsiness Health Effects - Inhalation Exposure to vapour at high concentrations may have the following effects: light headedness, drowsiness, 4. FIRST-AID MEASURES First Aid - Eyes Immediately flood the eye with plenty of water, preferably warm, for at least 20 minutes, holding the eye open. First Aid - Skin Wash skin with soap and water. Apply a reconditioning skin cream. First Aid - Ingestion Do not induce vomiting. Obtain medical attention. First Aid - Inhalation 5. FIRE-FIGHTING MEASURES Extinguishing Media Remove from exposure. Unsuitable Extinguishing Media: Do not use waterjet. Protective Equipment for Fire-Fighting: 6. ACCIDENTAL RELEASE MEASURES Personal Precautions: Wear self contained breathing apparatus. Use water spray, foam, dry chemical or carbon dioxide. Wear appropriate protective clothing. Ventilate the area. Environmental Precautions: Try to prevent the material from entering drains or water courses. Spillages: Contain and absorb using earth, sand or other inert material. MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET CHEMTRONICS CW8100 CIRCUITWORKS NO CLEAN FLUX DISPENSING PEN 7. HANDLING AND STORAGE Handling: Avoid inhaling vapour. Avoid contact with eyes, skin and clothing. Adequate ventilation should be provided if there is risk of vapour build-up. To avoid the build-up of electrostatic charges, earth all containers and piping when transferring from one vessel to another. MATERIAL SAFETY DATA SHEET NO. 0090E PAGE 1 OF 4 Storage: Storage and transfer equipment should be adequately earthed and bonded to prevent the accumulation of static charges. Store away from sources of heat or ignition. Store in original containers. 8. EXPOSURE CONTROLS /PERSONAL PROTECTION Occupational Exposure Standards: 1. ISOPROPYL ALCOHOL An exposure limit of 400ppm 8h TWA is recommended. Engineering Control Measures Respiratory Protection Exposure to this material may be controlled in a number of ways. The measures appropriate for a particular worksite depend on how the material is used and on the potential for exposure. Administrative controls and personal protective equipment may also be required. Respiratory protection if there is a risk of exposure to high vapour concentrations. Hand Protection: Use a good quality barrier cream. Eye Protection: Chemical goggles if there is a risk of eye contact. Body Protection: Normal work wear. Protection During Application: 9. PHYSICAL AND CHEMICAL PROPERTIES Physical State: During application, adequate ventilation must be provided. Colour: Colourless Odour: Characteristic Flashpoint (PMCC) (C): 12 Explosion Limits (%): Not determined Solubility in water (kg/m3): Soluble Flammability Classified as "Highly Flammable" in the EEC Auto-flammability Not determined Vapour Density (Air=1): Heavier than air. Evaporation Rate > 1 (referenced as n-butyl acetate = 1) Liquid MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET CHEMTRONICS CW8100 CIRCUITWORKS NO CLEAN FLUX DISPENSING PEN 10. STABILITY AND REACTIVITY Stability: No unusual reactivity. Conditions to Avoid: Static discharge. Materials to avoid: Strong oxidizing agents. Hazardous Decomposition Products: 11. TOXICOLOGICAL INFORMATION None known Acute Toxicity 12. ECOLOGICAL INFORMATION Low order of acute toxicity. Mobility: If released to air it will disperse rapidly. MATERIAL SAFETY DATA SHEET NO. 0090E PAGE 2 OF 4 13. DISPOSAL CONSIDERATIONS Product Disposal Dispose of in accordance with all applicable local and national regulations. Container Disposal: Dispose of containers with care. 14. TRANSPORTATION INFORMATION UN Number: UN Proper Shipping Name: UN Class UN Packaging Group ADR/RID Substance Identification Number ADR/RID - Description ADR/RID - Class ADR/RID - Item No. ADR/RID - Hazard Identification Number IMDG - Proper Shipping Name IMDG - Packaging Group IMDG - Class IMDG - Marine Pollutant IMDG - Ems Number IMDG - Page Number IATA - Proper Shipping Name IATA - Packaging Group IATA - Class Tremcard No. TEC(R) 1993 Flammable liquid, n.o.s. (Isopropanol) 3 II 1993 Inflammable liquids having a flash-point below 21C, not toxic and not corrosive. 3 3b 33 Flammable liquid, n.o.s. (Isopropanol) II 3.2 No. 3-07 3230 Flammable liquid, n.o.s. (Isopropanol) II 3 527 MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET CHEMTRONICS CW8100 CIRCUITWORKS NO CLEAN FLUX DISPENSING PEN 15. REGULATORY INFORMATION Labeling Information F Highly Flammable R Phrases: Highly flammable. S Phrases: Keep away from sources of ignition - No smoking. Do not breathe gas/fumes/vapour/spray. Keep container tightly closed, in a cool well ventilated place. Take precautionary measures against static discharges. Keep out of reach of children. 16. OTHER INFORMATION: PRODUCT INFORMATION: 1-770-424-4888 Product Use: MSDS first issued: MSDS data revised: EC Legislation For industrial use only. Cleaning solvent. 4/3/98 4/3/98 EC Directive 91/155/EEC defining the laying down and detailed arrangements for the system of specific information relating to dangerous preparations. MATERIAL SAFETY DATA SHEET NO. 0090E PAGE 3 OF 4 EC Directive 88/379/EEC relating to the classification, packaging and labelling of dangerous preparations. To the best of our knowledge, the information contained herein is accurate. However, all materials may present unknown hazards and should be used with caution. In particular, improper use of our products and their inappropriate combination with other products and substances may produce harmful results which cannot be anticipated. Final determination of the suitability of any material is the sole responsibility of the user. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that may exist. MATERIAL SAFETY DATA SHEET NO. 0090E PAGE 4 OF 4