Ultrafast Dual Diode 30 A, 200 V RURG3020CC Description The RURG3020CC is an ultrafast dual diode with low forward voltage drop. This device is intended for use as freewheeling and clamping diodes in a variety of switching power supplies and other power switching applications. It is specially suited for use in switching power supplies and industrial application. Features * * * * * www.onsemi.com CATHODE (BOTTOM SIDE METAL) Ultrafast Recovery trr = 50 ns (@ IF = 30 A) Max Forward Voltage, VF = 1.0 V (@ TC = 25C) Reverse Voltage, VRRM = 200 V Avalanche Energy Rated This Device is Pb-Free and is RoHS Compliant ANODE 1 CATHODE ANODE 2 TO-247-3LD CASE 340CK Applications * Switching Power Supplies * Power Switching Circuits * General Purpose K A1 A2 MARKING DIAGRAM $Y&Z&3&K RURG3020C $Y &Z &3 &K RURG3020C = ON Semiconductor Logo = Assembly Plant Code = Numeric Date Code = Lot Code = Specific Device Code ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. (c) Semiconductor Components Industries, LLC, 2001 March, 2020 - Rev. 3 1 Publication Order Number: RURG3020CC/D RURG3020CC ABSOLUTE MAXIMUM RATINGS (Per Leg) (TC = 25C) Symbol Ratings Unit Peak Repetitive Reverse Voltage VRRM 200 V Working Peak Reverse Voltage VRWM 200 V VR 200 V Average Rectified Forward Current (Per Leg) (TC = 145C) IF(AV) 30 A Repetitive Peak Surge Current (Square Wave, 20 kHz) IFRM 70 A Nonrepetitive Peak Surge Current (Halfwave, 1 Phase, 60 Hz) IFSM 325 A PD 125 W EAVL 20 mJ TSTG, TJ -65 to 175 C Parameter DC Blocking Voltage Maximum Power Dissipation Avalanche Energy (See Figures 7 and 8) Operating and Storage Temperature Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. PACKAGE MARKING AND ORDERING INFORMATION Device Device Marking Package Shipping RURG3020CC RURG3020C TO-247-3LD 450 / Tube ELECTRICAL SPECIFICATION (Per Leg) (TC = 25C, unless otherwise specified) Parameter Symbol Instantaneous Forward Voltage (Pulse Width = 300 ms, Duty Cycle = 2%) VF Instantaneous Reverse Current IR Reverse Recovery Time (See Figure 6) Summation of ta + tb trr Time to Reach Peak Reverse Current (See Figure 6) Time from Peak IRM to Projected Zero Crossing of IRM Based on a Straight Line from Peak IRM through 25% of IRM (See Figure 6) Thermal Resistance Junction to Case Test Conditions Min Typ Max Unit IF = 30 A - - 1.0 V IF = 30 A, TC = 150C - - 0.85 V VR = 200 V - - 250 mA VR = 200 V, TC = 150C - - 1 mA IF = 1 A, dIF/dt = 100 A/ms - - 45 ns IF = 30 A, dIF/dt = 100 A/ms - - 50 ns ta IF = 30 A, dIF/dt = 100 A/ms - 20 - ns tb IF = 30 A, dIF/dt = 100 A/ms - 15 - ns - - 1.2 C/W RqJC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 RURG3020CC 200 400 100 100 IR, Reverse Current (mA) IF, Forward Current (A) TYPICAL PERFORMANCE CURVES 175C 100C 10 25C 1 0 0.3 0.6 0.9 175C 10 100C 1.0 0.1 0.01 1.2 0.001 1.5 25C 50 0 VF, Forward Voltage (V) IF(AV), Average Forward Current (A) 40 trr t, Time (ns) 30 ta tb 10 0 1 10 IF, Forward Current (A) 150 200 Figure 2. Reverse Current vs. Reverse Voltage Figure 1. Forward Current vs. Forward Voltage 20 100 VR, Reverse Voltage (V) 40 30 20 SQ. WAVE 10 0 130 30 DC 140 150 160 170 TC, Case Temperature (C) Figure 4. Current Derating Curve Figure 3. trr, ta and tb Curves vs. Forward Current www.onsemi.com 3 180 RURG3020CC TEST CIRCUITS AND WAVEFORMS VGE AMPLITUDE AND RG CONTROL dIF/dt t1 AND t2 Control IF L DUT CURRENT SENSE RG VGE dIF dt trr ta 0 + - IGBT t1 IF VDD 0.25 IRM IRM t2 Figure 6. trr Waveforms and Definitions Figure 5. trr Test Circuit I=1A L = 40 mH R < 0.1 W EAVL = 1/2LI2 [VR(AVL)/(VR(AVL) - VDD)] Q1 = IGBT (BVCES > DUT VR(AVL) tb VAVL L R CURRENT SENSE + VDD DUT VDD - IL IL I V Q1 t0 t1 t2 t Figure 8. Avalanche Current and Voltage Waveforms Figure 7. Avalanche Energy Test Circuit www.onsemi.com 4 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO-247-3LD SHORT LEAD CASE 340CK ISSUE A A DATE 31 JAN 2019 A E P1 P A2 D2 Q E2 S B D 1 2 D1 E1 2 3 L1 A1 L b4 c (3X) b 0.25 M (2X) b2 B A M DIM (2X) e GENERIC MARKING DIAGRAM* AYWWZZ XXXXXXX XXXXXXX XXXX = Specific Device Code A = Assembly Location Y = Year WW = Work Week ZZ = Assembly Lot Code *This information is generic. Please refer to device data sheet for actual part marking. Pb-Free indicator, "G" or microdot "G", may or may not be present. Some products may not follow the Generic Marking. DOCUMENT NUMBER: DESCRIPTION: 98AON13851G TO-247-3LD SHORT LEAD A A1 A2 b b2 b4 c D D1 D2 E E1 E2 e L L1 P P1 Q S MILLIMETERS MIN NOM MAX 4.58 4.70 4.82 2.20 2.40 2.60 1.40 1.50 1.60 1.17 1.26 1.35 1.53 1.65 1.77 2.42 2.54 2.66 0.51 0.61 0.71 20.32 20.57 20.82 13.08 ~ ~ 0.51 0.93 1.35 15.37 15.62 15.87 12.81 ~ ~ 4.96 5.08 5.20 ~ 5.56 ~ 15.75 16.00 16.25 3.69 3.81 3.93 3.51 3.58 3.65 6.60 6.80 7.00 5.34 5.46 5.58 5.34 5.46 5.58 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. (c) Semiconductor Components Industries, LLC, 2018 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative