N-CHANNEL ENHANCEMENT
MODE POWER MOSFET
Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice.
Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However
Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to
verify that datasheets are current before placing orders.
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 8382
Issue 1
Page 1 of 4
2N6660C4
VDSS = 60V , ID = 1.0A, RDS(ON) = 3.0
Fast Switching
Low Threshold Voltage (Logic Level)
Low CISS
Integral Source-Drain Body Diode
Hermetic Surface Mounted Package
High Reliability Screening Options Available
ABSOLUTE MAXIMUM RATINGS
(TC = 25°C unless otherwise stated)
VDS Drain – Source Voltage 60V
VGS Gate – Source Voltage ±20V
ID Continuous Drain Current TC = 25°C 1.0A
IDM Pulsed Drain Current
(1)
3.0A
PD Total Power Dissipation at TC 25°C 5W
De-rate TC > 25°C 40mW/°C
PD Total Power Dissipation at TA 25°C 700mW
De-rate TA > 25°C 5.6mW/°C
TJ Operating Temperature Range -65 to +150°C
Tstg Storage Temperature Range -65 to +150°C
THERMAL PROPERTIES
Symbols Parameters Min. Typ. Max. Units
RθJC
Thermal Resistance, Junction To Case 25 °C/W
RθJA
Thermal Resistance, Junction To Ambient 178.5 °C/W
Notes
NotesNotes
Notes
(1) Repetitive Rating: Pulse width limited by maximum junction temperature
(2) Pulse Width 300us, δ 2%
N-CHANNEL ENHANCEMENT
MODE POWER MOSFET
2N6660C4
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 8382
Issue 1
Page 2 of 4
ELECTRICAL CHARACTERISTICS
(TC = 25°C unless otherwise stated)
Symbols Parameters Test Conditions Min.
Typ. Max.
Units
BVDSS Drain-Source Breakdown
Voltage VGS = 0 ID = 1.0µA 60 V
VDS = VGS ID = 1.0mA 0.8 2
TC = 125°C 0.3
VGS(th) Gate Threshold Voltage
TC = -55°C 2.5
V
VGS = ±20V VDS = 0V ±100
IGSS Gate-Source Leakage Current
TC = 125°C ±500
nA
VGS = 0 VDS = 48V 1.0
IDSS Zero Gate Voltage
Drain Current TC = 125°C 100
µA
ID(ON)
(2)
On-State Drain Current VDS = 10V VGS = 10V 1.5 A
VGS = 5V ID = 0.3A 5
VGS = 10V ID = 1.0A 3
RDS(on)
(2)
Static Drain-Source
On-State Resistance
TC = 125°C 5
gfs
(2)
Forward Transconductance VDS = 7.5V ID = 525mA 170 mƱ
VSD
(2)
Body Diode Forward Voltage VGS = 0 IS = 1.0A 0.7 1.6 V
trr
(2)
Body Diode Reverse Recovery VGS = 0 IS = 1.0A 350 ns
DYNAMIC CHARACTERISTICS
Ciss Input Capacitance VGS = 0 50
Coss Output Capacitance VDS = 25V 40
Crss Reverse Transfer Capacitance f = 1.0MHz 10
pF
td(on) Turn-On Delay Time VDD = 25V 10
td(off) Turn-Off Delay Time ID = 1.0A RG = 50 10
ns
N-CHANNEL ENHANCEMENT
MODE POWER MOSFET
2N6660C4
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 8382
Issue 1
Page 3 of 4
MECHANICAL DATA
Dimensions in mm (inches)
C4
Underside View
PACKAGE VARIANT TABLE
Variant Pads Connection
Pads 6, 7, 8, 9, 10, 11, 12, 13 Source
Pads 4, 5 Gate
Pads 1, 2, 15, 16, 17, 18 Drain
A
Pads 3, 14 Not Connected
1.39 (0.055)
1.15 (0.045)
0.76 (0.030)
0.51 (0.020)
1.39 (0.055)
1.02 (0.040)
15 16
13
12 14
34
56
7
17
18
1
2
11
10
8
9
9.14 (0.360)
8.64 (0.340)
1.27 (0.050)
1.07 (0.040) 2.16 (0.085)
7.62 (0.300)
7.12 (0.280)
1.65 (0.065)
1.40 (0.055)
0.33 (0.013)
0.08 (0.003)
0.43 (0.017)
0.18 (0.007
Rad.
Rad.
N-CHANNEL ENHANCEMENT
MODE POWER MOSFET
2N6660C4
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 8382
Issue 1
Page 4 of 4
SCREENING OPTIONS
Space Level (JQRS/ESA) and High Reliability options are
available in accordance with the High Reliability and
Screening Options Handbook available for download from
the from the TT electronics Semelab web site.
ESA Quality Level Products are based on the testing
procedures specified in the generic ESCC 5000 and in the
corresponding part detail specifications.
Semelabs QR216 and QR217 processing specifications
(JQRS), in conjunction with the companies ISO 9001:2000
approval present a viable alternative to the American MIL-
PRF-19500 space level processing.
QR217 (Space Level Quality Conformance) is based on the
quality conformance inspection requirements of MIL-PRF-
19500 groups A (table V), B (table VIa), C (table VII) and
also ESA / ESCC 5000 (chart F4) lot validation tests.
QR216 (Space Level Screening) is based on the screening
requirements of MIL-PRF-19500 (table IV) and also ESA
/ESCC 5000 (chart F3).
JQRS parts are processed to the device data sheet and
screened to QR216 with conformance testing to Q217
groups A and B in accordance with MIL-STD-750 methods
and procedures.
Additional conformance options are available, for example
Pre-Cap Visual Inspection, Buy-Off Visit or Data Packs.
These are chargeable and must be specified at the order
stage (See Ordering Information). Minimum order
quantities may apply.
Alternative or additional customer specific conformance or
screening requirements would be considered. Contact
Semelab sales with enquires.
MARKING DETAILS
Parts are typically marked with specification number, serial
number (or week of seal) as shown in the example below. .
Customer specific marking requirements can be arranged at
time of order but is approximately limited to three lines of
10 Characters. This is to ensure text remains readable.
Example Marking:
ORDERING INFORMATION
Part number is built from part, package variant and
screening level. The part number can be extended to
include the additional options as shown below.
Type – See Electrical Stability Characteristics Table
Package Variant – See Mechanical Data
Screening Level – See Screening Options (ESA / JQRS)
Additional Options:
Customer Pre-Cap Visual Inspection .CVP
Customer Buy-Off visit .CVB
Data Pack .DA
Solderability Samples .SS
Scanning Electron Microscopy .SEM
Radiography (X-ray) .XRAY
Total Dose Radiation Test .RAD
MIL-PRF-19500 (QR217)
Group B charge .GRPB
Group B destructive mechanical samples .GBDM (12 pieces)
Group C charge .GRPC
Group C destructive electrical samples .GCDE (12 pieces)
Group C destructive mechanical samples .GCDM (6 pieces)
ESA/ESCC
Lot Validation Testing (subgroup 1) charge .LVT1
LVT1 destructive samples (environmental) .L1DE (15 pieces)
LVT1 destructive samples (mechanical) .L1DM (15 pieces)
Lot Validation Testing (subgroup 2) charge .LVT2
LVT2 endurance samples (electrical) .L2D (15 pieces)
Lot Validation Testing (subgroup 3) charge .LVT3
LVT3 destructive samples (mechanical) .L3D (5 pieces)
Additional Option Notes:
1) All ‘Additional Options’ are chargeable and must be specified at order stage.
2) When Group B,C or LVT is required, additional electrical and mechanical destructive
samples must be ordered
3) All destructive samples are marked the same as other production parts unless
otherwise requested.
Example ordering information:
The following example is for the 2N6660C4 part, package
variant A, JQRS screening, additional Group C conformance
testing and a Data pack.
Part Numbers:
2N6660C4A-JQRS
(Include quantity for flight parts)
2N6660C4A-JQRS.GRPC
(chargeable conformance option)
2N6660C4A-JQRS.GCDE
(charge for destructive parts)
2N6660C4A-JQRS.GCDM
(charge for destructive parts)
2N6660C4A-JQRS.DA
(charge for Data pack)
Customers with any specific requirements (e.g. marking,
package or screening) may be supplied with a similar
alternative part number (there is maximum 20 character
limit to part numbers). Contact Semelab sales with all
enquiries