2N5038 - ON Semiconductor - Datasheet.Directory

NPN Silicon Transistors

. . . fast switching speeds and high current capacity ideally suit these

parts for use in switching regulators, inverters, wide−band amplifiers

and power oscillators in industrial and commercial applications.

•High Speed − tf = 0.5 μs (Max)

•High Current − IC(max) = 30 Amps

•Low Saturation − VCE(sat) = 2.5 V (Max) @ IC = 20 Amps

wThis device is available in Pb−free package(s). Specifications herein

apply to both standard and Pb−free devices. Please see our website at

www.onsemi.com for specific Pb−free orderable part numbers, or

contact your local ON Semiconductor sales office or representative.

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

*MAXIMUM RATINGS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Rating

ÎÎÎÎÎÎ

Symbol

ÎÎÎÎÎÎÎÎÎÎ

Value

ÎÎÎÎ

Unit

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector−Base Voltage

ÎÎÎÎÎÎ

VCBO

ÎÎÎÎÎÎÎÎÎÎ

150

ÎÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector−Emitter Voltage

ÎÎÎÎÎÎ

VCEV

ÎÎÎÎÎÎÎÎÎÎ

150

ÎÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Emitter−Base Voltage

ÎÎÎÎÎÎ

VEBO

ÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector Current −Continuous

Peak (1)

ÎÎÎÎÎÎ

ICM

ÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎ

Adc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Base Current − Continuous

ÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎ

Adc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Total Device Dissipation @ TC = 25_C

Derate above 25_C

ÎÎÎÎÎÎ

ÎÎÎÎ

ÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎ

140

0.8

ÎÎÎÎ

ÎÎ

ÎÎÎÎ

Watts

W/_C

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Operating and Storage Junction Temperature Range

ÎÎÎÎÎÎ

TJ, Tstg

ÎÎÎÎÎÎÎÎÎÎ

–65 to +200

ÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

THERMAL CHARACTERISTICS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Characteristic

ÎÎÎÎÎÎÎ

Symbol

ÎÎÎÎÎÎÎÎ

Max

ÎÎÎÎ

Unit

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Thermal Resistance, Junction to Case

ÎÎÎÎÎÎÎ

RθJC

ÎÎÎÎÎÎÎÎ

1.25

ÎÎÎÎ

_C/W

*Indicates JEDEC Registered Data.

(1) Pulse Test: Pulse Width v 10 ms, Duty Cycle v 50%.

Figure 1. Switching Time Test Circuit

+11 V 10 Ω

−5 V

1N4933

VCC

2.5

IC = 12 AMPS

IB1 = IB2 = 1.2 AMPS

−9 V

2N5038

+30 V

PW = 20 μs

DUTY CYCLE = 1%

IC = 10 AMPS

IB1 = IB2 = 1.0 AMPS

2N5039

ON Semiconductort

March, 2006 − Rev. 11

1Publication Order Number:

2N5038/D

2N5038

20 AMPERE

NPN SILICON

POWER TRANSISTOR

90 VOLTS

140 WATTS

CASE 1−07

TO−204AA

(TO−3)

2N5038

http://onsemi.com

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

*ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted)

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Characteristic

ÎÎÎÎÎ

Symbol

ÎÎÎ

Min

ÎÎÎÎ

Max

ÎÎÎ

Unit

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

OFF CHARACTERISTICS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector−Emitter Sustaining Voltage (2)

(IC = 200 mAdc, IB = 0)

ÎÎÎÎÎ

ÎÎÎ

ÎÎÎÎÎ

VCEO(sus)

ÎÎÎ

ÎÎÎÎ

ÎÎ

ÎÎÎÎ

−

ÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector Cutoff Current

(VCE = 140 Vdc, VBE(off) = 1.5 V)

(VCE = 100 Vdc, VBE(off) = 1.5 Vdc, TC = 150_C)

ÎÎÎÎÎ

ÎÎÎ

ÎÎÎÎÎ

ICEX

ÎÎÎ

−

ÎÎÎÎ

ÎÎ

ÎÎÎÎ

ÎÎÎ

mAdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Emitter Cutoff Current

(VEB = 5 Vdc, IC = 0)

(VEB = 7 Vdc, IC = 0)

ÎÎÎÎÎ

ÎÎÎ

ÎÎÎÎÎ

IEBO

ÎÎÎ

−

ÎÎÎÎ

ÎÎ

ÎÎÎÎ

ÎÎÎ

mAdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ON CHARACTERISTICS (2)

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

DC Current Gain

(IC = 12 Adc, VCE = 5 Vdc)

ÎÎÎÎÎ

ÎÎÎ

ÎÎÎÎÎ

hFE

ÎÎÎ

ÎÎÎÎ

ÎÎ

ÎÎÎÎ

100

ÎÎÎ

−

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Collector−Emitter Saturation Voltage

(IC = 20 Adc, IB = 5 Adc)

ÎÎÎÎÎ

ÎÎÎ

ÎÎÎÎÎ

VCE(sat)

ÎÎÎ

−

ÎÎÎÎ

ÎÎ

ÎÎÎÎ

2.5

ÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Base−Emitter Saturation Voltage

(IC = 20 Adc, IB = 5 Adc)

ÎÎÎÎÎ

VBE(sat)

ÎÎÎ

−

ÎÎÎÎ

3.3

ÎÎÎ

Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

DYNAMIC CHARACTERISTICS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Magnitude of Common−Emitter Small−Signal Short−Circuit

Forward Current Transfer Ratio

(IC = 2 Adc, VCE = 10 Vdc, f = 5 MHz)

ÎÎÎÎÎ

ÎÎÎ

|hfe|

ÎÎÎ

ÎÎÎÎ

ÎÎ

−

ÎÎÎ

−

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

SWITCHING CHARACTERISTICS

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

RESISTIVE LOAD

ÎÎÎÎÎÎÎ

Rise Time

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

(VCC = 30 Vdc)

ÎÎÎÎÎ

ÎÎÎ

−

ÎÎÎÎ

0.5

ÎÎÎ

μs

ÎÎÎÎÎÎÎ

Storage Time

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

(IC = 12 Adc, IB1 = IB2 = 1.2 Adc)

ÎÎÎÎÎ

ÎÎÎ

−

ÎÎÎÎ

1.5

ÎÎÎ

μs

*Indicates JEDEC Registered Data.

(2) Pulse Test: Pulse Width v 300, μs, Duty Cycle v 2%.

100

Figure 2. Forward Bias Safe Operating Area

VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS)

0.1 1 10 100

BONDING WIRE LIMIT

THERMAL LIMIT

SECOND BREAKDOWN LIMIT

IC, COLLECTOR CURRENT (AMPS)

0.5

0.2

2 3 5 7 20 30 50

TC = 25°C

There are two limitations on the power handling ability of

a transistor: average junction temperature and second

breakdown. Safe operating area curves indicate IC − VCE

limits of the transistor that must be observed for reliable

operation; i.e., the transistor must not be subjected to greater

dissipation than the curves indicate.

Second breakdown pulse limits are valid for duty cycles

to 10%. At high case temperatures, thermal limitations may

reduce the power that can be handled to values less than the

limitations imposed by second breakdown.

2N5038

http://onsemi.com

PACKAGE DIMENSIONS

CASE 1−07

TO−204AA (TO−3)

ISSUE Z

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. ALL RULES AND NOTES ASSOCIATED WITH

REFERENCED TO−204AA OUTLINE SHALL APPLY.

DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A1.550 REF 39.37 REF

B−−− 1.050 −−− 26.67

C0.250 0.335 6.35 8.51

D0.038 0.043 0.97 1.09

E0.055 0.070 1.40 1.77

G0.430 BSC 10.92 BSC

H0.215 BSC 5.46 BSC

K0.440 0.480 11.18 12.19

L0.665 BSC 16.89 BSC

N−−− 0.830 −−− 21.08

Q0.151 0.165 3.84 4.19

U1.187 BSC 30.15 BSC

V0.131 0.188 3.33 4.77

−T−SEATING

PLANE

2 PLD

0.13 (0.005) Y M

0.13 (0.005) T

−Q−

−Y−

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Japan: ON Semiconductor, Japan Customer Focus Center

2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051

Phone: 81−3−5773−3850

2N5038/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 61312, Phoenix, Arizona 85082−1312 USA

Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada

Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: http://onsemi.com

Order Literature: http://www.onsemi.com/litorder

For additional information, please contact your

local Sales Representative.