05/2007 158
GENERAL TECHNICAL DATA
Dielectric:
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads:
Protection:
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range:
Related documents: IEC 60384-14, EN 60384-14.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 275Vac (50/60Hz) / 560 Vdc
300Vac (50/60Hz) / 630 Vdc
Capacitance range: 0.01µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±±
tolerance ±
Dissipation factor (DF):
tgδ 10-4± 10 (6)* at 1kHz
* Typical value
Insulation resistance:
Test conditions
±5°C
Performance
1x105 MΩ (5x105 MΩ )* for C0.33µF
30000 s (150000 s )* for C>0.33µF
* Typical value
Test voltage between terminations (on all pieces):
±5°C
R.46
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
Typical applications
electric shock.
R46
Note: R.46 series has replaced the 1.40 series and 1.47 series.
Ø d ±0.05 p 15 22.5 p 27.5 p = 37.5
0.6 or 0.8* 0.8 1
*See size table.
All dimensions are in mm.
Loose Taped
Fig.1 Fig.2
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions 1st
± 2°C
±2%
Test conditions 2nd
± 2°C
±2%
Performance
R (d.c.)/1 min
Capacitance change |5%
50% of initial limit.
Endurance:
Test conditions
± 2°C
R
Performance
R (d.c.)/1 min
Capacitance change |10%
50% of initial limit.
Resistance to soldering heat:
Test conditions
± 5°C
± 1 s
Performance
Capacitance change |2%
Winding scheme
single sided metallized
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
10.0 All
15.0 <7.5
15.0
22.5 All
27.5 All
37.5 All
Insulated rigid leads 2
05/2007
159
R.46
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
APPROVALS
.
All dimensions are in mm
(**)
ENEC
IEC 60384-14 Class X2 File No.V4413
CSA
E 384-14
(up to 5.6µF)
Across-the-line File No.154612
(LR 83890)
UL 1414
(up to 1µ
250Vac)
Across-the-line File No.E97797
UL 1283
(310 Vac)
Electromagnetic
Interference
Filters
File No.E85238
Class X2
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to
11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
12.70
19.05
1
2
10.0/15.0
22.5
REEL Ø500mm
REEL Ø500mm
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
Loose, short leads
Loose, long leads
Loose, long leads
04
25
30
00
50
40
Loose, insulated
rigid leads
Loose, insulated
30
150 ±5
51
52
our Technical Service for choosing the safest solution.
Rated Cap. 275 Vac / 560 Vdc
Std dimensions
Ø d Max
dv/dt at
390Vdc
Part Number
B H L p (V/ µs)
0.010 µF 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2100 - - N0 -
0.015 µF 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2150 - - N0 -
0.022 µF 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2220 - - N0 -
0.033 µF 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2330 - - M1 -
0.047 µF 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2470 - - N0 -
0.068 µF 6.0 12.0 13.0 10.0 0.6 500 R46 KF 2680 - - M1 -
0.10 µF 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3100 - - M1 M
0.010 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2100 - - 01 -
0.015 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2150 - - 01 -
0.022 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2220 - - 01 -
0.033 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2330 - - 01 -
0.047 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2470 - - 01 -
0.068 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2680 - - 01 -
0.10 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 3100 - - M1 -
0.15 µF 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3150 - - M2 -
0.15 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3150 - - L2 -
0.22 µF 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3220 - - M2 -
0.22 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3220 - - L2 -
0.22 µF 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3220 - - 02 -
0.33 µF 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3330 - - N0 -
0.33 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3330 - - M1 -
0.33 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3330 - - N1 M
0.33 µF 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3330 - - 02 -
0.33 µF 13.0 12.0 18.0 15.0 0.8 400 R46 KI 3330 - - 01 -
0.47 µF 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3470 - - 02 M
0.47 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3470 - - N0 M
0.47 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3470 - - M1 -
0.56 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3560 - - N0 -
0.60 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3600 - - N0 -
0.15 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3150 - - 01 -
0.22 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3220 - - M1 -
0.33 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3330 - - N0 -
0.47 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3470 - - N0 -
0.68 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 3680 - - M2 -
1.0 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - N2 M
1.0 µF 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4100 - - N1 -
0.47 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3470 - - 01 -
0.68 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3680 - - M1 -
1.0 µF 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4100 - - M1 -
1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4150 - - M1 -
2.2 µF 13.0 25.0 32.0 27.5 0.8 150 R46 KR 4220 - - M2 -
2.2 µF 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4220 - - M1 -
3.3 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4330 - - M2 -
4.7 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - M2 -
4.7 µF 22.0 37.0 32.0 27.5 0.8 150 R46 KR 4470 - - M1 -
1.5 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4150 - - M1 -
2.2 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - M2 M
2.2 µF 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4220 - - M1 -
3.3 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4330 - - M1 -
4.7 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - M2 M
4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4470 - - M1 -
6.8 µF 20.0 40.0 41.5 37.5 1.0 100 R46 KW 4680 - - M2 -
6.8 µF 24.0 44.0 41.5 37.5 1.0 100 R46 KW 4680 - - M1 -
10.0 µF 30.0 45.0 41.5 37.5 1.0 100 R46 KW 5100 - - M1 -
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
05/2007 160
R.46
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
APPROVALS
(**)
ENEC
IEC 60384-14 Class X2 File No.V4413
CSA
E 384-14
(up to 5.6µF)
Across-the-line
File No.154612
(LR 83890)
in progress
UL 1414
(up to 1µ
250Vac)
Across-the-line File No.E97797
in progress
UL 1283
(310 Vac)
Electromagnetic
Interference
Filters
File No.E85238
Class X2
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065
.
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
12.70
19.05
1
2
10.0/15.0
22.5
REEL Ø500mm
REEL Ø500mm
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
Loose, short leads
Loose, long leads
Loose, long leads
04
25
30
00
50
40
Loose, insulated
rigid leads
Loose, insulated
30
150 ±5
51
52
our Technical Service for choosing the safest solution.
Rated Cap. 275 Vac / 560 Vdc
Std dimensions
Ø d Max
dv/dt at
390Vdc
Part Number
B H L p (V/
µ
s)
0.033 µF 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2330 - - P0 -
0.047 µF 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2470 - - P0 -
0.068 µF 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2680 - - P0 -
0.1 µF 5.0 11.0 13.0 10.0 0.6 500 R46 KF 3100 - - P1 M
0.1 µF 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3100 - - P0 -
0.15 µF 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3150 - - P0 M
0.15 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 3150 - - P0 -
0.22 µF 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3220 - - P0 -
0.33 µF 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3330 - - P0 -
0.33 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3330 - - P1
0.33 µF 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3330 - - P2 -
0.47 µF 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3470 - - P0
0.47 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3470 - - P1 M
0.47 µF 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3470 - - P2 M
0.47 µF 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3470 - - P3 -
0.68 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3680 - - P1 M
0.68 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3680 - - P0 -
0.82 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3820 - - P0 M
0.47 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3470 - - P1 -
0.56 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3560 - - P1 M
0.56 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3560 - - P0 -
0.68 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3680 - - P0 -
1.0 µF 8.5 17.0 26.5 22.5 0.8 200 R46 KN 4100 - - P1 M
1.0 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - P0 -
1.5 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4150 - - P1 M
1.5 µF 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4150 - - P0 -
2.2 µF 13.0 22.0 26.5 22.5 0.8 200 R46 KN 4220 - - P0 M
1.0 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 4100 - - P0 -
1.5 µF 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4150 - - P0 -
2.2 µF 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4220 - - P0 -
3.3 µF 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4330 - - P0 -
4.7 µF 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4470 - - P1 M
4.7 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - P0 -
6.8 µF 22.0 37.0 32.0 27.5 0.8 150 R46 KR 4680 - - P0 -
2.2 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - P0 -
3.3 µF 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4330 - - P0 -
4.7 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - P0 -
6.8 µF 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4680 - - P0 -
10.0 µF 20.0 40.0 41.5 37.5 1.0 100 R46 KW 5100 - - P0 -
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
All dimensions are in mm
IN PROGRESS
05/2007
161
R.46
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
APPROVALS
(**)
ENEC
IEC 60384-14 Class X2 File No.V4413
CSA
E 384-14-95
(up to 5.6µF)
Across-the-line File No.154612
(LR 83890)
UL 1414
up to 1µ
250Vac)
Across-the-line File No.E97797
UL 1283
(310 Vac)
Electromagnetic
Interference
Filters
File No.E85238
Class X2
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
12.70
19.05
1
2
10.0/15.0
22.5
REEL Ø500mm
REEL Ø500mm
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
Loose, short leads
Loose, long leads
Loose, long leads
04
25
30
00
50
40
Loose, insulated
rigid leads
Loose, insulated
30
150 ±5
51
52
Rated Cap. 300 Vac / 630 Vdc
Std dimensions
Ø d Max
dv/dt at
390Vdc
Part Number
B H L p (V/ µs)
0.010 µF 5.0 11.0 13.0 10.0 0.6 500 R46 3F 2100 - - M1 -
0.015 µF 5.0 11.0 13.0 10.0 0.6 500 R46 3F 2150 - - M1 -
0.022 µF 5.0 11.0 13.0 10.0 0.6 500 R46 3F 2220 - - M1 -
0.033 µF 5.0 11.0 13.0 10.0 0.6 500 R46 3F 2330 - - M1 -
0.047 µF 6.0 12.0 13.0 10.0 0.6 500 R46 3F 2470 - - M1 -
0.068 µF 6.0 12.0 13.0 10.0 0.6 500 R46 3F 2680 - - M1 -
0.1 µF 6.0 12.0 13.0 10.0 0.6 500 R46 3F 3100 - - M1 M
0.010 µF 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2100 - - 01 -
0.015 µF 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2150 - - 01 -
0.022 µF 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2220 - - 01 -
0.033 µF 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2330 - - 01 -
0.047 µF 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2470 - - 01 -
0.068 µF 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2680 - - 01 -
0.10 µF 5.0 11.0 18.0 15.0 0.6 400 R46 3I 3100 - - M1 M
0.10 µF 6.0 12.0 18.0 15.0 0.6 400 R46 3I 3100 - - 01 -
0.15 µF 6.0 12.0 18.0 15.0 0.6 400 R46 3I 3150 - - M2 M
0.15 µF 7.5 13.5 18.0 15.0 0.6 400 R46 3I 3150 - - M1 -
0.22 µF 7.5 13.5 18.0 15.0 0.6 400 R46 3I 3220 - - M2 M
0.22 µF 8.5 14.5 18.0 15.0 0.6 400 R46 3I 3220 - - M1 -
0.22 µF 9.0 12.5 18.0 15.0 0.6 400 R46 3I 3220 - - L2 -
0.33µF 10.0 16.0 18.0 15.0 0.8 400 R46 3I 3330 - - M1 -
0.33 µF 13.0 12.0 18.0 15.0 0.8 400 R46 3I 3330 - - 01 -
0.47 µF 11.0 19.0 18.0 15.0 0.8 400 R46 3I 3470 - - M1 -
0.15 µF 6.0 15.0 26.5 22.5 0.8 200 R46 3N 3150 - - 01 -
0.22 µF 6.0 15.0 26.5 22.5 0.8 200 R46 3N 3220 - - M1 -
0.33 µF 7.0 16.0 26.5 22.5 0.8 200 R46 3N 3330 - - M1 -
0.47 µF 8.5 17.0 26.5 22.5 0.8 200 R46 3N 3470 - - M1 -
0.68 µF 10.0 18.5 26.5 22.5 0.8 200 R46 3N 3680 - - M2 -
1.0 µF 13.0 22.0 26.5 22.5 0.8 200 R46 3N 4100 - - M1 -
0.47 µF 9.0 17.0 32.0 27.5 0.8 150 R46 3R 3470 - - 01 -
0.68 µF 9.0 17.0 32.0 27.5 0.8 150 R46 3R 3680 - - M1 -
1.0 µF 11.0 20.0 32.0 27.5 0.8 150 R46 3R 4100 - - M1 -
1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R46 3R 4150 - - M1 -
2.2 µF 13.0 25.0 32.0 27.5 0.8 150 R46 3R 4220 - - M2 -
2.2 µF 14.0 28.0 32.0 27.5 0.8 150 R46 3R 4220 - - M1 -
2.2 µF 18.0 33.0 32.0 27.5 0.8 150 R46 3R 4220 - - 01 -
3.3 µF 18.0 33.0 32.0 27.5 0.8 150 R46 3R 4330 - - M2 -
3.3 µF 22.0 37.0 32.0 27.5 0.8 150 R46 3R 4330 - - M1 -
4.7 µF 18.0 33.0 32.0 27.5 0.8 150 R46 3R 4470 - - M2 -
4.7 µF 22.0 37.0 32.0 27.5 0.8 150 R46 3R 4470 - - M1 -
1.5 µF 11.0 22.0 41.5 37.5 1.0 100 R46 3W 4150 - - M1 -
2.2 µF 11.0 22.0 41.5 37.5 1.0 100 R46 3W 4220 - - M2 M
2.2 µF 13.0 24.0 41.5 37.5 1.0 100 R46 3W 4220 - - M1 -
3.3 µF 16.0 28.5 41.5 37.5 1.0 100 R46 3W 4330 - - M1 -
4.7 µF 16.0 28.5 41.5 37.5 1.0 100 R46 3W 4470 - - M2 M
4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R46 3W 4470 - - M1 -
6.8 µF 20.0 40.0 41.5 37.5 1.0 100 R46 3W 4680 - - M2 -
6.8 µF 24.0 44.0 41.5 37.5 1.0 100 R46 3W 4680 - - M1 -
10.0 µF 30.0 45.0 41.5 37.5 1.0 100 R46 3W 5100 - - M1 -
Rated voltage (3=300Vac)
Mechanical version and packaging (Table 1)
All dimensions are in mm
our Technical Service for choosing the safest solution.
05/2007 162
R.46
X2 CLASS (IEC 60384-14) - MKP
METALLIZED POLYPROPYLENE FILM CAPACITOR
Typical applications
shock.
R46
NEW 125°C
Ø d ±0.05 p 15 p = 22.5
0.6 or 0.8* 0.8
*See size table.
All dimensions are in mm.
GENERAL TECHNICAL DATA
Dielectric:
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads:
Protection:
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
manufacturing plant.
Climatic category: 40/125/56 IEC 60068-1
Operating temperature range:
Related documents: EN 60384-14
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 275 Vac (50/60Hz) / 560 Vdc
Capacitance range: 0.01µF to 1µF
TEST METHOD AND PERFORMANCE
Endurance:
Test conditions
±2°C
R
Performance
R (d.c.)/1 min
Capacitance change | 10%
50% of initial limit.
APPROVALS
(**)
ENEC
IEC 60384-14 Class X2 File No.CA08.00063
CSA
E 384-14-95 Across-the-line File No.154612
(LR83890)
UL 1414
up to 1µ
250Vac)
Across-the-line File No.E97797
UL 1283
(310 Vac)
Electromagnetic
Interference
Filters
File No.E85238
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065
Rated
Cap.
275 Vac / 560 Vdc
Std dimensions Ø d
Max
dv/dt at
390Vdc
(V/ µs)
Part Number
B H L p
0.010 µF 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2100 - - H1 -
0.015 µF 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2150 - - H1 -
0.022 µF 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2220 - - H1 -
0.033 µF 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2330 - - H1 -
0.047 µF 6.0 12.0 13.0 10.0 0.6 500 R46 K F 2470 - - H1 -
0.068 µF 6.0 12.0 13.0 10.0 0.6 500 R46 K F 2680 - - H1 M
0.010 µF 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2100 - - H1 -
0.015 µF 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2150 - - H1 -
0.022 µF 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2220 - - H1 -
0.033 µF 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2330 - - H1 -
0.047 µF 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2470 - - H1 -
0.068 µF 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2680 - - H1 -
0.10 µF 6.0 12.0 18.0 15.0 0.6 400 R46 K I 3100 - - H1 -
0.15 µF 6.0 17.5 18.0 15.0 0.6 400 R46 K I 3150 - - H2 -
0.15 µF 9.0 12.5 18.0 15.0 0.6 400 R46 K I 3150 - - H3 -
0.15 µF 7.5 13.5 18.0 15.0 0.6 400 R46 K I 3150 - - H1 -
0.22 µF 8.5 14.5 18.0 15.0 0.6 400 R46 K I 3220 - - H1 -
0.22 µF 6.0 17.5 18.0 15.0 0.6 400 R46 K I 3220 - - H2 M
0.22 µF 9.0 12.5 18.0 15.0 0.6 400 R46 K I 3220 - - H3 M
0.22 µF 7.5 18.5 18.0 15.0 0.8 400 R46 K I 3220 - - H4 -
0.33 µF 10.0 16.0 18.0 15.0 0.8 400 R46 K I 3330 - - H1 M
0.33 µF 7.5 18.5 18.0 15.0 0.8 400 R46 K I 3330 - - H2 M
0.33 µF 13.0 12.0 18.0 15.0 0.8 400 R46 K I 3330 - - H3 M
0.47 µF 11.0 19.0 18.0 15.0 0.8 400 R46 K I 3470 - - H1 M
0.15 µF 6.0 15.0 26.5 22.5 0.8 200 R46 K N 3150 - - H1 -
0.22 µF 6.0 15.0 26.5 22.5 0.8 200 R46 K N 3220 - - H1 -
0.33 µF 7.0 16.0 26.5 22.5 0.8 200 R46 K N 3330 - - H1 -
0.47 µF 10.0 18.5 26.5 22.5 0.8 200 R46 K N 3470 - - H1 -
0.68 µF 11.0 20.0 26.5 22.5 0.8 200 R46 K N 3680 - - H1 -
1.0 µF 13.0 22.0 26.5 22.5 0.8 200 R46 K N 4100 - - H1 -
All dimensions are in mm
Loose Taped
Fig.1 Fig.2
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
our Technical Service for choosing the safest solution.
05/2007
163
Loose Taped
Fig.1 Fig.2
Ø d ±0.05 p 15 22.5 p 27.5 p = 37.5
0.6 or 0.8* 0.8 1.0
*See size table.
All dimensions are in mm.
GENERAL TECHNICAL DATA
Dielectric:
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads:
Protection:
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range:
Related documents: IEC 60384-14, EN 60384-14.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 275Vac (50/60Hz) / 560 Vdc
Capacitance range: 0.022µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±±20% (M).
tolerance ±
Dissipation factor (DF):
tgδ 10-4±15 (8)* at 1kHz
* Typical value
Insulation resistance:
Test conditions
±5°C
Performance
1x105 MΩ (5x105 MΩ )* for C0.33µF
30000 s (150000 s )* for C>0.33µF
* Typical value
Test voltage between terminations (on all pieces):
±5°C
R.46S
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
Typical applications
severe ambient conditions.
R46
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
10.0 All
15.0 <7.5
15.0
22.5 All
27.5 All
37.5 All
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions 1st
± 2°C
±2%
Test conditions 2nd
± 2°C
±2%
Test conditions 3rd
± 2°C
±2%
Performance
R (d.c.)/1 min
Capacitance change |5%
50% of initial limit.
Endurance:
Test conditions
± 2°C
R
Performance
R (d.c.)/1 min
Capacitance change |10%
50% of initial limit.
Resistance to soldering heat:
Test conditions
± 5°C
± 1 s
Performance
Capacitance change |2%
05/2007 164
Rated Cap.
(*)
275 Vac / 560 Vdc
Std dimensions
Ø d Max
dv/dt at
390Vdc
Part Number
B H L p (V/ µs)
0.022 µF 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2220 - - S0 -
0.033 µF 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2330 - - S0 -
0.047 µF 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2470 - - S0 -
0.068 µF 6.0 12.0 13.0 10.0 0.6 500 R46 KF 2680 - - S0 -
0.068 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2680 - - S0 -
0.10 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 3100 - - S1 M
0.10 µF 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3100 - - S0 -
0.15 µF 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3150 - - S1 M
0.15 µF 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3150 - - S0 -
0.22 µF 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3220 - - S1 M
0.22 µF 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3220 - - S0 -
0.22 µF 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3220 - - S2 -
0.22 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3220 - - S3 -
0.33 µF 13.0 12.0 18.0 15.0 0.8 400 R46 KI 3330 - - S1 -
0.33 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3330 - - S0 -
0.33 µF 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3330 - - S2 -
0.47 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3470 - - S0 -
0.22 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3220 - - S0 -
0.33 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3330 - - S1 M
0.33 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3330 - - S0 -
0.47 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3470 - - S1 M
0.47 µF 8.5 17.0 26.5 22.5 0.8 200 R46 KN 3470 - - S0 -
0.68 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 3680 - - S0 -
1.0 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - S2 M
1.0 µF 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4100 - - S1 -
1.0 µF 13.0 22.0 26.5 22.5 0.8 200 R46 KN 4100 - - S0 -
1.2 µF 13.0 22.0 26.5 22.5 0.8 200 R46 KN 4120 - - S0 -
0.47 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3470 - - S0 -
0.68 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3680 - - S1 -
1.0 µF 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4100 - - S1 -
1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4150 - - S1 -
2.2 µF 13.0 25.0 32.0 27.5 0.8 150 R46 KR 4220 - - S2 -
3.3 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4330 - - S2 -
4.7 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - S2 -
1.5 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4150 - - S1 -
2.2 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - S2 M
2.2 µF 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4220 - - S1 -
3.3 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4330 - - S1 -
4.7 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - S2 M
4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4470 - - S1 -
6.8 µF 20.0 40.0 41.5 37.5 1.0 100 R46 KW 4680 - - S2 -
10.0 µF 30.0 45.0 41.5 37.5 1.0 100 R46 KW 5100 - - S1 -
R.46S
X2 CLASS (IEC60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
12.70
19.05
1
2
10.0/15.0
22.5
REEL Ø500mm
REEL Ø500mm
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
Loose, short leads
Loose, long leads
Loose, long leads
04
25
30
00
50
40
Loose, insulated
rigid leads
Loose, insulated
30
150 ±5
51
52
(**)
ENEC
IEC 60384-14 Class X2 File No.V4413
CSA
E 384-14-95
(up to 5.6 µF)
Across-the-line File No.154612
(LR 83890)
UL 1414
up to 1µ
250Vac)
Across-the-line File No.E97797
UL 1283
(310 Vac)
Electromagnetic
Interference
Filters
File No.E85238
Class X2
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065
APPROVALS
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
All dimensions are in mm
05/2007
165
Loose Taped
Fig.1 Fig.2
Insulated rigid leads 2
Ø d ±0.05 P= 22.5 to 27.5 p = 37.5
0.8 1
All dimensions are in mm.
GENERAL TECHNICAL DATA
Dielectric:
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads:
Protection:
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range:
Related documents: IEC 60384-14, EN 60384-14.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 275Vac (50/60Hz) / 560 Vdc
300Vac (50/60Hz) / 630 Vdc
Capacitance range: 0.22µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±±20% (M).
Dissipation factor (DF):
tgδ 10-4± 10 (6)* at 1kHz
* Typical value
Insulation resistance:
Test conditions
±5°C
Performance
1x105 MΩ (5x105 MΩ )* for C0.33µF
30000 s (150000 s )* for C>0.33µF
* Typical value
Test voltage between terminations (on all pieces):
±5°C
R.46+R
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
Typical applications
electric shock.
R46
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
22.5 All
27.5 All
37.5 All
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions 1st
± 2°C
±2%
Performance
R (d.c.)/1 min
Capacitance change |5%
50% of initial limit.
Endurance:
Test conditions
± 2°C
R
Performance
R (d.c.)/1 min
Capacitance change |10%
50% of initial limit.
Resistance to soldering heat:
Test conditions
± 5°C
± 1 s
Performance
Capacitance change |2%
APPROVALS
ENEC
IEC 60384-14 Class X2 File No.V4413
UL 1414
up to 1µ
250Vac)
Across-the-line File No.E97797
UL 1283
(250 Vac-105°C)
Electromagnetic
Interference
Filters
File No.E85238
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065.
05/2007 166
PRODUCT CODE SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R 4 6 - -
Digit 1 to 3 Series code.
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table 1)
characteristics.
Digit 13 Internal use
K=±±20%
Digit 15 Value of the discharge resistor (tolerance±10%)
R.46+R
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
R46
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
REEL Ø500mm 19.05 2 22.5/27.5 CK
Loose, short leads
Loose, long leads
Loose, long leads
04
25
30
00
50
40
Loose, insulated
rigid leads
Loose, insulated
30
150 ±5
51
52
Rated
Cap. (*)
300 Vac / 630 Vdc
Std dimensions Ø d
Max
dv/dt at
390Vdc
(V/ µs)
Part Number
B H L p
0.22 µF 7.0 16.0 26.5 22.5 0.8 200 R463N 3220 - - 01 - -
0.33 µF 8.5 17.0 26.5 22.5 0.8 200 R463N 3330 - - 01 - -
0.47 µF 10.0 18.5 26.5 22.5 0.8 200 R463N 3470 - - 01 - -
0.68 µF 11.0 20.0 26.5 22.5 0.8 200 R463N 3680 - - 01 - -
0.47 µF 11.0 20.0 32.0 27.5 0.8 150 R463R 3470 - - 01 - -
0.68 µF 11.0 20.0 32.0 27.5 0.8 150 R463R 3680 - - M1 - -
1.0 µF 13.0 22.0 32.0 27.5 0.8 150 R463R 4100 - - M1 - -
1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R463R 4150 - - M1 - -
2.2 µF 14.0 28.0 32.0 27.5 0.8 150 R463R 4220 - - M1 - -
3.3 µF 18.0 33.0 32.0 27.5 0.8 150 R463R 4330 - - M2 - -
4.7 µF 22.0 37.0 32.0 27.5 0.8 150 R463R 4470 - - M1 - -
1.5 µF 11.0 22.0 41.5 37.5 1.0 100 R463W 4150 - - M1 - -
2.2 µF 13.0 24.0 41.5 37.5 1.0 100 R463W 4220 - - M1 - -
3.3 µF 16.0 28.5 41.5 37.5 1.0 100 R463W 4330 - - M1 - -
4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R463W 4470 - - M1 - -
6.8 µF 20.0 40.0 41.5 37.5 1.0 100 R463W 4680 - - M2 - -
10.0 µF 24.0 44.0 41.5 37.5 1.0 100 R463W 5100 - - M1 - -
Rated
Cap. (*)
275 Vac / 560 Vdc
Std dimensions Ø d
Max
dv/dt at
390Vdc
(V/ µs)
Part Number
B H L p
0.22 µF 7.0 16.0 26.5 22.5 0.8 200 R46KN 3220 - - 01 - -
0.33 µF 8.5 17.0 26.5 22.5 0.8 200 R46KN 3330 - - 01 - -
0.47 µF 10.0 18.5 26.5 22.5 0.8 200 R46KN 3470 - - 01 - -
0.68 µF 11.0 20.0 26.5 22.5 0.8 200 R46KN 3680 - - 01 - -
0.47 µF 11.0 20.0 32.0 27.5 0.8 150 R46KR 3470 - - 01 - -
0.68 µF 11.0 20.0 32.0 27.5 0.8 150 R46KR 3680 - - M1 - -
1.0 µF 13.0 22.0 32.0 27.5 0.8 150 R46KR 4100 - - M1 - -
1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R46KR 4150 - - M1 - -
2.2 µF 14.0 28.0 32.0 27.5 0.8 150 R46KR 4220 - - M1 - -
3.3 µF 18.0 33.0 32.0 27.5 0.8 150 R46KR 4330 - - M2 - -
4.7 µF 22.0 37.0 32.0 27.5 0.8 150 R46KR 4470 - - M1 - -
1.5 µF 11.0 22.0 41.5 37.5 1.0 100 R46KW 4150 - - M1 - -
2.2 µF 13.0 24.0 41.5 37.5 1.0 100 R46KW 4220 - - M1 - -
3.3 µF 16.0 28.5 41.5 37.5 1.0 100 R46KW 4330 - - M1 - -
4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R46KW 4470 - - M1 - -
6.8 µF 20.0 40.0 41.5 37.5 1.0 100 R46KW 4680 - - M2 - -
10.0 µF 24.0 44.0 41.5 37.5 1.0 100 R46KW 5100 - - M1 - -
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Value of discharge resistor (Table 2)
Rated voltage (3=300Vac)
Mechanical version and packaging (Table 1)
Value of discharge resistor (Table 2)
Table 2
R code (-)
470 kΩE
680 kΩF
1 MΩ
1.2 MΩ L
1.5 MΩ N
2.2 MΩ P
3.3 MΩ
4.7 MΩ S
6.8 MΩ T
10 MΩ V
All dimensions are in mm
