260 CLA-V www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability FEATURES * Useful life: up to 2000 h at 150 C * High reliability * Low ESR * Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing * SMD-version with base plate, lead (Pb)-free reflow solderable 160 CLA 150 C high vibration 260 CLA-V * High temperature reflow soldering according to JEDEC(R) J-STD-020 higher temperature 140 CRH 125 C lower Z higher IR * High temperature proof 146 CTI 125 C * Vibration proof, 6-pin version up to 30 g lower Z * AEC-Q200 qualified * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 150 CRZ 105 C Fig. 1 APPLICATIONS * SMD technology, for high temperature reflow soldering QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR VALUE 16 x 16 x 16 to 18 x 18 x 21 20 % 16 V to 80 V -55 C to +150 C Endurance test at 150 C 1000 h to 1500 h Useful life at 150 C 1500 h to 2000 h Useful life at 40 C 1.8 x lR applied 300 000 h to 400 000 h Based on sectional specification Climatic category IEC 60068 Revision: 12-Apr-17 * High temperature environment, high peak load * Automotive, industrial * Smoothing, filtering, buffering 150 F to 3300 F Category temperature range Shelf life at 0 V, 150 C * Charge and discharge proof, no peak current limitation 1000 h IEC 60384-18 / CECC 32300 55 / 150 / 56 MARKING * Rated capacitance (in F) * Rated voltage (in V) * Date code, in accordance with IEC 60062 * Black mark or "-" sign indicating the cathode (the anode is identified by beveled edges) * Code indicating group number (A) PACKAGING Supplied in blister tape on reel Document Number: 28426 1 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 260 CLA-V www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) UR (V) 16 25 35 50 63 80 150 16 x 16 x 16 220 16 x 16 x 16 18 x 18 x 16 330 16 x 16 x 16 18 x 18 x 16 18 x 18 x 21 470 16 x 16 x 16 18 x 18 x 16 16 x 16 x 21 - 680 16 x 16 x 16 18 x 18 x 16 16 x 16 x 21 18 x 18 x 21 - 1000 16 x 16 x 16 18 x 18 x 16 16 x 16 x 21 18 x 18 x 21 - - 1500 18 x 18 x 16 16 x 16 x 21 18 x 18 x 21 - - - 2200 16 x 16 x 21 18 x 18 x 21 - - - - 2700 18 x 18 x 21 - - - - - 3300 18 x 18 x 21 - - - - - 6-pin: O 16 mm 35V 1000u H4E A min. 0.4 / max. 1.0 (2 x) CR (F) HMAX. max. 0.3 D WMAX. B L1MAX. S LMAX. Fig. 1 - Dimensional outline Table 1 DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE LxWxH CASE CODE LMAX. WMAX. HMAX. OD BMAX. S L1MAX. MASS (g) 16 x 16 x 16 1616 16.6 16.6 17.5 16.0 1.3 6.5 18.6 5.8 16 x 16 x 21 1621 16.6 16.6 22.0 16.0 1.3 6.5 18.6 7.1 18 x 18 x 16 1816 19.0 19.0 17.5 18.0 1.3 6.5 21.0 8.0 18 x 18 x 21 1821 19.0 19.0 22.0 18.0 1.3 6.5 21.0 9.3 Revision: 12-Apr-17 Document Number: 28426 2 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 260 CLA-V www.vishay.com Vishay BCcomponents Table 2 TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES NOMINAL CASE SIZE LxWxH CASE CODE PITCH P1 TAPE WIDTH W TAPE THICKNESS T2 REEL DIAMETER PACKAGING QUANTITY PER REEL 16 x 16 x 16 1616 28 44 18.9 380 150 16 x 16 x 21 1621 28 44 23.4 380 100 18 x 18 x 16 1816 32 44 18.9 380 125 18 x 18 x 21 1821 32 44 23.4 380 100 Note * Detailed tape dimensions see section "PACKAGING" MOUNTING SOLDERING The capacitors are designed for automatic placement on to printed-circuit boards. Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the component during processing. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print layout and / or adjacent components. For maximum conditions refer to Fig. 4. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. For recommended soldering pad dimensions, refer to Fig. 3 and Table 3. a As a general principle, temperature and duration shall be the minimum necessary required to ensure good soldering connections. However, the specified maximum curves should never be exceeded. c a b Case size O D 16 mm Fig. 2 - Recommended soldering pad dimensions Table 3 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters CASE CODE a b c 1616 7.8 9.6 4.7 1621 7.8 9.6 4.7 1816 8.8 9.6 4.7 1821 8.8 9.6 4.7 Revision: 12-Apr-17 Document Number: 28426 3 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 260 CLA-V www.vishay.com Vishay BCcomponents ADVANCED SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS ACCORDING TO JEDEC J-STD-020 T (C) TPeak 230 217 t4 t3 200 190 t2 150 t1 25 time (s) Fig. 3 - Maximum temperature load during reflow soldering Table 4 REFLOW SOLDERING CONDITIONS for MAL226099xxxE3 PROFILE FEATURES CASE CODE 1616 TO 1821 Maximum time from 25 C to TPeak 300 s Maximum ramp-up rate to 150 C 3 K/s Maximum time from 150 C to 200 C (t1) 150 s Maximum time from 190 C to 200 C (t2) 110 s Ramp up rate from 200 C to TPeak 0.5 K/s to 3 K/s Maximum time above TLiquidus (217 C) (t3) 90 s Maximum time above 230 C (t4) 60 s Peak temperature TPeak Maximum time above TPeak minus 5 C Ramp-down rate from TLiquidus 245 C 30 s 3 K/s to 6 K/s Notes * Temperature measuring point on top of the case and on terminals. * Maximum 2 runs with pause of minimum 30 min in between. Revision: 12-Apr-17 Document Number: 28426 4 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 260 CLA-V www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA Electrolytic capacitor 260 CLA-V series SYMBOL DESCRIPTION CR Rated capacitance at 100 Hz, tolerance 20 % IR Rated RMS ripple current at 100 kHz, 150 C IL2 Maximum leakage current after 2 min at UR tan Z 330 F / 50 V; 20 % Nominal case size: 16 mm x 16 mm x 16 mm; taped on reel Ordering code: MAL226099104E3 Maximum dissipation factor at 100 Hz Maximum impedance at 100 kHz Note * Unless otherwise specified, all electrical values in Table 5 apply at Tamb = 20 C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Table 5 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 16 25 35 50 63 80 CR (F) NOMINAL CASE SIZE LxWxH (mm) IR 150 C 100 kHz (mA) IL2 2 min (A) tan 100 Hz Z 100 kHz 20 C () Z 100 kHz -40 C () LIFE CODE (1) ORDERING CODE MAL2260... 1000 16 x 16 x 16 850 160 0.16 0.050 0.45 L1 99503E3 1500 18 x 18 x 16 900 240 0.16 0.050 0.45 L1 99504E3 2200 16 x 16 x 21 1100 352 0.18 0.035 0.32 L3 99505E3 2700 18 x 18 x 21 1350 432 0.18 0.035 0.32 L3 99506E3 3300 18 x 18 x 21 1400 528 0.20 0.035 0.32 L3 99507E3 680 16 x 16 x 16 800 170 0.14 0.050 0.45 L1 99603E3 1000 18 x 18 x 16 830 250 0.14 0.050 0.45 L1 99604E3 1500 16 x 16 x 21 1050 375 0.14 0.035 0.32 L3 99605E3 2200 18 x 18 x 21 1350 550 0.16 0.035 0.32 L3 99606E3 470 16 x 16 x 16 800 165 0.12 0.050 0.45 L1 99003E3 680 18 x 18 x 16 830 238 0.12 0.050 0.45 L1 99004E3 1000 16 x 16 x 21 1000 350 0.12 0.035 0.32 L3 99005E3 1500 18 x 18 x 21 1350 525 0.12 0.035 0.32 L3 99006E3 330 16 x 16 x 16 700 165 0.10 0.072 0.65 L1 99104E3 470 18 x 18 x 16 720 235 0.10 0.070 0.63 L1 99105E3 680 16 x 16 x 21 800 340 0.10 0.052 0.47 L3 99106E3 1000 18 x 18 x 21 1100 500 0.10 0.049 0.44 L3 99107E3 220 16 x 16 x 16 500 139 0.10 0.100 0.90 L1 99805E3 330 18 x 18 x 16 520 208 0.10 0.095 0.86 L1 99806E3 470 16 x 16 x 21 600 296 0.10 0.075 0.68 L3 99807E3 680 18 x 18 x 21 700 428 0.10 0.072 0.65 L3 99808E3 150 16 x 16 x 16 430 120 0.12 0.390 3.12 L1 99703E3 220 18 x 18 x 16 430 176 0.12 0.390 3.12 L1 99704E3 330 18 x 18 x 21 520 264 0.12 0.300 2.40 L2 99705E3 Note (1) Determines the applicable row in the table "Endurance Test Duration and Useful Life" Revision: 12-Apr-17 Document Number: 28426 5 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 260 CLA-V www.vishay.com Vishay BCcomponents Table 6 EXTENDED VIBRATION SPECIFICATIONS PARAMETER PROCEDURE Vibration improvement From 10 g to 30 g Vibration frequency range 10 Hz to 2 kHz Vibration profile * Constant sinus sweep * 3 directions * 8 h per direction REQUIREMENTS No visible damage; no leakage of electrolyte; marking legible C/C: 5 % with respect to initial measurements 60 Acceleration (g) 50 40 30 Improved SMD 20 Vishay extended 10 AEC-Q200 0 0 0.5 1 1.5 2.0 f (kHz) Fig. 4 - Vibration profile Table 7 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE IEC 60384-18, subclause 4.14 Us 1.15 x UR IEC 60384-18, subclause 4.16; TA 150 C Urev 1 V After 2 min at UR IL2 0.01 x CR x UR O D 16 mm Typ. 11 nH Calculated from tan max. and CR (see Table 5) ESR = tan /2fCR Voltage Surge voltage for short periods Reverse voltage for short periods Current Leakage current Inductance Equivalent series inductance (ESL) Resistance Equivalent series resistance (ESR) at 100 Hz Revision: 12-Apr-17 Document Number: 28426 6 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 260 CLA-V www.vishay.com Vishay BCcomponents CAPACITANCE (C) 1.20 1.10 C/C0 C/C0 1.00 1.10 0.90 1.00 0.80 0.70 2700 F 0.90 0.60 0.80 1000 F 0.50 -60 -40 -20 0 20 40 60 80 100 120 140 160 Tamb (C) C0 = Capacitance at 20 C, 100 Hz 102 10 103 104 f (Hz) C0 = Typical capacitance C at 20 C, 100 Hz Fig. 5 - Typical multiplier of capacitance as a function of ambient temperature 105 Fig. 6 - Typical multiplier of capacitance as a function of frequency DISSIPATION FACTOR (tan ) 103 8 tan/tan0 tan/tan0 6 102 4 10 2 1 0 0.1 -60 -40 -20 0 20 40 60 80 tan = Typical tan at 20 C, 100 Hz 100 120 140 160 102 10 103 tan = Typical tan at 20 C, 100 Hz Tamb (C) Fig. 7 - Typical multiplier of dissipation factor (tan ) as a function of ambient temperature 104 105 f (Hz) Fig. 8 - Typical multiplier of dissipation factor (tan ) as a function of frequency EQUIVALENT SERIES RESISTANCE (ESR) 10 ESR/ESR0 1 0.1 10 10 2 ESR0 = Typical ESR at 20 C, 100 Hz 10 3 10 4 10 f (Hz) Tamb = 20 C 5 Fig. 9 - Typical multiplier of ESR as a function of frequency Revision: 12-Apr-17 Document Number: 28426 7 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 260 CLA-V www.vishay.com Vishay BCcomponents IMPEDANCE (Z) 102 Z/Z0 10 1 0.1 -60 -40 -20 0 20 40 60 80 100 120 140 160 T (C) Z0 = Typical impedance Z at 20 C, 100 kHz Fig. 10 - Typical multiplier of impedance as a function of temperature 102 103 Curve 1: 680-25-1616 Curve 2: 1000-25-1816 Curve 3: 1500-25-1621 Curve 4: 2200-25-1821 Z () 10 1 2 3 4 1 Curve 1: 330-50-1616 Curve 2: 470-50-1816 Curve 3: 680-50-1621 Curve 4: 1000-50-1821 Z () 102 1 2 3 4 10 1 0.1 0.1 0.01 0.01 102 10 103 104 105 Tamb = 20 C 102 10 f (Hz) Fig. 11 - Typical impedance as a function of frequency 103 104 Tamb = 20 C 105 f (Hz) Fig. 12 - Typical impedance as a function of frequency RIPPLE CURRENT AND USEFUL LIFE Table 8 ENDURANCE TEST DURATION AND USEFUL LIFE LIFE CODE ENDURANCE AT 150 C (h) USEFUL LIFE AT 150 C (h) USEFUL LIFE AT 40 C 1.8 x IR APPLIED (h) L1 1000 1500 350 000 L2 1500 1500 350 000 L3 1500 2000 400 000 Note * Multiplier of useful life code: MBC245 Revision: 12-Apr-17 Document Number: 28426 8 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 260 CLA-V www.vishay.com Vishay BCcomponents MBC245 IA 4.8 IR 4.5 4.3 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 Lifetime multiplier 0 1. 3.2 3.1 3.0 5 1. 0 2. 2. 5 2.8 0 4. 0 8. 12 2.4 20 2.2 30 2.0 50 0 0 20 40 0 (1) 0 60 1.6 1.4 1.2 1.0 0.8 0.5 0.0 10 1.8 IA = Actual ripple current at 100 kHz IR = Rated ripple current at 100 kHz, 150 C (1) Useful life at 150 C and IR applied; see Table 7 0 6. 2.6 40 50 60 70 80 90 100 110 120 130 140 150 160 Tamb (C) Fig. 13 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 9 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) 50 100 300 1000 3000 10 000 30 000 100 000 0.95 0.97 1.00 IR MULTIPLIER 0.40 Revision: 12-Apr-17 0.60 0.75 0.80 0.90 Document Number: 28426 9 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 260 CLA-V www.vishay.com Vishay BCcomponents Table 10 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS Mounting IEC 60384-18, subclause 4.3 Shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter "Mounting" C/C: 5 % tan spec. limit IL2 spec. limit Endurance IEC 60384-18 / CECC 32300, subclause 4.15 Tamb = 150 C; UR applied; for test duration see Table 7 C/C: 20 % tan 2 x spec. limit IL2 spec. limit Useful life CECC 30301, subclause 1.8.1 Tamb = 150 C; UR and IR applied; for test duration see Table 7 C/C: 30 % tan 3 x spec. limit IL2 spec. limit no short or open circuit total failure percentage: 1 % Shelf life (storage at high temperature) IEC 60384-18 / CECC 32300, subclause 4.17 Tamb = 150 C; no voltage applied; 1000 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement For requirements see "Endurance test" above Reverse voltage IEC 60384-18 / CECC 32300, subclause 4.16 Tamb = 150 C: 125 h at U = -0.5 V, followed by 125 h at UR C/C: 15 % tan 1.5 x spec. limit IL2 spec. limit Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 12-Apr-17 Document Number: 28426 10 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000