© Semiconductor Components Industries, LLC, 2001
March, 2020 − Rev. 3
1Publication Order Number:
RURG3020CC/D
Ultrafast Dual Diode
30 A, 200 V
RURG3020CC
Description
The RURG3020CC is an ultrafast dual diode with low forward
voltage drop. This device is intended for use as freewheeling
and clamping diodes in a variety of switching power supplies
and other power switching applications. It is specially suited for use
in switching power supplies and industrial application.
Features
•Ultrafast Recovery trr = 50 ns (@ IF = 30 A)
•Max Forward Voltage, VF = 1.0 V (@ TC = 25°C)
•Reverse Voltage, VRRM = 200 V
•Avalanche Energy Rated
•This Device is Pb−Free and is RoHS Compliant
Applications
•Switching Power Supplies
•Power Switching Circuits
•General Purpose
www.onsemi.com
MARKING DIAGRAM
TO−247−3LD
CASE 340CK
$Y = ON Semiconductor Logo
&Z = Assembly Plant Code
&3 = Numeric Date Code
&K = Lot Code
RURG3020C = Specific Device Code
$Y&Z&3&K
RURG3020C
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
ANODE 2
CATHODE
ANODE 1
CATHODE
(BOTTOM SIDE METAL)
K
A2
A1
RURG3020CC
www.onsemi.com
2
ABSOLUTE MAXIMUM RATINGS (Per Leg) (TC = 25°C)
Parameter Symbol Ratings Unit
Peak Repetitive Reverse Voltage VRRM 200 V
Working Peak Reverse Voltage VRWM 200 V
DC Blocking Voltage VR200 V
Average Rectified Forward Current (Per Leg) (TC = 145°C) IF(AV) 30 A
Repetitive Peak Surge Current (Square Wave, 20 kHz) IFRM 70 A
Nonrepetitive Peak Surge Current (Halfwave, 1 Phase, 60 Hz) IFSM 325 A
Maximum Power Dissipation PD125 W
Avalanche Energy (See Figures 7 and 8) EAVL 20 mJ
Operating and Storage Temperature TSTG, TJ−65 to 175 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
PACKAGE MARKING AND ORDERING INFORMATION
Device Device Marking Package Shipping
RURG3020CC RURG3020C TO−247−3LD 450 / Tube
ELECTRICAL SPECIFICATION (Per Leg) (TC = 25°C, unless otherwise specified)
Parameter Symbol Test Conditions Min Typ Max Unit
Instantaneous Forward Voltage
(Pulse Width = 300 ms, Duty Cycle = 2%)
VFIF = 30 A − − 1.0 V
IF = 30 A, TC = 150°C− − 0.85 V
Instantaneous Reverse Current IRVR = 200 V − − 250 mA
VR = 200 V, TC = 150°C− − 1 mA
Reverse Recovery Time (See Figure 6)
Summation of ta + tb
trr IF = 1 A, dIF/dt = 100 A/ms− − 45 ns
IF = 30 A, dIF/dt = 100 A/ms− − 50 ns
Time to Reach Peak Reverse Current
(See Figure 6)
taIF = 30 A, dIF/dt = 100 A/ms−20 −ns
Time from Peak IRM to Projected Zero
Crossing of IRM Based on a Straight Line
from Peak IRM through 25% of IRM
(See Figure 6)
tbIF = 30 A, dIF/dt = 100 A/ms−15 −ns
Thermal Resistance Junction to Case RqJC − − 1.2 °C/W
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
RURG3020CC
www.onsemi.com
3
TYPICAL PERFORMANCE CURVES
Figure 1. Forward Current vs. Forward Voltage Figure 2. Reverse Current vs. Reverse Voltage
Figure 3. trr, ta and tb Curves vs. Forward Current Figure 4. Current Derating Curve
IF
, Forward Current (A)
t, Time (ns)
TC, Case Temperature (°C)
VF
, Forward Voltage (V)
IF
, Forward Current (A)
VR, Reverse Voltage (V)
IR, Reverse Current (mA)
IF(AV), Average Forward Current (A)
200
100
10
1
175°C
100°C
25°C
0 0.3 0.6 0.9 1.2 1.5
400
100
10
1.0
0.01
0.1
0.001
050 100 150 200
175°C
100°C
25°C
40
0
ta
tb
trr
10
20
30
11030
40
0
SQ. WAVE
DC
30
20
10
130 140 150 160 170 180
RURG3020CC
www.onsemi.com
4
TEST CIRCUITS AND WAVEFORMS
Figure 5. trr Test Circuit Figure 6. trr Waveforms and Definitions
Figure 7. Avalanche Energy Test Circuit Figure 8. Avalanche Current and Voltage
Waveforms
L
IGBT
CURRENT
SENSE
DUT
t1
t2
+
−
VGE AMPLITUDE AND
RG CONTROL dIF/dt
t1 AND t2 Control IF
VGE
RG
VDD
0
IFtatb
trr
dIF
dt
0.25 IRM
IRM
I = 1 A
L = 40 mH
R < 0.1 W
EAVL = 1/2LI2 [VR(AVL)/(VR(AVL) − VDD)]
Q1 = IGBT (BVCES > DUT VR(AVL)
DUT
CURRENT
SENSE
+
−
VDD
VDD
Q1
LR
VAVL
IL
IL
IV
t0t1t
t2
TO−247−3LD SHORT LEAD
CASE 340CK
ISSUE A
DATE 31 JAN 2019
XXXX = Specific Device Code
A = Assembly Location
Y = Year
WW = Work Week
ZZ = Assembly Lot Code
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
GENERIC
MARKING DIAGRAM*
AYWWZZ
XXXXXXX
XXXXXXX
E
D
L1
E2
(3X) b
(2X) b2
b4
(2X) e
Q
L
0.25 MBAM
A
A1
A2
A
c
B
D1
P1
S
P
E1
D2
2
13
2
DIM MILLIMETERS
MIN NOM MAX
A 4.58 4.70 4.82
A1 2.20 2.40 2.60
A2 1.40 1.50 1.60
b 1.17 1.26 1.35
b2 1.53 1.65 1.77
b4 2.42 2.54 2.66
c 0.51 0.61 0.71
D 20.32 20.57 20.82
D1 13.08 ~ ~
D2 0.51 0.93 1.35
E 15.37 15.62 15.87
E1 12.81 ~ ~
E2 4.96 5.08 5.20
e ~ 5.56 ~
L 15.75 16.00 16.25
L1 3.69 3.81 3.93
P 3.51 3.58 3.65
P1 6.60 6.80 7.00
Q 5.34 5.46 5.58
S 5.34 5.46 5.58
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
98AON13851G
DOCUMENT NUMBER:
DESCRIPTION:
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
TO−247−3LD SHORT LEAD
© Semiconductor Components Industries, LLC, 2018 www.onsemi.com
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
◊
