© 2000 Fairchild Semiconductor Corporation DS012141 www.fairchildsemi.com
October 1995
Revised June 2000
NC7S08 TinyLogic
HS 2-Input AND Gate
NC7S08
TinyLogic HS 2-Input AND Gate
General Description
The NC7S08 is a single 2-Input high performance CMOS
AND Gate. Advanced Silicon Gate CMOS fabrication
assures hi gh speed and low po wer cir cuit oper ation ove r a
broad VCC range. ESD protection diodes inherently guard
both inputs and output with respect to the VCC and GND
rails. Three stages of gain between inputs and outputs
assures high noise immunity and reduced sensitivity to
input edge rate.
Features
■Space saving SOT23 or SC70 5-lead package
■High Spee d; tPD 3.5 ns typ
■Low Quiescent Power; ICC < 1 µA
■Balanced Output Drive ; 2 mA IOL, −2 mA IOH
■Broad VCC Operating Range; 2V–6V
■Balanced P rop aga tion Dela ys
■Specified for 3V operation
Ordering Code:
Logic Symbol
IEEE/IEC
Connection Diagram
(Top View)
Pin Descriptions Function Table
H = HIGH Lo gic Level
L = LOW Logic L ev el
TinyLogic is a t radema rk of Fair c hild Sem icond uc tor Co rporat ion.
Order Number Package Product Code Packag e Descript ion Supp lie d As
Numbe r Top Mark
NC7S08M5 MA05B 7S08 5-Lead SOT23, JEDEC MO-178, 1.6mm 250 Units on Tape and Reel
NC7S08M5X MA05B 7S08 5-Lead SOT23, JEDEC MO-178, 1.6mm 3k Units on Tape and Reel
NC7S08P5 MAA05A S08 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 250 Units on Tape and Reel
NC7S08P5X MAA05A S08 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel
Pin Names Descri ption
A, B Inputs
Y Output
Y = AB
Inputs Output
ABY
LLL
LHL
HLL
HHH
www.fairchildsemi.com 2
NC7S08
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions (Note 2)
Note 1: Absolute maximum ratings are those values beyond which damage
to the device may occur. The databook specifications should be met, with-
out exception, to ensure that the system design is reliable over its power
supply, temperatu re, and output /input lo ading variable s. Fairch ild do es not
recomm end operation of c irc uits outsi de datab ook specif ic at ions.
Note 2: Unu s ed inputs m ust be he ld H I GH or LOW. They ma y not fl oat.
DC Electrical Characteristics
Supply Voltage (VCC)−0.5V to +7.0V
DC Input Diode Current (IIK)
@ VIN ≤ −0.5V −20 mA
@ VIN ≥ VCC +0.5V +20 mA
DC Input Voltage (VIN)−0.5V to V CC + 0.5 V
DC Output Diode Current (IOK)
@ VOUT < −0.5V −20 mA
@ VOUT > VCC +0.5V +20 mA
DC Output Voltage (VOUT)−0.5 V to V CC + 0.5 V
DC Output Source
or Sink Current (IOUT)±12.5 mA
DC VCC or Ground Current
per Output Pin (ICC or IGND)±25 mA
Stora ge Tem per atu re (T STG)−65°C to +150°C
Junct ion Tem per atu re (T J) 150°C
Lead Temperature (TL);
(Soldering, 10 second s) 26 0°C
Power Di ssipa ti on (PD) @+85°C
SOT23- 5 200 mW
SC70-5 150 mW
Supply Voltag e (VCC) 2.0V to 6.0V
Input Voltage (VIN) 0V to VCC
Output Voltage (VOUT) 0V to VCC
Operating Temperature (TA)−40°C to +85°C
Input Rise and Fall Time (tr, tf)
VCC @ 2.0V 0 to 1000 ns
VCC @ 3.0V 0 to 750 ns
VCC @ 4.5V 0 to 500 ns
VCC @ 6.0V 0 to 400 ns
Thermal Resistance (θJA)
SOT23-5 300°C/W
SC70-5 425°C/W
Symbol Parameter VCC TA = +25°CT
A = −40°C to +85°CUnits Conditions
(V) Min Typ Max Min Max
VIH HIGH Level Input Voltage 2.0 1.50 1.50 V
3.0-6.0 0.7 VCC 0.7 VCC
VIL LOW Level Input Voltage 2.0 0.50 0.50 V
3.0-6.0 0.3 VCC 0.3 VCC
VOH HIGH Level Output Voltage 2.0 1.90 2.0 1.90
V
3.0 2.90 3.0 2.90 IOH = −20 µA
4.5 4.40 4.5 4.40 VIN = VIH
6.0 5.90 6.0 5.90
V
VIN = VIH
3.0 2.68 2.85 2.63 IOH = −1.3 mA
4.5 4.18 4.35 4.13 IOH = −2 mA
6.0 5.68 5.85 5.63 IOH = −2.6 mA
VOL LOW Level Output Voltage 2.0 0.0 0.10 0.10
V
3.0 0.0 0.10 0.10 IOL = 20 µA
4.5 0.0 0.10 0.10 VIN = VIL
6.0 0.0 0.10 0.10
V
VIN = VIH or VIL
3.0 0.1 0.26 0.33 IOH = 1.3 mA
4.5 0.1 0.26 0.33 IOL = 2 mA
6.0 0.1 0.26 0.33 IOL = 2.6 mA
IIN Input Leakage Current 6.0 ±0.1 ±1.0 µAV
IN = VCC, GND
ICC Quiescent Supply Current 6.0 1.0 10.0 µAV
IN = VCC, GND
3 www.fairchildsemi.com
NC7S08
AC Electrical Characteristics
Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output
loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynam ic operating current by th e ex pression:
ICCD = (CPD)(VCC)(fIN) + (I CCstatic).
AC Loading and Waveforms
CL include s l oad and str ay c apacitan ce
Input PRR = 1.0 MHz; t W = 500 ns
FIGURE 1. AC Test Circuit
Input = AC Wav efo r m;
PRR = variable; D ut y Cycle = 50%
FIGURE 2. ICCD Test Circuit
FIGURE 3. AC Waveforms
Symbol Parameter VCC TA = +25°CT
A = −40°C to +85°CUnits Conditions Fig. No.
(V) Min Typ Max Min Max
tPLH, Propagation Delay 5.0 3.5 15 ns CL = 15 pF
Figures
1, 3
tPHL 2.0 20 100 125
ns CL = 50 pF
3.0 11 27 35
4.5 8 20 25
6.0 7 17 21
tTLH, Output Transition Time 5.0 3.0 10 ns CL = 15 pF
Figures
1, 3
tTHL 2.0 25 125 155
ns CL = 50 pF
3.0 16 35 45
4.5 11 25 31
6.0 9 21 26
CIN Input Capacitance Open 2 10 10 pF
CPD Power Dissipation Capacitance 5.0 6 pF (Note 3) Figure 2
www.fairchildsemi.com 4
NC7S08
Tape and Reel Specification
TAPE FORMAT
TAPE DIMENSIONS inches (millimeters)
Package Tape Number Cavity Cover Tape
Designator Section Cavities Status Status
Leader (Start End) 125 (typ) Empty Sealed
M5, P5 Carrier 250 Filled Sealed
Trailer (Hub End) 75 (typ) Empty Sealed
Leader (Start End) 125 (typ) Empty Sealed
M5X, P5X Carrier 3000 Filled Sealed
Trailer (Hub End) 75 (typ) Empty Sealed
Package Tape Size DIM A DIM B DIM F DIM KoDIM P1 DIM W
SC70-5 8 mm 0.093 0.096 0.138 ± 0.004 0.053 ± 0.004 0.157 0.315 ± 0.004
(2.35) (2.45) (3.5 ± 0.10) (1.35 ± 0.10) (4) (8 ± 0.1)
SOT23-5 8 mm 0.130 0.130 0.138 ± 0.002 0.055 ± 0.004 0.157 0.315 ± 0.012
(3.3) (3.3) (3.5 ± 0.0 5) (1.4 ± 0.11) (4) (8 ± 0.3)
5 www.fairchildsemi.com
NC7S08
Tape and Reel Specification (Continued)
REEL DIMENSIONS inches (millimeters)
Tape
Size ABCDN W1 W2 W3
8 mm 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/−0.000 0.567 W1 + 0.078/−0.039
(177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.5 0/−0.00) (14.40) (W1 + 2.00/−1.00)
www.fairchildsemi.com 6
NC7S08
Physical Dimensions inches (millimeters) unless otherwise noted
5-Lead SOT23, JEDEC MO-178, 1.6mm
Package Number MA05B
7 www.fairchildsemi.com
NC7S08 TinyLogic
HS 2-Input AND Gate
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
Package Number MAA05A
Fairchild does not assume an y responsibility fo r use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life suppor t de vices o r syst ems are dev ic es or syste ms
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instruct ions fo r use pr ovi de d in the l abe ling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A crit ical componen t in any com ponen t of a life s uppor t
device or system whose failure to perform can be rea-
sonabl y e xpec ted to cause th e fa i lure of the l ife s upport
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
