66260 6 PIN GULL WING PROTON RADIATION TOLERANT OPTOCOUPLER OPTOELECTRONIC PRODUCTS DIVISION 12/23/2009 Features: Applications: * * * * * * * * * * High Reliability Base lead provided for conventional transistor biasing Rugged package Stability over wide temperature +1000V electrical isolation Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66260 is a single channel device electrically similar to the 4N48. This product has been designed to be more tolerant to proton radiation. The 66260 optocoupler is packaged in a hermetically sealed 6 pin gull wing package. This device can be supplied to customer specifications as well as tested and screened to the requirements of MIL-PRF-19500 up to space (JANS) level. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage .......................................................................................................................................................... 1 kV Emitter-Base Voltage ............................................................................................................................................................... 7 V Collector-Emitter Voltage (Value applies to emitter-base open-circuited & the input-diode equal to zero) ........................ 60 V Collector-Base Voltage .......................................................................................................................................................... 60 V Reverse Input Voltage ............................................................................................................................................................ 7 V Input Diode Continuous Forward Current at (or below) 65C Free-Air Temperature (see note 1) .................................. 50 mA Peak Forward Input Current (Value applies for tw 1s, PRR < 300 pps) ............................................................................ 1 A Continuous Collector Current ............................................................................................................................................. 50 mA Continuous Transistor Power Dissipation at (or below) 25C Free-Air Temperature (see Note 2) ............................... 300 mW Storage Temperature ......................................................................................................................................... -55C to +150C Operating Free-Air Temperature Range ............................................................................................................-55C to +100C Lead Solder Temperature (10 seconds max.)................................................................................................................... 240C Notes: 1. Derate linearly to 100C free-air temperature at the rate of 0.80 mA/C above 25C. 2. Derate linearly to 100C free-air temperature at the rate of 3 mW/C above 25C. Package Dimensions 4X 0.050 Schematic Diagram 0.008 MAX. E 6 B C 5 4 79 MIN. A 1 0.3500.010 0.193 0.125 6 E 4 C 1 2 3 A NC K K 3 0.010 6X 0.015 0.130 ALL TOLERANCES ARE 0.005 UNLESS OTHERWISE NOTED. A - ANODE OF DIODE B - BASE OF TRANSISTOR C - COLLECTOR OF TRANSISTOR E - EMITTER OF TRANSISTOR K - CATHODE OF DIODE MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E.Walnut St., Garland, TX 75040 * (972)272-3571 * Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 5 B 66260 6 PIN GULL WING PROTON RADIATION TOLERANT OPTOCOUPLER 12/23/2009 ELECTRICAL CHARACTERISTICS TA = 25C unless otherwise specified. PARAMETER SYMBOL Input Diode Static Reverse Current MIN TYP IR -55C Input Diode Static Forward Voltage VF 1.0 Input Diode Static Forward Voltage +25 C VF 0.8 Input Diode Static Forward Voltage +100C VF 0.8 1.8 MAX UNITS TEST CONDITIONS 100 A VR = 3 V 2.2 V IF = 10 mA 2.0 V IF = 10 mA 2.2 V IF = 10 mA MAX UNITS TEST CONDITIONS V IC = 100 A, IB = 0, IF = 0 NOTE OUTPUT TRANSISTOR TA = 25C unless otherwise specified. SYMBOL MIN Collector-Base Breakdown Voltage PARAMETER V(BR)CBO 45 Collector-Emitter Breakdown Voltage V(BR)CEO 40 V IC = 1mA, IB = 0, IF = 0 Emitter-Base Breakdown Voltage V(BR)EBO 7 V IC = 0 mA, IE = 100 A, IF = 0 Off-State Collector Current +100C TYP ICEO 100 nA VCE = 20 V, IF = 0 mA, IB = 0 ICEO 100 A VCE = 20 V, IF = 0 mA, IB = 0 MAX NOTE COUPLED CHARACTERISTICS TA = 25C unless otherwise specified. PARAMETER SYMBOL MIN UNITS TEST CONDITIONS IC(ON) 1.0 mA VCE = 5 V, IF = 1mA, IB = 0 On State Collector Current TYP On State Collector Current +100C IC(ON) 1.0 mA VCE = 5.0 V, IF = 2 mA, IB = 0 On State Collector Current -55C IC(ON) 1.0 mA VCE = 5 V, IF = 2 mA, IB = 0 0.3 V IF = 2 mA, IC= 1 mA Collector-Emitter Saturation Voltage VCE(SAT) 11 NOTE Input to Output Internal Resistance RIO VIN-OUT = 1000 V 1 Input to Output Capacitance CIO 2.5 5 pF f = 1MHz, VIN-OUT = 1000 V 1 tr 5 10 s tf 5 10 s Rise Time-Phototransistor Operation Fall Time-Phototransistor Operation 10 VCC = 10 V, IF = 10 mA, RL = 100 , IB = 0 VCC = 10 V, IF = 10 mA, RL = 100 , IB = 0 NOTES: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. 2. This parameter must be measured using pulse techniques (tW = 100 s duty cycle < 1%). RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX UNITS IFL 0 90 A Input Current, High Level IFH 1 10 mA Supply Voltage VCE 5 10 Input Current, Low Level Operating Temperature TA -55 100 V C SELECTION GUIDE PART NUMBER PART DESCRIPTION 66260-001 Commercial 66260-101 Screened to JAN Level 66260-103 Screened to JANTX Level 66260-105 Screened to JANTXV Level 66260-300 Screened to JANS Level MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E.Walnut St., Garland, TX 75040 * (972)272-3571 * Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM