FDG6332C 20V N & P-Channel PowerTrench MOSFETs General Description Features The N & P-Channel MOSFETs are produced using Fairchild Semiconductor's advanced PowerTrench process that has been especially tailored to minimize on-state resistance and yet maintain superior switching performance. * Q1 0.7 A, 20V. RDS(ON) = 300 m @ VGS = 4.5 V RDS(ON) = 400 m @ VGS = 2.5 V * Q2 -0.6 A, -20V. RDS(ON) = 420 m @ VGS = -4.5 V RDS(ON) = 630 m @ VGS = -2.5 V These devices have been designed to offer exceptional power dissipation in a very small footprint for applications where the bigger more expensive TSSOP-8 and SSOP-6 packages are impractical. * Low gate charge * High performance trench technology for extremely low RDS(ON) Applications * SC70-6 package: small footprint (51% smaller than * DC/DC converter * Load switch * LCD display inverter SSOT-6); low profile (1mm thick) S G D D 1 6 2 5 3 4 G Pin 1 S SC70-6 Complementary Absolute Maximum Ratings Symbol o TA=25 C unless otherwise noted Q1 Q2 VDSS Drain-Source Voltage Parameter 20 -20 V VGSS Gate-Source Voltage 12 12 V ID Drain Current 0.7 -0.6 A PD Power Dissipation for Single Operation TJ, TSTG Operating and Storage Junction Temperature Range - Continuous (Note 1) - Pulsed 2.1 (Note 1) Units -2 0.3 W -55 to +150 C 415 C/W Thermal Characteristics RJA Thermal Resistance, Junction-to-Ambient (Note 1) Package Marking and Ordering Information Device Marking Device Reel Size Tape width Quantity .32 FDG6332C 7'' 8mm 3000 units 2003 Fairchild Semiconductor Corporation FDG6332C Rev C2 (W) FDG6332C September 2003 Symbol TA = 25C unless otherwise noted Parameter Test Conditions Min Typ Max Units Off Characteristics BVDSS Drain-Source Breakdown Voltage BVDSS TJ Breakdown Voltage Temperature Coefficient IDSS Zero Gate Voltage Drain Current IGSSF /IGSSR Gate-Body Leakage, Forward IGSSF /IGSSR Gate-Body Leakage, Reverse On Characteristics ID = 250 A VGS = 0 V, VGS = 0 V, ID = -250 A ID = 250 A,Ref. to 25C ID = -250 A,Ref. to 25C VDS = 16 V, VGS = 0 V VDS = -16 V, VGS = 0 V VGS = 12 V, VDS = 0 V VGS = 12V , VDS = 0 V Q1 Q2 Q1 Q2 Q1 Q2 20 -20 V 14 -14 mV/C 1 -1 100 100 A V (Note 2) Gate Threshold Voltage Q1 VDS = VGS, ID = 250 A 0.6 1.1 1.5 VDS = VGS, ID = -250 A -0.6 -1.5 VGS(th) TJ Gate Threshold Voltage Temperature Coefficient Q2 Q1 Q2 RDS(on) Static Drain-Source On-Resistance VGS(th) gFS ID(on) nA nA Q2 VGS = -4.5 V, ID = -0.6 A VGS = -2.5 V, ID = -0.5 A VGS=-4.5 V, ID =-0.6 A,TJ=125C -1.2 -2.8 3 180 293 247 300 470 400 Q1 VDS = 5 V ID = 0.7 A 2.8 Q2 VDS = -5 V ID = -0.6A 1.8 Q1 VGS = 4.5 V, VDS = 5 V Q2 VGS = -4.5 V, VDS = -5 V Q1 Forward Transconductance On-State Drain Current ID = 250 A,Ref. To 25C ID = -250 A,Ref. to 25C VGS = 4.5 V, ID =0.7 A VGS = 2.5 V, ID =0.6 A VGS = 4.5 V, ID =0.7A,TJ=125C mV/C 300 400 442 m 420 630 700 S A 1 -2 Dynamic Characteristics Ciss Coss Crss Input Capacitance Output Capacitance VDS=10 V, V GS= 0 V, f=1.0MHz 113 Q2 VDS=-10 V, V GS= 0 V, f=1.0MHz 114 Q1 VDS=10 V, V GS= 0 V, f=1.0MHz 34 Q2 VDS=-10 V, V GS= 0 V, f=1.0MHz 24 VDS=10 V, V GS= 0 V, f=1.0MHz 16 Q2 VDS=-10 V, V GS= 0 V, f=1.0MHz 9 Q1 For Q1: VDS =10 V, VGS= 4.5 V, Reverse Transfer Capacitance Q1 Switching Characteristics td(on) Q1 Turn-On Delay Time td(off) Turn-On Rise Time Q1 Turn-Off Delay Time Q2 Q1 Q2 tf Qg Qgs Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge pF I D= 1 A RGEN = 6 For Q2: VDS =-10 V, I D= -1 A VGS= -4.5 V, RGEN = 6 5 10 5.5 11 7 14 15 25 ns 9 18 ns 6 12 ns Q1 1.5 3 ns Q2 1.7 1.1 3.4 1.5 nC 1.4 2 Q1 Q2 Q1 Q2 Qgd pF (Note 2) Q2 tr pF Q1 Q2 For Q1: VDS =10 V, VGS= 4.5 V, For Q2: VDS =-10 V, VGS= -4.5 V, I D= 0.7 A RGEN = 6 I D= -0.6 A RGEN = 6 0.24 nC 0.3 0.3 0.4 nC FDG6332C Rev C2 (W) FDG6332C Electrical Characteristics Symbol TA = 25C unless otherwise noted Parameter Test Conditions Min Typ Max Units Drain-Source Diode Characteristics and Maximum Ratings IS VSD Maximum Continuous Drain-Source Diode Forward Current Drain-Source Diode Forward Voltage Q1 0.25 Q2 -0.25 Q1 VGS = 0 V, IS = 0.25 A (Note 2) 0.74 1.2 Q2 VGS = 0 V, IS = -0.25 A (Note 2) -0.77 -1.2 A V Notes: 1. RJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RJC is guaranteed by design while RJA is determined by the user's board design. RJA = 415C/W when mounted on a minimum pad of FR-4 PCB in a still air environment. 2. Pulse Test: Pulse Width < 300s, Duty Cycle < 2.0% FDG6332C Rev C2 (W) FDG6332C Electrical Characteristics FDG6332C Typical Characteristics: N-Channel 1.8 4 3.0V RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE ID, DRAIN CURRENT (A) VGS=4.5V 3.5V 2.5V 3 2 2.0V 1 1.6 VGS = 2.5V 1.4 3.0V 1.2 3.5V 4.0V 0.8 0 0 1 2 3 0 4 1 Figure 1. On-Region Characteristics. 3 4 Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. 0.8 1.6 ID =0.7A VGS = 4.5V RDS(ON), ON-RESISTANCE (OHM) RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 2 I D, DRAIN CURRENT (A) VDS, DRAIN-SOURCE VOLTAGE (V) 1.4 1.2 1 0.8 ID =0.4A 0.6 TA = 125oC 0.4 TA = 25oC 0.2 0 0.6 -50 -25 0 25 50 75 100 125 1 150 2 3 4 5 VGS , GATE TO SOURCE VOLTAGE (V) TJ, JUNCTION TEMPERATURE (oC) Figure 3. On-Resistance Variation with Temperature. Figure 4. On-Resistance Variation with Gate-to-Source Voltage. 10 2.5 2 VGS = 0V 25oC IS, REVERSE DRAIN CURRENT (A) o TA = -55 C VDS = 5V I D, DRAIN CURRENT (A) 4.5V 1 125oC 1.5 1 0.5 1 TA = 125oC 25 oC 0.1 o -55 C 0.01 0.001 0.0001 0 0.5 1 1.5 2 2.5 VGS, GATE TO SOURCE VOLTAGE (V) Figure 5. Transfer Characteristics. 3 0 0.2 0.4 0.6 0.8 1 1.2 VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. FDG6332C Rev C2 (W) FDG6332C Typical Characteristics: N-Channel 200 VDS = 5V ID = 0.7A f = 1MHz VGS = 0 V 10V 4 15V CAPACITANCE (pF) VGS, GATE-SOURCE VOLTAGE (V) 5 3 2 150 CISS 100 COSS 50 1 CRSS 0 0 0 0.4 0.8 1.2 0 1.6 Figure 7. Gate Charge Characteristics. 10 15 20 Figure 8. Capacitance Characteristics. 10 10 RDS(ON) LIMIT P(pk), PEAK TRANSIENT POWER (W) ID, DRAIN CURRENT (A) 5 VDS, DRAIN TO SOURCE VOLTAGE (V) Qg , GATE CHARGE (nC) 100s 1ms 1 10ms 100ms 1s VGS = 4.5V SINGLE PULSE RJA = 415oC/W 0.1 DC TA = 25oC 0.01 0.1 1 10 VDS, DRAIN-SOURCE VOLTAGE (V) Figure 9. Maximum Safe Operating Area. 100 SINGLE PULSE RJA = 415C/W TA = 25C 8 6 4 2 0 0.001 0.01 0.1 1 10 100 t 1, TIME (sec) Figure 10. Single Pulse Maximum Power Dissipation. FDG6332C Rev C2 (W) FDG6332C Typical Characteristics: P-Channel 2 1.8 VGS = -4.5V RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE -3.0V -ID, DRAIN CURRENT (A) -3.5V 1.6 -2.5V 1.2 0.8 -2.0V 0.4 VGS = -2.5V 1.6 1.4 -3.0V 1.2 -3.5V -4.0V -4.5V 1 0.8 0 0 1 2 3 0 4 0.5 Figure 11. On-Region Characteristics. 2 1.2 ID = -0.6A VGS = -4.5V 1.3 RDS(ON), ON-RESISTANCE (OHM) RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 1.5 Figure 12. On-Resistance Variation with Drain Current and Gate Voltage. 1.4 1.2 1.1 1 0.9 0.8 ID = -0.3 A 1 0.8 TA = 125oC 0.6 TA = 25o C 0.4 0.2 0.7 -50 -25 0 25 50 75 100 125 1 150 2 3 4 5 -VGS, GATE TO SOURCE VOLTAGE (V) o TJ, JUNCTION TEMPERATURE ( C) Figure 13. On-Resistance Variation with Temperature. Figure 14. On-Resistance Variation with Gate-to-Source Voltage. 10 2 TA = -55 oC VGS = 0V 25oC -IS, REVERSE DRAIN CURRENT (A) VDS = -5V o -ID, DRAIN CURRENT (A) 1 -ID, DRAIN CURRENT (A) -VDS, DRAIN-SOURCE VOLTAGE (V) 125 C 1.5 1 0.5 1 o TA = 125 C 0.1 o 25 C 0.01 -55oC 0.001 0.0001 0 0.5 1 1.5 2 2.5 -VGS, GATE TO SOURCE VOLTAGE (V) Figure 15. Transfer Characteristics. 3 0 0.2 0.4 0.6 0.8 1 1.2 -VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 16. Body Diode Forward Voltage Variation with Source Current and Temperature. FDG6332C Rev C2 (W) FDG6332C Typical Characteristics: P-Channel 160 ID = -0.6A VDS = -5V f = 1MHz VGS = 0 V -10V 4 -15V CAPACITANCE (pF) -VGS, GATE-SOURCE VOLTAGE (V) 5 3 2 120 CISS 80 COSS 40 1 CRSS 0 0 0 0.3 0.6 0.9 1.2 1.5 0 1.8 5 Figure 17. Gate Charge Characteristics. 15 20 Figure 18. Capacitance Characteristics. 10 10 100s RDS(ON) LIMIT 10ms 100ms 1s VGS = -4.5V SINGLE PULSE RJA = 415 oC/W DC 6 4 2 TA = 25oC 0.01 0.1 o TA = 25 C 1ms 1 0.1 SINGLE PULSE o RJA = 415 C/W 8 POWER (W) -ID, DRAIN CURRENT (A) 10 -V DS, DRAIN TO SOURCE VOLTAGE (V) Qg, GATE CHARGE (nC) 1 10 -VDS, DRAIN-SOURCE VOLTAGE (V) 0 0.001 100 0.01 0.1 1 10 100 SINGLE PULSE TIME (SEC) Figure 19. Maximum Safe Operating Area. Figure 20. Single Pulse Maximum Power Dissipation. r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 1 D = 0.5 RJA(t) = r(t) * RJA RJA = 415 C/W 0.2 0.1 0.1 P(pk) 0.05 t1 0.02 t2 0.01 TJ - TA = P * RJA(t) Duty Cycle, D = t1 / t2 0.01 SINGLE PULSE 0.001 0.0001 0.001 0.01 0.1 1 10 100 t1, TIME (sec) Figure 21. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1. Transient thermal response will change depending on the circuit board design. FDG6332C Rev C2 (W) TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM FACT Quiet SeriesTM ActiveArrayTM FAST BottomlessTM FASTrTM CoolFETTM FRFETTM CROSSVOLTTM GlobalOptoisolatorTM DOMETM GTOTM EcoSPARKTM HiSeCTM E2CMOSTM I2CTM TM EnSigna ImpliedDisconnectTM FACTTM ISOPLANARTM Across the board. Around the world.TM The Power FranchiseTM Programmable Active DroopTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC OPTOPLANARTM PACMANTM POPTM Power247TM PowerTrench QFET QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SILENT SWITCHER SMART STARTTM SPMTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogic TINYOPTOTM TruTranslationTM UHCTM UltraFET VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I5