Loose R.46 X2 CLASS (IEC 60384-14) - MKP Series Taped Fig.1 metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES Fig.2 Typical applications: interference suppression and across-the-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. PRODUCT CODE: R46 Insulated rigid leads O d 0.05 Insulated flexible leads 0.5mm2 p 15 22.5 p 27.5 p = 37.5 0.6 or 0.8* 0.8 1 Note: R.46 series has replaced the 1.40 series and 1.47 series. For new design we suggest the use of the R.46 series. *See size table. All dimensions are in mm. Pitch Box thickness (B) (mm) (mm) Maximum dimensions (mm) B max H max L max 10.0 15.0 15.0 22.5 27.5 37.5 B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 All <7.5 7.5 All All All H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 GENERAL TECHNICAL DATA test method and performance Dielectric: polypropylene film. Damp heat, steady state: Plates: metal layer deposited by evaporation under vacuum. Test conditions 1st Winding: non-inductive type. Temperature: Relative humidity (RH): Test duration: Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. Operating temperature range: -40 to +110C Rated voltage (VR): IEC 60384-14, EN 60384-14. Capacitance range: 275Vac (50/60Hz) / 560 Vdc 300Vac (50/60Hz) / 630 Vdc Endurance: Test conditions Temperature: Test duration: Voltage applied: 0.01F to 10F Capacitance values: E6 series (IEC 60063 Norm). 10 (6)* at 1kHz Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: Performance 1x105 M (5x105 M )* 30000 s (150000 s )* * Typical value +25C5C 1 min 100 Vdc Solder bath temperature: +260C 5C Dipping time (with heat screen):10 s 1 s Performance Capacitance change |C/C|: 2% Winding scheme for C0.33F for C>0.33F single sided metallized polypropylene film Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25C5C 05/2007 +110C 2C 1000 h 1.25 x VR +1000Vac 0.1 s/h Performance Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M); tolerance 5% (J) available upon request Dissipation factor (DF): tg 10-4 at +25C 5C: * Typical value +60C 2C 95% 2% 500 hours Performance Climatic category: 40/110/56 IEC 60068-1 electrical characteristics +40C 2C 93% 2% 56 days Test conditions 2nd Temperature: Relative humidity (RH): Test duration: Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Related documents: L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 158 R.46 X2 CLASS (IEC 60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES APPROVALS Rated Cap. Od 275 Vac / 560 Vdc Std dimensions Max dv/dt at 390Vdc Part Number (**) (V/ s) B H L p 0.010 F 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2100 - - N0 - 0.015 F 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2150 - - N0 - 0.022 F 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2220 - - N0 - 0.033 F 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2330 - - M1 - 0.047 F 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2470 - - N0 - 0.068 F 6.0 12.0 13.0 10.0 0.6 500 R46 KF 2680 - - M1 - 0.10 F 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3100 - - M1 M 0.010 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2100 - - 01 - 0.015 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2150 - - 01 - 0.022 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2220 - - 01 - 0.033 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2330 - - 01 - 0.047 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2470 - - 01 - 0.068 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2680 - - 01 - 0.10 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 3100 - - M1 - 0.15 F 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3150 - - M2 - 0.15 F 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3150 - - L2 - 0.22 F 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3220 - - M2 - 0.22 F 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3220 - - L2 - 0.22 F 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3220 - - 02 - 0.33 F 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3330 - - N0 - 0.33 F 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3330 - - M1 - 0.33 F 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3330 - - N1 M 0.33 F 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3330 - - 02 - 0.33 F 13.0 12.0 18.0 15.0 0.8 400 R46 KI 3330 - - 01 - 0.47 F 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3470 - - 02 M 0.47 F 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3470 - - N0 M 0.47 F 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3470 - - M1 - 0.56 F 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3560 - - N0 - 0.60 F 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3600 - - N0 - 0.15 F 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3150 - - 01 - 0.22 F 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3220 - - M1 0.33 F 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3330 - - N0 0.47 F 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3470 - - N0 - 0.68 F 10.0 18.5 26.5 22.5 0.8 200 R46 KN 3680 - - M2 - 1.0 F 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - N2 M 1.0 F 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4100 - - N1 - 0.47 F 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3470 - - 01 - 0.68 F 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3680 - - M1 - 1.0 F 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4100 - - M1 - 1.5 F 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4150 - - M1 - 2.2 F 13.0 25.0 32.0 27.5 0.8 150 R46 KR 4220 - - M2 - 2.2 F 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4220 - - M1 - 3.3 F 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4330 - - M2 - 4.7 F 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - M2 - 4.7 F 22.0 37.0 32.0 27.5 0.8 150 R46 KR 4470 - - M1 - 1.5 F 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4150 - - M1 - 2.2 F 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - M2 M 2.2 F 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4220 - - M1 - 3.3 F 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4330 - - M1 - 4.7 F 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - M2 M 4.7 F 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4470 - - M1 - 6.8 F 20.0 40.0 41.5 37.5 1.0 100 R46 KW 4680 - - M2 - 6.8 F 24.0 44.0 41.5 37.5 1.0 100 R46 KW 4680 - - M1 - 10.0 F 30.0 45.0 41.5 37.5 1.0 100 R46 KW 5100 - - M1 - ENEC IEC 60384-14 Class X2 File No.V4413 CSA E 384-14 (up to 5.6F) Across-the-line File No.154612 (LR 83890) UL 1414 (up to 1F, 85C; 250Vac) Across-the-line File No.E97797 UL 1283 (310 Vac) Electromagnetic Interference Filters File No.E85238 GB/T 14472 Class X2 File CQC3001008199 CQC3001008842 Approved according to IEC 60384-14 (ex-former EN 132400) According to IEC 60065 . (**)ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style Lead length P2 (mm) Fig. (No.) Pitch (mm) Ordering code (Digit 10 to 11) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ - REEL O500mm - REEL O500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK (mm) Loose, short leads Loose, long leads Loose, long leads Loose, insulated rigid leads Loose, insulated flexible leads Taping style 04 +2 25 -1/+2 30 +5 00 50 40 30 +5 51 150 5 52 Note: Ammo-pack is the preferred packaging for taped version. For "capacitor connected in serial with main line" (two - phase and three - phase net) application, please read the "SHORT GUIDE TO CHOOSE THE RIGHT FILM CAPACITORS" at pag. 152 and contact our Technical Service for choosing the safest solution. Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) All dimensions are in mm E12 Series available upon request 159 05/2007 R.46 X2 CLASS (IEC 60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES APPROVALS Rated Cap. Od 275 Vac / 560 Vdc Std dimensions Max dv/dt at 390Vdc Part Number (**) (V/ s) H L p 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2330 - - P0 - 0.047 F 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2470 - - P0 - 0.068 F 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2680 - - P0 - 0.1 F 5.0 11.0 13.0 10.0 0.6 500 R46 KF 3100 - - P1 M 0.1 F 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3100 - - P0 - 0.15 F 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3150 - - P0 M 0.15 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 3150 - - P0 - 0.22 F 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3220 - - P0 - 0.33 F 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3330 - - P0 - 0.33 F 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3330 - - P1 0.33 F 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3330 - - P2 0.47 F 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3470 - - P0 0.47 F 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3470 - - P1 M 0.47 F 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3470 - - P2 M 0.47 F 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3470 - - P3 - 0.68 F 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3680 - - P1 M 0.68 F 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3680 - - P0 - 0.82 F 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3820 - - P0 M 0.47 F 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3470 - - P1 - 0.56 F 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3560 - - P1 M 0.56 F 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3560 - - P0 - 0.68 F 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3680 - - P0 - 1.0 F 8.5 17.0 26.5 22.5 0.8 200 R46 KN 4100 - - P1 M 1.0 F 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - P0 - 1.5 F 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4150 - - P1 M 1.5 F 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4150 - - P0 - 2.2 F 13.0 22.0 26.5 22.5 0.8 200 R46 KN 4220 - - P0 M 1.0 F 9.0 17.0 32.0 27.5 0.8 150 R46 KR 4100 - - P0 - 1.5 F 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4150 - - P0 - 2.2 F 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4220 - - P0 - 3.3 F 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4330 - - P0 - 4.7 F 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4470 - - P1 M 4.7 F 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - P0 - 6.8 F 22.0 37.0 32.0 27.5 0.8 150 R46 KR 4680 - - P0 - 2.2 F 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - P0 - 3.3 F 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4330 - - P0 - 4.7 F 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - P0 - 6.8 F 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4680 - - P0 - 10.0 F 20.0 40.0 41.5 37.5 1.0 100 R46 KW 5100 - - P0 - IN PR OG RE SS B 0.033 F Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) - ENEC IEC 60384-14 Class X2 File No.V4413 CSA E 384-14 (up to 5.6F) Across-the-line File No.154612 (LR 83890) in progress UL 1414 (up to 1F, 85C; 250Vac) Across-the-line File No.E97797 in progress UL 1283 (310 Vac) Electromagnetic Interference Filters File No.E85238 GB/T 14472 Class X2 File CQC3001008199 CQC3001008842 Approved according to IEC 60384-14 (ex-former EN 132400) According to IEC 60065 . (**)ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style Lead length Taping style Ordering code (Digit 10 to 11) P2 (mm) Fig. (No.) Pitch (mm) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ REEL O500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK (mm) REEL O500mm Loose, short leads Loose, long leads Loose, long leads Loose, insulated rigid leads Loose, insulated flexible leads 04 +2 25 -1/+2 30 +5 00 50 40 30 +5 51 150 5 52 Note: Ammo-pack is the preferred packaging for taped version. All dimensions are in mm For "capacitor connected in serial with main line" (two - phase and three - phase net) application, please read the "SHORT GUIDE TO CHOOSE THE RIGHT FILM CAPACITORS" at pag. 152 and contact our Technical Service for choosing the safest solution. E12 Series available upon request 05/2007 160 R.46 X2 CLASS (IEC 60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES APPROVALS Rated Cap. Od 300 Vac / 630 Vdc Std dimensions Max dv/dt at 390Vdc Part Number (**) B H L p 0.010 F 5.0 11.0 13.0 10.0 0.6 500 R46 3F 2100 - - M1 - 0.015 F 5.0 11.0 13.0 10.0 0.6 500 R46 3F 2150 - - M1 - 0.022 F 5.0 11.0 13.0 10.0 0.6 500 R46 3F 2220 - - M1 - 0.033 F 5.0 11.0 13.0 10.0 0.6 500 R46 3F 2330 - - M1 - 0.047 F 6.0 12.0 13.0 10.0 0.6 500 R46 3F 2470 - - M1 - 0.068 F 6.0 12.0 13.0 10.0 0.6 500 R46 3F 2680 - - M1 - (V/ s) 0.1 F 6.0 12.0 13.0 10.0 0.6 500 R46 3F 3100 - - M1 M 0.010 F 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2100 - - 01 - 0.015 F 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2150 - - 01 - 0.022 F 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2220 - - 01 - 0.033 F 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2330 - - 01 - 0.047 F 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2470 - - 01 - 0.068 F 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2680 - - 01 - 0.10 F 5.0 11.0 18.0 15.0 0.6 400 R46 3I 3100 - - M1 M 0.10 F 6.0 12.0 18.0 15.0 0.6 400 R46 3I 3100 - - 01 - 0.15 F 6.0 12.0 18.0 15.0 0.6 400 R46 3I 3150 - - M2 M 0.15 F 7.5 13.5 18.0 15.0 0.6 400 R46 3I 3150 - - M1 - 0.22 F 7.5 13.5 18.0 15.0 0.6 400 R46 3I 3220 - - M2 M 0.22 F 8.5 14.5 18.0 15.0 0.6 400 R46 3I 3220 - - M1 - 0.22 F 9.0 12.5 18.0 15.0 0.6 400 R46 3I 3220 - - L2 - 0.33F 10.0 16.0 18.0 15.0 0.8 400 R46 3I 3330 - - M1 - 0.33 F 13.0 12.0 18.0 15.0 0.8 400 R46 3I 3330 - - 01 - 0.47 F 11.0 19.0 18.0 15.0 0.8 400 R46 3I 3470 - - M1 - 0.15 F 6.0 15.0 26.5 22.5 0.8 200 R46 3N 3150 - - 01 - 0.22 F 6.0 15.0 26.5 22.5 0.8 200 R46 3N 3220 - - M1 - 0.33 F 7.0 16.0 26.5 22.5 0.8 200 R46 3N 3330 - - M1 - 0.47 F 8.5 17.0 26.5 22.5 0.8 200 R46 3N 3470 - - M1 - 0.68 F 10.0 18.5 26.5 22.5 0.8 200 R46 3N 3680 - - M2 - 1.0 F 13.0 22.0 26.5 22.5 0.8 200 R46 3N 4100 - - M1 - 0.47 F 9.0 17.0 32.0 27.5 0.8 150 R46 3R 3470 - - 01 - 0.68 F 9.0 17.0 32.0 27.5 0.8 150 R46 3R 3680 - - M1 - 1.0 F 11.0 20.0 32.0 27.5 0.8 150 R46 3R 4100 - - M1 - 1.5 F 13.0 22.0 32.0 27.5 0.8 150 R46 3R 4150 - - M1 - 2.2 F 13.0 25.0 32.0 27.5 0.8 150 R46 3R 4220 - - M2 - 2.2 F 14.0 28.0 32.0 27.5 0.8 150 R46 3R 4220 - - M1 - 2.2 F 18.0 33.0 32.0 27.5 0.8 150 R46 3R 4220 - - 01 - 3.3 F 18.0 33.0 32.0 27.5 0.8 150 R46 3R 4330 - - M2 - 3.3 F 22.0 37.0 32.0 27.5 0.8 150 R46 3R 4330 - - M1 - 4.7 F 18.0 33.0 32.0 27.5 0.8 150 R46 3R 4470 - - M2 - 4.7 F 22.0 37.0 32.0 27.5 0.8 150 R46 3R 4470 - - M1 - 1.5 F 11.0 22.0 41.5 37.5 1.0 100 R46 3W 4150 - - M1 - 2.2 F 11.0 22.0 41.5 37.5 1.0 100 R46 3W 4220 - - M2 M 2.2 F 13.0 24.0 41.5 37.5 1.0 100 R46 3W 4220 - - M1 - 3.3 F 16.0 28.5 41.5 37.5 1.0 100 R46 3W 4330 - - M1 - 4.7 F 16.0 28.5 41.5 37.5 1.0 100 R46 3W 4470 - - M2 M 4.7 F 19.0 32.0 41.5 37.5 1.0 100 R46 3W 4470 - - M1 - 6.8 F 20.0 40.0 41.5 37.5 1.0 100 R46 3W 4680 - - M2 - 6.8 F 24.0 44.0 41.5 37.5 1.0 100 R46 3W 4680 - - M1 - 10.0 F 30.0 45.0 41.5 37.5 1.0 100 R46 3W 5100 - - M1 - Rated voltage (3=300Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) ENEC IEC 60384-14 Class X2 File No.V4413 CSA E 384-14-95 (up to 5.6F) Across-the-line File No.154612 (LR 83890) UL 1414 up to 1F, 85C; 250Vac) Across-the-line File No.E97797 UL 1283 (310 Vac) Electromagnetic Interference Filters File No.E85238 GB/T 14472 Class X2 File CQC3001008199 CQC3001008842 Approved according to IEC 60384-14 (ex-former EN 132400) According to IEC 60065 (**)ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style Lead length Taping style Ordering code (Digit 10 to 11) P2 (mm) Fig. (No.) Pitch (mm) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ REEL O500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK (mm) REEL O500mm Loose, short leads Loose, long leads Loose, long leads Loose, insulated rigid leads Loose, insulated flexible leads 04 +2 25 -1/+2 30 +5 00 50 40 30 +5 51 150 5 52 Note: Ammo-pack is the preferred packaging for taped version. For "capacitor connected in serial with main line" (two - phase and three - phase net) application, please read the "SHORT GUIDE TO CHOOSE THE RIGHT FILM CAPACITORS" at pag. 152 and contact our Technical Service for choosing the safest solution. All dimensions are in mm E12 Series available upon request 161 05/2007 Loose R.46 X2 CLASS (IEC 60384-14) - MKP Taped Fig.1 Fig.2 metallized POLYpropylene film CAPACITOR SELF-HEALING PROPERTIES Typical applications: interference suppression and acrossthe-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. PRODUCT CODE: R46 O d 0.05 p 15 p = 22.5 0.6 or 0.8* 0.8 NEW 125C *See size table. All dimensions are in mm. Rated Cap. GENERAL TECHNICAL DATA Dielectric: polypropylene film. Plates: metal layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Climatic category: 40/125/56 IEC 60068-1 Operating temperature range: -40 to +125C Related documents: IEC 60384-14; EN 60384-14 electrical characteristics Rated voltage (VR): Capacitance range: 275 Vac (50/60Hz) / 560 Vdc 0.01F to 1F test method and performance Endurance: Test conditions 275 Vac / 560 Vdc Std dimensions Od Max dv/dt at 390Vdc (V/ s) Part Number B H L p 0.010 F 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2100 - - H1 - 0.015 F 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2150 - - H1 - 0.022 F 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2220 - - H1 - 0.033 F 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2330 - - H1 - 0.047 F 6.0 12.0 13.0 10.0 0.6 500 R46 K F 2470 - - H1 - 0.068 F 6.0 12.0 13.0 10.0 0.6 500 R46 K F 2680 - - H1 M 0.010 F 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2100 - - H1 - 0.015 F 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2150 - - H1 - 0.022 F 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2220 - - H1 - 0.033 F 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2330 - - H1 - 0.047 F 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2470 - - H1 - 0.068 F 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2680 - - H1 - 0.10 F 6.0 12.0 18.0 15.0 0.6 400 R46 K I 3100 - - H1 - 0.15 F 6.0 17.5 18.0 15.0 0.6 400 R46 K I 3150 - - H2 - 0.15 F 9.0 12.5 18.0 15.0 0.6 400 R46 K I 3150 - - H3 - 0.15 F 7.5 13.5 18.0 15.0 0.6 400 R46 K I 3150 - - H1 - 0.22 F 8.5 14.5 18.0 15.0 0.6 400 R46 K I 3220 - - H1 - Temperature: Test duration: +125C2C 1000 h 0.22 F 6.0 17.5 18.0 15.0 0.6 400 R46 K I 3220 - - H2 M 0.22 F 9.0 12.5 18.0 15.0 0.6 400 R46 K I 3220 - - H3 M Voltage applied: Performance Dielectric strength: 1.25 x VR +1000Vac 0.1 s/h 0.22 F 7.5 18.5 18.0 15.0 0.8 400 R46 K I 3220 - - H4 - 0.33 F 10.0 16.0 18.0 15.0 0.8 400 R46 K I 3330 - - H1 M 0.33 F 7.5 18.5 18.0 15.0 0.8 400 R46 K I 3330 - - H2 M 0.33 F 13.0 12.0 18.0 15.0 0.8 400 R46 K I 3330 - - H3 M 0.47 F 11.0 19.0 18.0 15.0 0.8 400 R46 K I 3470 - - H1 M 0.15 F 6.0 15.0 26.5 22.5 0.8 200 R46 K N 3150 - - H1 - 0.22 F 6.0 15.0 26.5 22.5 0.8 200 R46 K N 3220 - - H1 - 0.33 F 7.0 16.0 26.5 22.5 0.8 200 R46 K N 3330 - - H1 - 0.47 F 10.0 18.5 26.5 22.5 0.8 200 R46 K N 3470 - - H1 - 0.68 F 11.0 20.0 26.5 22.5 0.8 200 R46 K N 3680 - - H1 - 1.0 F 13.0 22.0 26.5 22.5 0.8 200 R46 K N 4100 - - H1 - no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Approvals (**) ENEC IEC 60384-14 Class X2 File No.CA08.00063 CSA E 384-14-95 Across-the-line File No.154612 (LR83890) UL 1414 up to 1F, 85C; 250Vac) Across-the-line File No.E97797 UL 1283 (310 Vac) Electromagnetic Interference Filters File No.E85238 Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) E12 Series available upon request Approved according to IEC 60384-14 (ex-former EN 132400) According to IEC 60065 (**) ENEC mark has replaced all the following European National marks: 05/2007 All dimensions are in mm For "capacitor connected in serial with main line" (two - phase and three - phase net) application, please read the "SHORT GUIDE TO CHOOSE THE RIGHT FILM CAPACITORS" at pag. 152 and contact our Technical Service for choosing the safest solution. 162 R.46S X2 CLASS (IEC 60384-14) - MKP Series Loose metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES Taped Fig.1 Fig.2 Typical applications: This special R46 release is specifically designed for applications with particular protection against severe ambient conditions. PRODUCT CODE: R46 O d 0.05 p 15 22.5 p 27.5 p = 37.5 0.6 or 0.8* 0.8 1.0 *See size table. All dimensions are in mm. Pitch Box thickness (B) (mm) (mm) Maximum dimensions (mm) B max H max L max 10.0 15.0 15.0 22.5 27.5 37.5 B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 All <7.5 7.5 All All All H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 GENERAL TECHNICAL DATA test method and performance Dielectric: polypropylene film. Damp heat, steady state: Plates: metal layer deposited by evaporation under vacuum. Test conditions 1st Winding: non-inductive type. Temperature: Relative humidity (RH): Test duration: Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Temperature: Relative humidity (RH): Test duration: Voltage value: Operating temperature range: -40 to +110C IEC 60384-14, EN 60384-14. electrical characteristics 275Vac (50/60Hz) / 560 Vdc Capacitance range: 0.022F to 10F Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. Endurance: Test conditions Temperature: Test duration: Voltage applied: Dissipation factor (DF): tg 10-4 at +25C 5C: 15 (8)* at 1kHz * Typical value Temperature: Voltage charge time: Voltage charge: Performance 1x105 M (5x105 M )* 30000 s (150000 s )* * Typical value +110C 2C 1000 h 1.25 x VR +1000Vac 0.1 s/h Performance Insulation resistance: Test conditions +40C 2C 93% 2% 500 hours 230 Vac, 50 Hz Performance Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M). tolerance 5% (J) available upon request +60C 2C 95% 2% 500 hours Test conditions 3rd Climatic category: 40/110/56 IEC 60068-1 Rated voltage (VR): +40C 2C 93% 2% 56 days Test conditions 2nd Temperature: Relative humidity (RH): Test duration: Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Related documents: L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 Dielectric strength: +25C5C 1 min 100 Vdc no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Resistance to soldering heat: for C0.33F for C>0.33F Test conditions Solder bath temperature: +260C 5C Dipping time (with heat screen):10 s 1 s Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25C5C Performance Capacitance change |C/C|: 2% 163 05/2007 R.46S X2 CLASS (IEC60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES APPROVALS Rated Cap. (*) Od 275 Vac / 560 Vdc Std dimensions Max dv/dt at 390Vdc Part Number (**) (V/ s) ENEC IEC 60384-14 Class X2 File No.V4413 CSA E 384-14-95 (up to 5.6 F) Across-the-line File No.154612 (LR 83890) UL 1414 up to 1F, 85C; 250Vac) Across-the-line File No.E97797 UL 1283 (310 Vac) Electromagnetic Interference Filters File No.E85238 GB/T 14472 Class X2 File CQC3001008199 CQC3001008842 B H L p 0.022 F 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2220 - - S0 - 0.033 F 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2330 - - S0 - 0.047 F 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2470 - - S0 - 0.068 F 6.0 12.0 13.0 10.0 0.6 500 R46 KF 2680 - - S0 - 0.068 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2680 - - S0 - 0.10 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 3100 - - S1 M 0.10 F 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3100 - - S0 - 0.15 F 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3150 - - S1 M 0.15 F 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3150 - - S0 - 0.22 F 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3220 - - S1 M 0.22 F 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3220 - - S0 - 0.22 F 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3220 - - S2 - 0.22 F 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3220 - - S3 - 0.33 F 13.0 12.0 18.0 15.0 0.8 400 R46 KI 3330 - - S1 - 0.33 F 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3330 - - S0 - 0.33 F 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3330 - - S2 - 0.47 F 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3470 - - S0 - 0.22 F 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3220 - - S0 - 0.33 F 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3330 - - S1 M 0.33 F 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3330 - - S0 - 0.47 F 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3470 - - S1 M 0.47 F 8.5 17.0 26.5 22.5 0.8 200 R46 KN 3470 - - S0 - 0.68 F 10.0 18.5 26.5 22.5 0.8 200 R46 KN 3680 - - S0 - 1.0 F 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - S2 M 1.0 F 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4100 - - S1 - 1.0 F 13.0 22.0 26.5 22.5 0.8 200 R46 KN 4100 - - S0 - 1.2 F 13.0 22.0 26.5 22.5 0.8 200 R46 KN 4120 - - S0 - 0.47 F 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3470 - - S0 - 0.68 F 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3680 - - S1 - 1.0 F 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4100 - - S1 - 1.5 F 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4150 - - S1 - 2.2 F 13.0 25.0 32.0 27.5 0.8 150 R46 KR 4220 - - S2 - 3.3 F 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4330 - - S2 - 4.7 F 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - S2 - 1.5 F 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4150 - - S1 - 2.2 F 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - S2 M 2.2 F 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4220 - - S1 - 3.3 F 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4330 - - S1 - REEL O500mm 4.7 F 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - S2 M 4.7 F 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4470 - - S1 - 6.8 F 20.0 40.0 41.5 37.5 1.0 100 R46 KW 4680 - - S2 - Loose, short leads Loose, long leads Loose, long leads 10.0 F 30.0 45.0 41.5 37.5 1.0 100 R46 KW 5100 - - S1 - Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) E12 Series available upon request Approved according to IEC 60384-14 (ex-former EN 132400) According to IEC 60065 (**)ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style Taping style Ordering code (Digit 10 to 11) P2 (mm) Fig. (No.) Pitch (mm) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ REEL O500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK (mm) Loose, insulated rigid leads Loose, insulated flexible leads 04 +2 25 -1/+2 30 +5 00 50 40 30 +5 51 150 5 52 Note: Ammo-pack is the preferred packaging for taped version. All dimensions are in mm 05/2007 Lead length 164 Loose R.46+R Capacitors with discharge resistor X2 CLASS (IEC 60384-14) - MKP Series Taped Fig.1 Fig.2 metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES Insulated rigid leads Typical applications: interference suppression and across-the-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. Insulated flexible leads 0.5mm2 PRODUCT CODE: R46 O d 0.05 P= 22.5 to 27.5 p = 37.5 0.8 1 All dimensions are in mm. Pitch Box thickness (B) (mm) (mm) Maximum dimensions (mm) B max H max L max 22.5 27.5 37.5 B +0.2 B +0.2 B +0.3 All All All H +0.1 H +0.1 H +0.1 GENERAL TECHNICAL DATA test method and performance Dielectric: polypropylene film. Damp heat, steady state: Plates: metal layer deposited by evaporation under vacuum. Test conditions 1st Winding: non-inductive type. Temperature: Relative humidity (RH): Test duration: Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. Endurance: Operating temperature range: -40 to +110C Test conditions electrical characteristics Temperature: Test duration: Voltage applied: Related documents: Rated voltage (VR): +40C 2C 93% 2% 56 days Performance Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Climatic category: 40/110/56 IEC 60068-1 L +0.3 L +0.3 L +0.3 IEC 60384-14, EN 60384-14. 275Vac (50/60Hz) / 560 Vdc 300Vac (50/60Hz) / 630 Vdc +110C 2C 1000 h 1.25 x VR +1000Vac 0.1 s/h Performance Dielectric strength: Capacitance range: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. 0.22F to 10F Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M). Dissipation factor (DF): tg 10-4 at +25C 5C: * Typical value Resistance to soldering heat: Test conditions Solder bath temperature: +260C 5C Dipping time (with heat screen):10 s 1 s 10 (6)* at 1kHz Performance Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: Performance 1x105 M (5x105 M )* 30000 s (150000 s )* * Typical value Capacitance change |C/C|: 2% +25C5C 1 min 100 Vdc APPROVALS for C0.33F for C>0.33F Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25C5C ENEC IEC 60384-14 Class X2 File No.V4413 UL 1414 up to 1F, 85C; 250Vac) Across-the-line File No.E97797 UL 1283 (250 Vac-105C) Electromagnetic Interference File No.E85238 Filters Approved according to IEC 60384-14 (ex-former EN 132400) According to IEC 60065. 165 05/2007 R.46+R Capacitors with discharge resistor X2 CLASS (IEC 60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES PRODUCT CODE: R46 Rated Cap. (*) 275 Vac / 560 Vdc Std dimensions B H L Od p Max dv/dt at 390Vdc (V/ s) Part Number Table 1 Standard packaging style 0.22 F 7.0 16.0 26.5 22.5 0.8 200 R46KN 3220 - - 01 - - 0.33 F 8.5 17.0 26.5 22.5 0.8 200 R46KN 3330 - - 01 - - REEL O500mm 0.8 200 R46KN 3470 - - 01 - - 0.68 F 11.0 20.0 26.5 22.5 0.8 200 R46KN 3680 - - 01 - - 0.47 F 11.0 20.0 32.0 27.5 0.8 150 R46KR 3470 - - 01 - - Loose, short leads Loose, long leads Loose, long leads 0.68 F 11.0 20.0 32.0 27.5 0.8 150 R46KR 3680 - - M1 - - 1.0 F 13.0 22.0 32.0 27.5 0.8 150 R46KR 4100 - - M1 - - 1.5 F 13.0 22.0 32.0 27.5 0.8 150 R46KR 4150 - - M1 - - 2.2 F 14.0 28.0 32.0 27.5 0.8 150 R46KR 4220 - - M1 - - 3.3 F 18.0 33.0 32.0 27.5 0.8 150 R46KR 4330 - - M2 - - 4.7 F 22.0 37.0 32.0 27.5 0.8 150 R46KR 4470 - - M1 - - 1.5 F 11.0 22.0 41.5 37.5 1.0 100 R46KW 4150 - - M1 - - 1 2.2 F 13.0 24.0 41.5 37.5 1.0 100 R46KW 4220 - - M1 - - 3.3 F 16.0 28.5 41.5 37.5 1.0 100 R46KW 4330 - - M1 - - R 4 6 4.7 F 19.0 32.0 41.5 37.5 1.0 100 R46KW 4470 - - M1 - - 6.8 F 20.0 40.0 41.5 37.5 1.0 100 R46KW 4680 - - M2 - - 10.0 F 24.0 44.0 41.5 37.5 1.0 100 R46KW 5100 - - M1 - - Rated Cap. (*) 300 Vac / 630 Vdc Std dimensions B H L Od p Max dv/dt at 390Vdc (V/ s) Part Number 0.22 F 7.0 16.0 26.5 22.5 0.8 200 R463N 3220 - - 01 - - 0.33 F Loose, insulated rigid leads Loose, insulated flexible leads 2 3 4 5 Digit 1 to 3 Digit 4 Digit 5 Digit 6 to 9 Digit 10 to 11 Digit 12 Digit 13 Digit 14 Digit 15 200 R463N 3330 - - 01 - - 200 R463N 3470 - - 01 - - 0.68 F 11.0 20.0 26.5 22.5 0.8 200 R463N 3680 - - 01 - - 0.47 F 11.0 20.0 32.0 27.5 0.8 150 R463R 3470 - - 01 - - 0.68 F 11.0 20.0 32.0 27.5 0.8 150 R463R 3680 - - M1 - - 1.0 F 13.0 22.0 32.0 27.5 0.8 150 R463R 4100 - - M1 - - 1.5 F 13.0 22.0 32.0 27.5 0.8 150 R463R 4150 - - M1 - - R code (-) 2.2 F 14.0 28.0 32.0 27.5 0.8 150 R463R 4220 - - M1 - - 470 k E 3.3 F 18.0 33.0 32.0 27.5 0.8 150 R463R 4330 - - M2 - - 680 k F 4.7 F 22.0 37.0 32.0 27.5 0.8 150 R463R 4470 - - M1 - - 1 M G 1.5 F 11.0 22.0 41.5 37.5 1.0 100 R463W 4150 - - M1 - - 1.2 M L 1.5 M N 100 R463W 4220 - - M1 - - 100 R463W 4330 - - M1 - - 4.7 F 19.0 32.0 41.5 37.5 1.0 100 R463W 4470 - - M1 - - 6.8 F 20.0 40.0 41.5 37.5 1.0 100 R463W 4680 - - M2 - - 10.0 F 24.0 44.0 41.5 37.5 1.0 100 R463W 5100 - - M1 - - Rated voltage (3=300Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) Value of discharge resistor (Table 2) 05/2007 Pitch (mm) 19.05 2 22.5/27.5 CK 04 +2 25 -1/+2 30 +5 00 50 40 30 +5 51 150 5 52 6 7 8 9 10 11 12 13 14 15 - Series code. a.c. rated voltage: K = 275Vac; 3 = 300Vac Pitch: N = 22.5; R = 27.5; W = 37.5 mm Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Mechanical version and/or packaging (table 1) Identifies the dimensions and electrical characteristics. Internal use Capacitance tolerance: K=10%; M=20% Value of the discharge resistor (tolerance10%) 0.8 1.0 Fig. (No.) - 0.8 1.0 P2 (mm) The part number, comprising 15 digits, is formed as follows: 8.5 17.0 26.5 22.5 3.3 F 16.0 28.5 41.5 37.5 Ordering code (Digit 10 to 11) Product code system 0.47 F 10.0 18.5 26.5 22.5 2.2 F 13.0 24.0 41.5 37.5 Taping style (mm) 0.47 F 10.0 18.5 26.5 22.5 Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) Value of discharge resistor (Table 2) Lead length according to the following table*: Table 2 2.2 M P 3.3 M Q 4.7 M S 6.8 M T 10 M V All dimensions are in mm 166 *Other resistors are avaible upon request.