Teccor(R) brand Thyristors 6 Amp Sensitive & Standard SCRs Sxx06xSx & Sxx06x Series (R) Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microAmps of current as furnished by sense coils, proximity switches, and microprocessors. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. Features & Benefits * RoHS compliant * Glass - passivated junctions Agency Approval Agency Agency File Number Typical applications are capacitive discharge systems for strobe lights, nailers, staplers and gas engine ignition. Also controls for power tools, home/brown goods and white goods appliances. Main Features Symbol IT(RMS) VDRM /VRRM IGT * Surge capability up to 100 A Applications L Package: E71639 (R) * Voltage capability up to 1000 V Value Unit 6 A 400 to 1000 V 0.2 to 15 mA Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Schematic Symbol A K G Sxx06xSx & Sxx06x Series 217 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 6 Amp Sensitive & Standard SCRs Absolute Maximum Ratings -- Sensitive SCRs Symbol Parameter IT(RMS) IT(AV) Test Conditions Sxx06LSy TC = 80C RMS on-state current Sxx06RSy Sxx06DSy Sxx06VSy TC = 95C Sxx06LSy TC = 80C Average on-state current Sxx06RSy Sxx06DSy Sxx06VSy TC = 95C Value Unit 6 A 3.8 A single half cycle; f = 50Hz; TJ (initial) = 25C 83 single half cycle; f = 60Hz; TJ (initial) = 25C 100 ITSM Peak non-repetitive surge current I 2t I2t Value for fusing tp = 8.3 ms 41 A2s A di/dt Critical rate of rise of on-state current f = 60Hz; TJ = 110C 100 A/s IGTM Peak gate current TJ = 110C 1 A PG(AV) Average gate power dissipation TJ = 110C 0.1 W Storage temperature range -40 to 150 C Operating junction temperature range -40 to 110 C Value Unit 6 A 3.8 A Tstg TJ Note: xx = voltage, y = sensitivity Absolute Maximum Ratings -- Standard SCRs Symbol IT(RMS) IT(AV) Parameter RMS on-state current Average on-state current Sxx06L TC = 100C Sxx06R Sxx06D Sxx06V TC = 110C Sxx06L TC = 100C Sxx06R Sxx06D Sxx06V TC = 110C single half cycle; f = 50Hz; TJ (initial) = 25C 83 single half cycle; f = 60Hz; TJ (initial) = 25C 100 A ITSM Peak non-repetitive surge current I2t I2t value for fusing tp = 8.3 ms 41 A 2s di/dt Critical rate-of-rise of on-state current f = 60Hz; TJ =125C 100 A/s IGTM Peak gate current TJ = 125C 2 A PG(AV) Average gate power dissipation TJ = 125C 0.5 W Storage temperature range -40 to 150 C Operating junction temperature range -40 to 125 C Tstg TJ Note: xx = voltage Sxx06xSx & Sxx06x Series 218 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 6 Amp Sensitive & Standard SCRs Electrical Characteristics (TJ = 25C, unless otherwise specified) -- Sensitive SCRs Symbol IGT Value Test Conditions Sxx06xS2 Sxx06xS3 200 500 MAX. VD = 6V RL = 100 Unit A MAX. 0.8 V dv/dt VD = VDRM; RGK = 1k; TJ = 110C TYP. 8 V/s VGD VD = VDRM RL = 3.3 k TJ = 110C MIN. 0.2 V VGRM IGR = 10A MIN. IH IT = 20mA (initial) MAX. 6 8 tq IT = 2A; tp= 50s; dv/dt=5V/s; di/dt=-30A/s MAX. 50 45 s tgt IG = 2 x IGT PW = 15s IT = 12A TYP. 4 5 s VGT 6 V mA Note: xx = voltage, x = package Electrical Characteristics (TJ = 25C, unless otherwise specified) -- Standard SCRs Symbol IGT VGT Test Conditions MAX. VD = 12V RL = 60 MAX. VD = VDRM; gate open; TJ = 100C 350 600V 300 1000V VD = VDRM; gate open; TJ = 125C 1.5 400V 800V dv/dt Value Sxx06x 15 Unit mA V 250 MIN. 100 400V 250 600V 225 800V V/s 200 VGD VD = VDRM RL = 3.3 k TJ = 125C MIN. 0.2 V IH IT = 200mA (initial) MAX. 30 mA tq IT = 2A; tp= 50s; dv/dt=5V/s; di/dt=-30A/s MAX. 35 s tgt IG = 2 x IGT PW = 15s IT = 12A TYP. 2 s Note: xx = voltage, x = package Sxx06xSx & Sxx06x Series 219 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 6 Amp Sensitive & Standard SCRs Static Characteristics Symbol Test Conditions IT = 12A; tp = 380 s VTM Sxx06xyy IDRM / IRRM Sxx06x Unit 1.6 V TJ = 25C 400 - 600V 5 TJ = 110C 400 - 600V 250 400 - 800V 10 TJ = 25C VDRM = VRRM MAX. Value TJ = 100C TJ = 125C MAX. 1000V A 20 400 - 800V 200 1000V 3000 400 - 800V 500 Note: xx = voltage, x = package, yy = sensitivity Thermal Resistances Symbol R(J-C) R(J-A) Parameter Junction to case (AC) Junction to ambient Value Sxx06RSy 2.6 Sxx06LSy 4.3 Sxx06VSy 2.4 Sxx06DSy 1.8 Sxx06R 2.5 Sxx06L 4.0 Sxx06V 2.3 Sxx06D 1.7 Sxx06RSy 40 Sxx06LSy 65 Sxx06VSy 85 Sxx06R 40 Sxx06L 50 Sxx06V 70 Unit C/W C/W Note: xx = voltage, y = sensitivity Sxx06xSx & Sxx06x Series 220 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 6 Amp Sensitive & Standard SCRs Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature (Sensitive SCR) Figure 2: N ormalized DC Gate Trigger Current vs. Junction Temperature (Standard SCR) 4.0 Ratio of IGT / IGT (TJ = 25C) Ratio of IGT /IGT (TJ=25C) 4.0 3.0 2.0 3.0 2.0 1.0 1.0 0.0 0.0 -15 -4 10 85 60 35 -40 -15 110 110 125 110 125 Figure 4: N ormalized DC Holding Current vs. Junction Temperature 2.0 Ratio of IH / IH (TJ = 25C) 2.0 Ratio of VGT / VGT (TJ = 25C) 85 60 Junction Temperature (TJ) - (C) Junction Temperature (TJ) - (C) Figure 3: Normalized DC Gate Trigger Voltage vs. Junction Temperature 35 10 1.5 1.0 0.5 0.0 -40 -15 60 35 10 110 85 125 1.5 1.0 0.5 0.0 -40 -15 Junction Temperature (TJ) - (C) 35 10 85 60 Junction Temperature (TJ) - (C) Figure 5: On-State Current vs. On-State Voltage (Typical) Figure 6: P ower Dissipation (Typical) vs. RMS On-State Current 6 30 TJ= 25C 5 Average On-State Power Dissipation [PD(AV)] - (Watts) Instantaneous On-State Current (iT) -Amps 25 20 15 10 5 4 3 2 1 0 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.6 1.5 Instantaneous On-State Voltage (vT) - Volts Sxx06xSx & Sxx06x Series 0 0 1 2 3 4 5 RMS On-State Current [IT(RMS)] - (Amps) 221 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 6 Teccor(R) brand Thyristors 6 Amp Sensitive & Standard SCRs Figure 7: Maximum Allowable Case Temperature vs. RMS On-State Current Figure 8: M aximum Allowable Case Temperature vs. Average On-State Current 130 130 Sxx06R Sxx06D Sxx06V 120 115 Sxx06RSy Sxx06DSy 110 Sxx06L 105 100 95 90 Sxx06LSy CURRENT WAVEFORM: Sinsuoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 FREE AIR RATING 85 120 1 2 Sxx06RSy Sxx06DSy Sxx06VSy 115 110 Sxx06L 105 100 95 90 CURRENT WAVEFORM: Sinsuoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 FREE AIR RATING 85 80 0 Sxx06R Sxx06D Sxx06V 125 Maximum Allowable Case Temperature (TC) - C Maximum Allowable Case Temperature (TC) - C 125 3 4 5 6 80 7 0 1 RMS On-State Current [IT(RMS)] - Amps Sxx06L 80 Sxx06LSy Sxx06RSy 4 Figure 10: Maximum Allowable Ambient Temperature vs. Average On-State Current Maximum Allowable Ambient Temperature (TA) - C Maximum Allowable Temperature (TA) - C 100 3 120 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 FREE AIR RATING Sxx06R 2 Average On-State Current [IT(AVE)] - Amps Figure 9: Maximum Allowable Ambient Temperature vs. RMS On-State Current 120 Sx06LSy Sxx06V 60 40 Sxx06VSy 20 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 FREE AIR RATING Sxx06R 100 80 Sxx06L 60 Sxx06RSy Sxx06LSy Sxx06V 40 Sxx06VSy 20 0 0 0.0 0.5 1.0 1.5 2.0 0.0 2.5 0.5 RMS On-State Current [IT(RMS)] - Amps 1.0 1.5 Average On-State Current [IT(AVE)] - Amps Note: xx = voltage, y = sensitivity Figure 12: P eak Capacitor Discharge Current Derating Figure 11: Peak Capacitor Discharge Current 1.2 Normalized Peak Current Peak Discharge Current (ITM) - Amps 1000 100 ITRM 1.0 0.8 0.6 0.4 Sensitive SCR Standard SCR 0.2 tW 10 0.5 5.0 25.0 50.0 Pulse Current Duration (tw) - ms Sxx06xSx & Sxx06x Series 0.0 0 25 50 75 100 125 Case Temperature (TC) - C 222 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 150 Teccor(R) brand Thyristors 6 Amp Sensitive & Standard SCRs Figure 13: S urge Peak On-State Current vs. Number of Cycles SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Peak Surge (Non-repetitive) On-State Current (ITSM) - AMPS 100 Notes: 1. G ate control may be lost during and immediately following surge current interval. 2. O verload may not be repeated until junction temperature has returned to steady-state rated value. 10 1 1 10 100 1000 Surge Current Duration -- Full Cycles Soldering Parameters Pre Heat Pb - Free assembly - Temperature Min (Ts(min)) 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5C/second max TS(max) to TL - Ramp-up Rate 5C/second max Reflow - Temperature (TL) (Liquidus) 217C - Temperature (tL) 60 - 150 seconds Peak Temperature (TP) 260 Time within 5C of actual peak Temperature (tp) 20 - 40 seconds +0/-5 Ramp-up TL tL TS(max) Preheat TS(min) 25 Ramp-do Ramp-down tS time to peak temperature Time C Ramp-down Rate 5C/second max Time 25C to peak Temperature (TP) 8 minutes Max. Do not exceed 280C Sxx06xSx & Sxx06x Series tP TP Temperature Reflow Condition 223 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 6 Amp Sensitive & Standard SCRs Physical Specifications Environmental Specifications Test Terminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy AC Blocking Temperature Cycling Temperature/ Humidity Design Considerations High Temp Storage Careful selection of the correct device for the application's operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Low-Temp Storage Thermal Shock Autoclave Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40C to +150C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150C 1008 hours; -40C MIL-STD-750, M-1056 10 cycles; 0C to 100C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature EIA / JEDEC, JESD22-A102 168 hours (121C at 2 ATMs) and 100% R/H Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E Product Selector Part Number Voltage 400V 600V 800V 1000V Gate Sensitivity Type Package Sxx06RS2 X X 0.2mA Sensitive SCR TO-220R Sxx06LS2 X X 0.2mA Sensitive SCR TO-220L Sxx06VS2 X X 0.2mA Sensitive SCR TO-251 Sxx06DS2 X X 0.2mA Sensitive SCR TO-252 Sxx06RS3 X X 0.5mA Sensitive SCR TO-220R Sxx06LS3 X X 0.5mA Sensitive SCR TO-220L Sxx06VS3 X X 0.5mA Sensitive SCR TO-251 Sxx06DS3 X X 0.5mA Sensitive SCR TO-252 Sxx06R X X X X 15mA Standard SCR TO-220R Sxx06L X X X X 15mA Standard SCR TO-220L Sxx06V X X X X 15mA Standard SCR TO-251 Sxx06D X X X X 15mA Standard SCR TO-252 Note: xx = voltage Sxx06xSx & Sxx06x Series 224 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 6 Amp Sensitive & Standard SCRs Dimensions -- TO-251AA (V/I-Package) -- V/I-PAK Through Hole TC MEASURING POINT E Anode H D AREA: 0.040 IN2 Dimension 5.28 .208 J A 5.34 .210 B R P Q S K C Cathode L F Anode GATE G I Inches Millimeters Min Typ Max Min Typ Max A 0.040 0.044 0.050 1.02 1.11 1.27 B 0.235 0.242 0.245 5.97 6.15 6.22 C 0.350 0.361 0.375 8.89 9.18 9.53 D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.66 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.34 2.41 I 0.176 0.180 0.184 4.47 4.57 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.038 0.040 0.044 0.97 1.01 1.12 L 0.018 0.020 0.023 0.46 0.52 0.58 P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 R 0.034 0.039 0.044 0.86 1.00 1.11 S 0.074 0.079 0.084 1.86 2.00 2.11 Max Min Dimensions -- TO-252AA (D-Package) -- D-PAK Surface Mount Anode E D 6.71 .264 5.28 .208 TC MEASURING POINT Dimension A 6.71 .264 5.34 .210 B 1.60 .063 P Q C 1.80 .071 GATE F Cathode Anode AREA : 0.040 IN2 3 .118 G 4.60 .181 I O L K J H M N Sxx06xSx & Sxx06x Series 225 Revised: June 24, 2011 04:57 PM Inches Min Typ Millimeters Typ Max A 0.040 0.043 0.050 1.02 1.09 1.27 B 0.235 0.243 0.245 5.97 6.16 6.22 C 0.106 0.108 0.113 2.69 2.74 2.87 D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.65 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.33 2.41 I 0.176 0.179 0.184 4.47 4.55 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.038 0.040 0.044 0.97 1.02 1.12 L 0.018 0.020 0.023 0.46 0.51 0.58 M 0.000 0.000 0.004 0.00 0.00 0.10 N 0.021 0.026 0.027 0.53 0.67 0.69 O 0 0 5 0 0 5 P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 6 Amp Sensitive & Standard SCRs Dimensions -- TO-220AB (R-Package) -- Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT AREA (REF.) 0.17 IN2 O A E Dimension 8.13 .320 P ANODE B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H CATHODE ANODE GATE K N Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). M J Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Min Max Min Max Dimensions -- TO-220AB (L-Package) -- Isolated Mounting Tab TC MEASURING POINT O A E P AREA (REF.) 0.17 IN2 Dimension 8.13 .320 B C 13.36 .526 D 7.01 .276 F R G L H CATHODE ANODE GATE K J Sxx06xSx & Sxx06x Series N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). 226 Revised: June 24, 2011 04:57 PM Inches Millimeters A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 6 Amp Sensitive & Standard SCRs Packing Options Part Number Marking Weight Packing Mode Base Quantity Sxx06L/Ryy Sxx06L/Ryy 2.2 g Bulk 500 Sxx06L/RyyTP Sxx06L/Ryy 2.2 g Tube 500 (50 per tube) Sxx06DyyTP Sxx06Dyy 0.3 g Tube 750 (75 per tube) Sxx06DyyRP Sxx06Dyy 0.3 g Embossed Carrier 2500 Sxx06VyyTP Sxx06Vyy 0.4 g Sxx06L/R Sxx06L/R 2.2 g Bulk 500 Sxx06L/RTP TO-202 Tube Type 1 (F Package) 750 (75 per tube) 2.2 g Tube 500 (50 per tube) Sxx06D 0.3 g Tube 750 (75 per tube) Sxx06DRP Sxx06D 0.3 g Sxx06VTP Sxx06V 0.4 g Tube (R) 2500 yxxxx YMLDD Embossed Carrier S6006F1 TO-251AA - (V Package) TO-252AA - (D Package) 750 (75 per tube) S6006DS2 Sxx06L/R Sxx06DTP Note: xx = Voltage; yy = Sensitivity (R) TO-202 Type 1 (F Package) TO-252 Embossed Carrier Reel Pack (RP) Specs Part Marking System Meets all EIA-481-2 Standards 0.157 (4.0) Gate 0.059 DIA (1.5) TO-251AA - (V Package) TO-252AA - (D Package) Cathode YM * Cover tape 0.315 (8.0) XXXXXX DC XX XXXXXX DC XX XXXXXX DC * XX 0.524 (13.3) (R) (R) 0.63 (16.0) XXXXXX (R) yxxxx S6006DS2 S6006RS2 YMLDD S6006F1 Anode S6006LS2 MY (R) 0.512 (13.0) Arbor Hole Diameter 12.99 (330.0) Dimensions are in inches (and millimeters). S6006RS2 YM (R) Part Numbering System 0.64 (16.3) S 60 06 L S2 56 Direction of Feed DEVICE TYPE S: SCR LEAD FORM DIMENSIONS xx: Lead Form Option S6006LS2 VOLTAGE MY RATING 40: 400V 60: 600V 80: 800V K0: 1000V (R) CURRENT RATING 06: 6A SENSITIVITY & TYPE Sensitive SCR: S2: 200A S3: 500A Standard SCR: (blank): 15mA PACKAGE TYPE L: TO-220 Isolated R: TO-220 Non-Isolated V: TO-251 (V/I-Pak) D: TO-252 (D-Pak) Sxx06xSx & Sxx06x Series 227 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information.