DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 1 of 16
Applications
IEEE802.11b DSSS WLAN
IEEE802.11g OFDM WLAN
IEEE802.11a OFDM WLAN
IEEE802.11n WLAN
Access Points, PCMCIA, PC cards
Features
All RF ports matched to 50
Integrated 2.4 GHz PA, 5 GHz PA, T/R switch,
2.5GHz LNA, 5GHz LNA
Integrated Power Detector for each TX Chain
21 dBm O/P Power, 802.11b, 11 Mbits, ACPR =
35 dBc
18 dBm @ 3.0 % EVM, 802.11g, 54 Mbits
16 dBm @ 3.0 % EVM, 802.11a, 54 Mbits
Single supply voltage: 3.3 V ± 10 %
Lead free, Halogen free, RoHS compliant, MSL 1
4mm x 4mm x 0.9mm, QFN Package
Ordering Information
Part No. Package Remark
SE5502L 24 pin QFN Samples
SE5502L-R 24 pin QFN Tape and Reel
SE5502L-EK1 N/A Evaluation kit
Product Description
The SE5502L is a complete 802.11a/b/g/n WLAN RF
front-end module providing all the functionality of the
power amplifiers, filtering, power detector, T/R switch,
diplexers, LNA and associated matching. The
SE5502L provides a complete 2.4 GHz and 5 GHz
WLAN RF solution from the output of the transceiver
to the antenna in an ultra compact form factor.
Designed for ease of use, all RF ports are matched to
50 to simplify PCB layout and the interface to the
transceiver RFIC. The SE5502L also includes a
transmit power detector with 20 dB of dynamic range
for each transmit chain. Each transmit chain has a
separate digital enable control for transmitter power
ramp on/off control. The power ramp rise/fall time is
less than 0.7 sec.
The device also provides a notch filter from 3.260-
3.267 GHz and 3.28-3.89 GHz prior to the input of
each 2.4 GHz and 5 GHz power amplifiers,
respectively.
The SE5502L packaged in 4mm x 4mm x 0.9mm,
Halogen free, Lead free, ROHS compliant, MSL 3
QFN package.
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 2 of 16
Functional Block Diagram
ANT
Det
Rg
Ra
2GHz
PA
ENgENa
Tg
Ta
Filter
C0 C1
SP3T
Switch
Detector
5GHz
PA
2GHz
LNA
Decode
TX
Diplexer
Filter
5GHz
LNA
Figure 1: SE5502L Functional Block Diagram
Pin Out Diagram
Figure 2: SE5502L Pin Out (Top View Through Package)
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 3 of 16
Pin Out Description
Pin No. Name Description Pin No. Name Description
1 C0 Switch Control 13 GND Ground
2 Rg 2.4 GHz RF Receive Output 14 GND Ground
3 Ra 5 GHz RF Receive Output 15 GND Ground
4 Tg 2.4 GHz RF Transmit Input 16 GND Ground
5 Ta 5 GHz RF Transmit Input 17 ANT Antenna
6 Det 2.4/5 GHz Power Detector Output 18 GND Ground
7 ENa 5 GHz Power Amplifier Enable 19 GND Ground
8 ENg 2.4 GHz Power Amplifier Enable 20 GND Ground
9 VCC Supply Voltage 21 GND Ground
10 VCC Supply Voltage 22 GND Ground
11 VCC Supply Voltage 23 VCC Supply Voltage
12 VCC Supply Voltage 24 C1 Switch Control
Absolute Maximum Ratings
These are stress ratings only. Exposure to stresses beyond these maximum ratings may cause permanent damage
to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions
defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protected
workstations.
Symbol Definition Min. Max. Unit
VCC Supply Voltage -0.3 3.6 V
PU ENa, ENg, C0, C1 -0.3 3.6 V
TXRF Ta, Tg, ANT terminated in 6:1 load or better - 12.0 dBm
TA Operating Temperature Range -40 85 °C
TSTG Storage Temperature Range -40 150 °C
ESD HBM JEDEC JESD22-A114 all pins - 1000 V
Recommended Operating Conditions
Symbol Parameter Min. Typ. Max. Unit
VCC Supply Voltage 3.0 3.3 3.6 V
TA Ambient Temperature -40 25 85 °C
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 4 of 16
DC Electrical Characteristics
Conditions: VCC = 3.3 V, TA = 25 C, as measured on Skyworks Solutions’ SE5502L-EV1 evaluation board (de-
embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted
Symbol Parameter Conditions Min. Typ. Max. Unit
ICC-G Total 802.11g Transmit
Supply Current
POUT = 18 dBm, 54 Mbps
OFDM signal, 64 QAM
ENg = 3.3 V, ENa = 0 V,
100% duty cycle
- 150 - mA
ICC-B Total 802.11b Transmit
Supply Current
POUT = 21 dBm, 11 Mbps
CCK signal, BT = 0.45,
ENg = 3.3 V, ENa = 0 V,
100% duty cycle
- 175 - mA
ICC-A Total 802.11a Transmit
Supply Current
POUT = 16 dBm, 54 Mbps
OFDM signal, 64 QAM,
ENa = 3.3 V, ENg = 0 V,
100% duty cycle
- 210 - mA
Icc-Rxa Total Icc in Rx 5G band 5G LNA enabled - 19 - mA
Icc-Rxg Total Icc in Rx 2G band 2G LNA enabled - 18 - mA
ICC_OFF Total Supply Current No RF, ENg = ENa = 0 V - 50 180 A
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 5 of 16
PA Logic Characteristics
Conditions: VCC = 3.3 V, TA = 25 C, as measured on Skyworks Solutions’ SE5502L-EV1 evaluation board (de-
embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Conditions Min. Typ. Max. Unit
VENH Logic High Voltage for ENg,
ENa (Module On) - 1.8 - VCC V
VENL Logic Low Voltage ENg,
ENa (Module Off) - 0 - 0.4 V
IENH Input Current Logic High
Voltage (ENg, ENa) - - 50 400 A
IENL Input Current Logic Low
Voltage (ENg, ENa) VCC = 0.4V - 0 40 A
Switch/LNA Logic Characteristics
Conditions: VCC = 3.3 V, VEN = 0 V, TA = 25 C, as measured on Skyworks Solutions’ SE5502L-EV1 evaluation
board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Conditions Min. Typ. Max. Unit
VCTL_ON Control Voltage C0, C1
(On State) - 3.0 - 3.6 V
VCTL_OFF Control Voltage C0, C1
(OFF State) - 0.0 - 0.4 V
ICTL_ON Switch Control Bias
Current (RF Applied)
On pin (TX, RX) being
driven high. RF Applied - - 100
A
ICTL_ON Switch Control Bias
Current (No RF)
On pin (TX, RX) being
driven high. No RF - - 30 A
Switch & LNA Control Logic Table
C0 C1 EnG EnA Tg ↔ ANT Ta ↔ ANT Rg ↔ ANT Ra ↔ ANT
VCTL_OFF VCTL_OFF VENH VENL ON OFF OFF OFF
VCTL_OFF VCTL_OFF VENL VENH OFF ON OFF OFF
VCTL_OFF VCTL_ON VENL VENL OFF OFF LNA Bypass ON LNA Bypass ON
VCTL_ON VCTL_OFF VENL VENL OFF OFF OFF LNA ON
VCTL_ON VCTL_ON VENL VENL OFF OFF LNA ON OFF
VCTL_OFF VCTL_OFF VENL VENL Stand By Mode, PAs and LNAs OFF – Low Current Consumption
All Other States Not Supported
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 6 of 16
2.4 GHz AC Electrical Characteristics
2.4 GHz Transmit Characteristics
Conditions: VCC = 3.3 V, ENg = 3.3 V, ENa = C0 = C1 = 0 V, TA = 25 C, as measured on Skyworks Solutions’
SE5502L-EV1 evaluation board, all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FIN Frequency Range - 2400 - 2500 MHz
P802.11g Output power 54 Mbps OFDM signal, 64QAM,
EVM = 3.0 % - 18 - dBm
P802.11b Output power
11 Mbps CCK signal, BT = 0.45
ACPR(± 11MHz offset) < -35
ACPR(± 22MHz offset) < -56
- 21 - dBm
P1dB P1dB - 23 25.5 - dBm
S21 Small Signal Gain - 25 28 30 dB
S21 Small Signal Gain
Variation Over Band - - 1.0 2.0 dB
S213.2 Gain at Ref-VCO 3200.00 to 3300.00 MHz - - 0 dB
2f,3f Harmonics Pout 21 dBm typ, 1Mbps, CCK - - -45.2 dBm/MHz
tr Rise Time 10 % to 90% of final output
power level - - 0.5 s
tdr, tdf Delay and rise/fall
Time
50 % of VEN edge and 90/10 %
of final output power level - - 0.5 s
S11 Input Return Loss - 8 10 - dB
STAB Stability
CW, POUT = 21 dBm
0.1 GHz – 21 GHz
Load VSWR = 6:1
All non-harmonically related outputs less
than -42 dBm/MHz
Ru Ruggedness Tg = 12dBm, ANT load varies
over 6:1 VSWR No Irreversible damage
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 7 of 16
2.4 GHz Receive Characteristics
Conditions: VCC = C0 = C1 = 3.3 V, ENg = ENa = 0 V, TA = 25 C, as measured on Skyworks Solutions’ SE5502L-
EV1 evaluation board, all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FOUT Frequency Range - 2400 - 2500 MHz
S21
Receive Gain, LNA
Enabled. 2400 – 2485 MHz 10 15
-
dB
Receive Gain,
Bypass mode
C0 = 0 V; C1 = 3.3 V
2400 – 2485 MHz - -7.5 - dB
S21 Gain Variation 2400 – 2485 MHz, Over
any 40MHz band - 0.25 0.5 dB
NF Noise Figure De-embedded to device - 2.5 2.8 dB
INT Interferer
@1710-1990MHz
With this input , IIP3 can
only degrade by 1dB -10 - - dBm
S11 Input Return Loss - - 8 - dB
IP1dB Input P1dB C0 = 3.3 V - -7 - dBm
TEN Enable Time
10% to 90% of RX RF
power, from time that C0
is at 50%
- 500 - nsec
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 8 of 16
5 GHz AC Electrical Characteristics
5 GHz Transmit Characteristics
Conditions: VCC = 3.3 V, ENa = 3.3 V, ENg = C0 = C1 = 0 V, TA = 25 C, as measured on Skyworks Solutions’
SE5502L-EV1 evaluation board, all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FIN Frequency Range - 4900 - 5875 MHz
P802.11a Nominal Output Power 54 Mbps OFDM signal, 64
QAM, EVM = 3.0 % - 16 - dBm
P1dB P1dB - 21 22.5 - dBm
S21 Small Signal Gain - 24 - 32 dB
S21
Small Signal Gain Variation Over 40 MHz Channel - - 0.5 dB
Small Signal Gain
Variation Over sub-
bands
- - 3 dB
S213.2 Gain 3280 to 3900 MHz - 3 9 dB
2f,3f Harmonics Pout 16 dBm typ,
54Mbps, 802.11a OFDM - - -45.2 dBm/MHz
tr Rise Time 10 % to 90% of final
output power level - - 0.5 s
tdr, tdf Delay and rise/fall
Time
50 % of VEN edge and
90/10 % of final output
power level
- - 0.5 s
S11 Input Return Loss - 5 7 - dB
STAB Stability
64 QAM, POUT = 16 dBm
0.1 GHz – 21 GHz
Load VSWR = 6:1
All non-harmonically related outputs less than
-42 dBm/MHz
Ru Ruggedness TXa = 12dBm, ANT load
varies over 6:1 VSWR No Irreversible damage
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 9 of 16
5 GHz Receive Characteristics
Conditions: VCC = C0 = 3.3 V, ENg = ENa = C1 = 0 V, TA = 25 C, as measured on Skyworks Solutions’ SE5502L-
EV1 evaluation board, all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FOUT Frequency Range - 4900 - 5850 MHz
S21
Receive Gain 4900 – 5850 MHz 10 12 - dB
Receive Gain,
Bypass mode C0 = 0.0 V; C1 = 3.3V - -20 - dB
S21 Gain Variation 4900 – 5850 MHz, Over
any 40MHz band - 1 - dB
NF Noise Figure De-embedded to device - 2.8 3.0 dB
S11 Return Loss - 10 15 - dB
IP1dB Input P1dB C0 = 3.3 V -6.5 - - dBm
TEN Enable Time
10% to 90% of RX RF
power, from time that C0
is at 50%
- 500 - nsec
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 10 of 16
2.4 GHz Power Detector Characteristic
Conditions: VCC = 3.3 V, ENg = 3.3 V, ENa = C0 = C1 = 0 V, TA = 25 C, as measured on Skyworks Solutions’
SE5502L-EV1 evaluation board, all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FOUT Frequency Range - 2400 - 2500 MHz
PDR Power detect range,
peak power
Measured at ANT0 or
ANT1 0 - 22 dBm
PDZOUT DC Output impedance - - 2.7 3 k
PDVP21 Output Voltage, POUT =
21dBm - - 0.85 - V
PDVp18 Output Voltage, POUT =
18dBm - - 0.65 - V
PDVpnoRF Output Voltage, POUT =
No RF - - 0.35 - V
LPF-3dB
Power detect low pass
filter -3dB corner
frequency
Load = high impedance
Typ: 500 k - 1500 - kHz
2.5GHz Pow e r De t e ct o r Re s p o ns e in to 1M Ω Load
0.3
0.5
0.7
0.9
1.1
3 5 7 9 11 13 15 17 19 21 23
Output Pow e r (dBm )
VDET (V)
2400 2450 2500
Figure 3: SE5502L Power Detector vs. Output Power over Frequency (CW Signal)
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 11 of 16
5 GHz Power Detector Characteristic
Conditions: VCC = 3.3 V, ENa = 3.3 V, ENg = C0 = C1 = 0 V, TA = 25 C, as measured on Skyworks Solutions’
SE5502L-EV1 evaluation board, all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FOUT Frequency Range - 4900 - 5850 MHz
PDR Power detect range,
peak power Measured at ANT 0 - 21 dBm
PDZOUT DC Output impedance - - 2.7 3.0 k
PDVp18 Output Voltage, POUT =
18dBm - - 0.78 - V
PDVp16 Output Voltage, POUT =
16dBm - - 0.65 - V
PDVNoRF Output Voltage, POUT =
No RF - - 0.35 - V
LPF-3dB
Power detect low pass
filter -3dB corner
frequency
Load = high impedance
Typ: 500 k - 1500 - kHz
5GHz Power Detector Response
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
02468101214161820
Pout(dBm)
VDET (V)
Pdet4900 Pdet5090 Pdet5470 Pdet5850
Figure 4: Preliminary SE5502L Power Detector vs. Output Power over Frequency (CW Signal)
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 12 of 16
Package Drawing
TOP SIDE BOTTOM SIDE
18
24
1
7
17 2
16 3
15 4
14 5
13 6
23
8
22
9
21
10
20
11
19
12
18
24
1
7
172
163
154
14
5
136
23
8
22
9
21
10
20
11
19
12
Figure 5: Package Drawing: Topside
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 13 of 16
Recommended Land and Solder Patterns
22
16
18
15
14
21 20
13
1922
8
163
172
181
154
14
5
21
9
20
10
23
7
24
12
613
19
11
3
2
1
4
5
6
16
17
18
15
14
13
22 21 202324 19
891071211
22
8
163
172
18
1
15
4
145
21
9
20
10
23
7
24
12
613
19
11
Figure 6: Recommended Land and Solder Patterns
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 14 of 16
Package Handling Information
Because of its sensitivity to moisture absorption, instructions on the shipping container label must be followed
regarding exposure to moisture after the container seal is broken, otherwise, problems related to moisture absorption
may occur when the part is subjected to high temperature during solder assembly. The SE5502L is capable of
withstanding a Pb free solder reflow. Care must be taken when attaching this product, whether it is done manually or
in a production solder reflow environment. If the part is manually attached, precaution should be taken to insure that
the device is not subjected to temperatures above its rated peak temperature for an extended period of time. For
details on both attachment techniques, precautions, and handling procedures recommended, please refer to:
“Quad Flat No-Lead Module Solder Reflow & Rework Information”, Document Number QAD-00045
“Handling, Packing, Shipping and Use of Moisture Sensitive QFN”, Document Number QAD-00044
Product Branding
Figure 7: SE5502L Branding Information
SiGe
5502L
Lot Code
Pin 1 Identifier
Part
Lot
Pin 1
e3
Terminal Finish
Caution! Class 1C ESD sensitive device
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 15 of 16
Tape and Reel Information
Parameter Value
Devices Per Reel 3000
Reel Diameter 13 inches
Tape Width 12 millimeters
Figure 8: Detailed Tape and Reel Information (All diminensions in Millimeters)
DATA SHEET
SE5502L:Dual Band 802.11a/b/g/n Wireless LAN Front End
Preliminary Information
Skyworks Solutions, Inc. ● Phone [781] 376-3000 ● Fax [781] 376-3100 ● sales@skyworksinc.com ● www.skyworksinc.com
DST-00318 Rev 1.8 ● Skyworks Proprietary Information ● Products and Product Information are Subject to Change Without Notice ● April 3, 2012 16 of 16
Document Change History
Revision Date Notes
1.0 Aug 25, 2009 Created
1.1 Feb 22, 2010 Updated
1.2 Jul 12, 2010 Updated switch control table and corrected block diagram
1.3 Sep 18, 2010
Updated 2GHz LNA gain variation over band.
Updated 5GHz TX gain min spec
Updated EN high current consumption.
1.4 Oct 7, 2010 Added “Stand By” mode setting to switch control logic table
1.5 Jan 27, 2011 Updated MSL rating to MSL1
Updated ESD rating to Class 1C
1.6 Apr 9, 2011 Updated to Industrial Temperature Range
1.7 Feb 17, 2012 Updated marking diagram
1.8 Apr 03, 2012 Updated with Skyworks logo and disclaimer statement
Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are
provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these
materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks
makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future
changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products
or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms
and Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING
FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH
WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS
CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER
OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal
injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify
Skyworks for any damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or
operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks
assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published
specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-
party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at
www.skyworksinc.com, are incorporated by reference.
