©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP / HIGH VOLTAGE
Metric
Code
EIA Size
Code L - Length W - Width B - Bandwidth Band
Separation
2012 0805 2.0 (0.079)
± 0.2 (0.008)
1.2 (0.049)
± 0.2 (0.008)
0.5 (0.02
±0.25 (0.010) 0.75 (0.030)
3216 1206 3.2 (0.126)
± 0.2 (0.008)
1.6 (0.063)
± 0.2 (0.008)
0.5 (0.02)
± 0.25 (0.010) N/A
3225 1210 3.2 (0.126)
± 0.2 (0.008)
2.5 (0.098)
± 0.2 (0.008)
0.5 (0.02)
± 0.25 (0.010) N/A
4520 1808 4.5 (0.177)
± 0.3 (0.012)
2.0 (0.079
± 0.2 (0.008)
0.6 (0.024)
± 0.35 (0.014) N/A
4532 1812 4.5 (0.177)
± 0.3 (0.012)
3.2 (0.126)
± 0.3 (0.012)
0.6 (0.024)
± 0.35 (0.014) N/A
4564 1825 4.5 (0.177)
± 0.3 (0.012)
6.4 (0.250)
± 0.4 (0.016)
0.6 (0.024)
± 0.35 (0.014) N/A
5650 2220 5.6 (0.224)
± 0.4 (0.016)
5.0 (0.197)
± 0.4 (0.016)
0.6 (0.024)
± 0.35 (0.014) N/A
5664 2225 5.6 (0.224)
± 0.4 (0.016)
6.4 (0.250)
± 0.4 (0.016)
0.6 (0.024)
± 0.35 (0.014) N/A
Outline Drawing
KEMET's High Voltage Surface Mount Capacitors are designed to withstand high voltage applications. They
offer high capacitance with low leakage current and low ESR at high frequency. The capacitors have pure tin
(Sn) plated external electrodes for good solderability. X7R dielectrics are not designed for AC line filtering
applications. An insulating coating may be required to prevent surface arcing. These components are RoHS
compliant.
Applications Markets
• Switch Mode Power Supply • Power Supply
• Input Filter • High Voltage Power Supply
• Resonators • DC-DC Converter
• Tank Circuit • LCD Fluorescent Backlight Ballast
• Snubber Circuit • HID Lighting
• Output Filter • Telecommunications Equipment
• High Voltage Coupling • Industrial Equipment/Control
• High Voltage DC Blocking • Medical Equipment/Control
• Lighting Ballast • Computer (LAN/WAN Interface)
• Voltage Multiplier Circuits • Analog and Digital Modems
• Coupling Capacitor/CUK • Automotive
APPLICATIONS MARKETS
OUTLINE DRAWING
TABLE 1 - DIMENSIONS - MILLIMETERS (in.)
WL
TB
S
TIN PLATE
NICKEL PLATE
CONDUCTIVE
METALLIZATION
ELECTRODES
81
Ceramic Surface Mount
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP / HIGH VOLTAGE
* Contact KEMET Sales Representative for C, D, F & G Capacitance Tolerance availability.
Note: Actual thickness dimensions may be less than stated maximum. Check the KEMET website, www.kemet.com, for additional values and chip sizes available.
Ceramic Surface Mount
82
Series
Cap Code/
Voltage
500V
630V
1000V
500V
630V
1000V
1500V
2000V
500V
630V
1000V
1500V
2000V
500V
630V
1000V
1500V
2000V
2500V
3000V
500V
630V
1000V
1500V
2000V
2500V
3000V
500V
630V
1000V
1500V
2000V
2500V
3000V
500V
630V
1000V
1500V
2000V
2500V
3000V
500V
630V
1000V
1500V
2000V
2500V
3000V
1.0-2.4 C,D 109-249 DG DG DG
2.7-5.1 C,D K,M 279-519 DG DG DG
5.6-9.1 C,D J,K,M 569-919 DG DG DG
10 C,D J,K,M 100 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
11 C,D J,K,M 110 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
12 C,D J,K,M 120 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
13 C,D J,K,M 130 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
15 C,D G,J,K,M 150 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
16 C,D G,J,K,M 160 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
18 C,D G,J,K,M 180 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
20 C,D G,J,K,M 200 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
22 C,D G,J,K,M 220 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
24 C,D G,J,K,M 240 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
27 D,F,G,J,K,M 270 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
30 D,F,G,J,K,M 300 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
33 D,F,G,J,K,M 330 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
36 D,F,G,J,K,M 360 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
39 D,F,G,J,K,M 390 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
43 D,F,G,J,K,M 430 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
47 D,F,G,J,K,M 470 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
51 D,F,G,J,K,M 510 DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
56 F,G,J,K,M 560 DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
62 F,G,J,K,M 620 DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
68 F,G,J,K,M 680 DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
75 F,G,J,K,M 750 DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
82 F,G,J,K,M 820 DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
91 F,G,J,K,M 910 DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
100 F,G,J,K,M 101 DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LC LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
110 F,G,J,K,M 111 DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LC LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
120 F,G,J,K,M 121 DG EF EF EF EG EG EM EM EM FM FM LA LA LA LA LB LC LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
130 F,G,J,K,M 131 DG EF EF EF EG EM EM EM FM FM LA LA LA LA LB LC GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
150 F,G,J,K,M 151 DG EF EF EF EG EM EM EM FM FM LA LA LA LA LB LC GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
160 F,G,J,K,M 161 DG EF EF EF EG EM EM EM FM FM LA LA LA LA LC LC GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
180 F,G,J,K,M 181 DG EF EF EF EG EM EM EM FM FM LA LA LA LA LC LC GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
200 F,G,J,K,M 201 EF EG EG EM EM EM FM FM LA LA LA LA LC LC GH GH GH GH GH GK HE HE HE HE HE HE HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
220 F,G,J,K,M 221 EF EG EG EM EM EM FM FM LA LA LA LA LC LC GH GH GH GH GH GK HE HE HE HE HE HE HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
240 F,G,J,K,M 241 EF EG EG EM EM EM FM FM LA LA LA LB LC LC GH GH GH GH GH GK HE HE HE HE HE HE HG JP JP JP JP JP JP JP KE KE KE KE KE KE KF
270 F,G,J,K,M 271 EF EG EG EM EM EM FK FK LA LA LA LB LC LC GH GH GH GH GH GK HE HE HE HE HE HE HG JP JP JP JP JP JP JP KE KE KE KE KE KE KF
300 F,G,J,K,M 301 EF EG EG EM EM EM FK FK LA LA LA LB LC LC GH GH GH GH GH GK HE HE HE HE HE HE HG JP JP JP JP JP JP JP KE KE KE KE KE KE KF
330 F,G,J,K,M 331 EF EG EG EM EM EM FK FK LA LA LA LB LC LC GH GH GH GH GH GK HE HE HE HE HE HE HG JE JE JE JE JE JP JP KE KE KE KE KE KE KF
360 F,G,J,K,M 361 EG EG EG EM EM EM FK FS LA LA LA LB GK GK GK GK GH GK HE HE HE HE HE HE HG JE JE JE JE JE JP JP KE KE KE KE KE KE KF
390 F,G,J,K,M 391 EG EG EG EM EM EM FK FS LA LA LA LB GK GK GK GK GK GK HE HE HE HE HE HE HG JE JE JE JE JE JP JP KE KE KE KE KE KE KF
430 F,G,J,K,M 431 EG EG EG EM FM FM FS FS LA LB LB LC GK GK GK GK GK GK HE HE HE HE HE HE JE JE JE JE JE JP KE KE KE KE KE KE KF
470 F,G,J,K,M 471 EG EG EG EM FM FM FS FS LA LB LB LC GK GK GK GK GK GK HE HE HE HE HE HE JE JE JE JE JE JP KF KF KF KF KE KE KF
510 F,G,J,K,M 511 EG EG EG EM FM FM FS LA LB LB LC GH GH GH GK HE HE HE HE HE HE JP JP JP JP JP JP KF KF KF KF KE KE KF
560 F,G,J,K,M 561 EG EG EG EM FM FM FS LA LB LB LC GH GH GH GK HE HE HE HE HG HE JP JP JP JP JP JP KF KF KF KF KE KE KF
620 F,G,J,K,M 621 EG EM FM FM FS LA LB LB GH GH GH GK HE HE HE HE HG HE JP JP JP JP JP JP KF KF KF KF KE KF
680 F,G,J,K,M 681 EG EM FM FM FS LB LB LB GH GH GH GK HE HE HE HE HG HG JE JE JE JP JP JP KF KF KF KF KE KF
750 F,G,J,K,M 751 EG EM FM FM LB LB LB GH GH GH GK HE HE HE HG HG HG JE JE JE JP JP JP KE KE KE KF KE KF
820 F,G,J,K,M 821 EG EM FM FM LB LB LB GH GH GH GK HE HE HE HG HG HG JE JE JE JP JP JP KE KE KE KF KE KF
910 F,G,J,K,M 911 EG FM FM FM LB LB LB GH GH GH HE HE HE HG HG HG JE JP JP JP JP JP KE KE KE KF KE KF
1,000 F,G,J,K,M 102 EG FM FM FM LB LB LB GH GH GH HE HE HE HG HG HG JE JP JP JP JP JP KE KE KE KF KE KF
1,100 F,G,J,K,M 112 FM FK FK LC LC LC GH GK GK HE HE HE HG HG JE JP JP JP JP KE KE KE KF KF KF
1,200 F,G,J,K,M 122 FM FK FK LC LC LC GH GK GK HE HE HE HG HG JE JP JP JP JP KE KE KE KF KF KF
1,300 F,G,J,K,M 132 FM FS FS LC LC LC GH GK GK HE HE HE HG JE JP JP JP KE KE KE KF KF
1,500 F,G,J,K,M 152 FK FS FS LC LC LC GK GK GK HE HE HE HG JE JP JP JP KE KE KE KF KF
1,600 F,G,J,K,M 162 FK FS FS LC LC LC GK GK GK HE HG HG HG JE JP JP JP KE KE KE KF
1,800 F,G,J,K,M 182 FK FS FS LC LC LC GK GK GK HE HG HG HG JE JP JP JP KE KE KE KF
2,000 F,G,J,K,M 202 FK LC GK GK GK HE HG HG JE JP JP KE KE KE KF
2,200 F,G,J,K,M 222 FK LC GK GK GK HE HG HG JE JP JP KE KE KE KF
2,400 F,G,J,K,M 242 FS LC GK HE HG HG JP JP JP KE KE KE
2,700 F,G,J,K,M 272 FS LC GK HE HG HG JP JP JP KE KE KE
3,000 F,G,J,K,M 302 FS GK HG HG HG JP JP JP KE KE KE
3,300 F,G,J,K,M 332 FS GK HG HG HG JP JP JP KE KE KE
3,600 F,G,J,K,M 362 GK HG HG HG JP JP JP KE KF KF
3,900 F,G,J,K,M 392 GK HG HG HG JP JP JP KE KF KF
4,300 F,G,J,K,M 432 HG HG HG JP JP JP KE KF KF
4,700 F,G,J,K,M 472 HG HG HG JP JP JP KE KF KF
5,100 F,G,J,K,M 512 HG JP JP JP KE KF KF
5,600 F,G,J,K,M 562 HG JP JP JP KE KF KF
6,200 F,G,J,K,M 622 HG JP KE KF KF
6,800 F,G,J,K,M 682 HG JP KE KF KF
7,500 F,G,J,K,M 752 HG JP KF
8,200 F,G,J,K,M 822 HG JP KF
9,100 F,G,J,K,M 912 KF
10,000 F,G,J,K,M 103 KF
C0G DIELECTRIC CAPACITANCE VALUES AND THICKNESS TARGETS (mm)
0805 1206 1210 1808 2225
Cap
pF Cap Tol.
1825 22201812
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP / HIGH VOLTAGE
Note: Actual thickness dimensions may be less than stated maximum.
Check the KEMET website, www.kemet.com, for additional values and chip sizes available.
83
Ceramic Surface Mount
Series
Cap Code/
Voltage
500V
630V
1000V
500V
630V
1000V
1500V
2000V
500V
630V
1000V
1500V
2000V
500V
630V
1000V
1500V
2000V
2500V
3000V
500V
630V
1000V
1500V
2000V
2500V
3000V
500V
630V
1000V
1500V
2000V
2500V
3000V
500V
630V
1000V
1500V
2000V
2500V
3000V
500V
630V
1000V
1500V
2000V
2500V
3000V
10 J,K,M 100 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
11 J,K,M 110 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
12 J,K,M 120 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
13 J,K,M 130 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
15 J,K,M 150 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
16 J,K,M 160 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
18 J,K,M 180 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
20 J,K,M 200 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
22 J,K,M 220 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
24 J,K,M 240 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
27 J,K,M 270 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
30 J,K,M 300 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
33 J,K,M 330 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
36 J,K,M 360 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
39 J,K,M 390 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
43 J,K,M 430 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
47 J,K,M 470 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
51 J,K,M 510 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
56 J,K,M 560 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
62 J,K,M 620 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
68 J,K,M 680 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
75 J,K,M 750 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
82 J,K,M 820 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
91 J,K,M 910 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK
100 J,K,M 101 DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
110 J,K,M 111 DG DG DG EF EF EF EF EG FM FM FM FM FM LB LB LB LB LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
120 J,K,M 121 DG DG DG EF EF EF EF EG FM FM FM FM FM LA LA LA LA LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
130 J,K,M 131 DG DG DG EF EF EF EF EG FL FL FL FL FL LA LA LA LA LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
150 J,K,M 151 DG DG DG EF EF EF EF EG FL FL FL FL FL LA LA LA LA LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
180 J,K,M 181 DG DG DG EF EF EF EF EG FL FL FL FL FL LA LA LA LA LB LB LB GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
220 J,K,M 221 DG DG DG EF EF EF EF EG FL FL FL FL FL LA LA LA LA LB LB LB GK GK GK GK GK GK GK HE HE HE HE HE HE HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
270 J,K,M 271 DG DG DG EF EF EF EF EG FL FL FL FL FL LA LA LA LA LB LB LC GK GK GK GK GK GK GK HE HE HE HE HE HE HG JP JP JP JP JP JP JP KE KE KE KE KE KE KF
330 J,K,M 331 DG DG DG EF EF EF EF EG FL FL FL FL FL LA LA LA LA LB LB LC GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KE KE KE KE KE KE KF
390 J,K,M 391 DG DG DG EF EF EF EF EG FL FL FL FL FL LA LA LA LA LB LB LC GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KE KE KE KE KE KE KF
470 J,K,M 471 DG DG DG EF EF EF EF EG FL FL FL FL FL LA LA LA LA LB LB LC GH GH GH GH GH GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
560 J,K,M 561 DG DG DG EF EF EF EF EG FL FL FL FL FL LA LA LA LA LB LB LC GH GH GH GH GH GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
680 J,K,M 681 DG DG DG EF EF EF EF EG FL FL FL FL FL LA LA LA LA LB LC LC GH GH GH GH GH GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
820 J,K,M 821 DG DG DG EF EF EF EF EG FL FL FL FL FL LA LA LA LA LB LC LC GH GH GH GH GH GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
1,000 J,K,M 102 DG DG DG EF EF EF EF EG FL FL FL FL FL LA LA LA LA LB LC LC GH GH GH GH GH GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
1,200 J,K,M 122 DG DG DG EF EF EF EG EG FL FL FL FL FM LB LB LB LB LC GH GH GH GH GH GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
1,500 J,K,M 152 DG DG DG EF EF EF EG EG FL FL FL FL FM LA LA LA LB LC GH GH GH GH GH HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
1,800 J,K,M 182 DG DG DG EF EF EF EG EG FL FL FL FL FM LA LA LA LB LC GH GH GH GH GH HE HE HE HE HE HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
2,000 J,K,M 202 DG DG DG EF EF EF EG EG FL FL FL FL FM LA LA LA LB LC GH GH GH GH GH HE HE HE HE HE HG HG JE JE JE JE JE JP JP KF KF KF KF KF KF KF
2,200 J,K,M 222 DG DG DG EF EF EF EG EG FL FL FL FL FM LA LA LA LB LC GH GH GH GH GH HE HE HE HE HE HG HG JE JE JE JE JE JP JP KF KF KF KF KF KF KF
2,700 J,K,M 272 DG DG DG EF EF EF EG FL FL FL FL FM LA LA LA LB LC GH GH GH GH GK HE HE HE HE HE HG HG JE JE JE JE JE JP JP KE KE KE KE KE KF KF
3,300 J,K,M 332 DG DG DG EF EF EF EG FL FL FL FL FM LA LA LA LB GH GH GH GH GK HE HE HE HE HE HG HG JE JE JE JE JE JP JP KE KE KE KE KE KF KF
3,900 J,K,M 392 DG EF EF EF EG FL FL FL FL FK LA LA LA LB GH GH GH GH GK HE HE HE HE HE JE JE JE JE JE JP JP KE KE KE KE KE KF KF
4,700 J,K,M 472 DG EF EF EF EG FL FL FL FL FK LA LA LA LB GH GH GH GH HE HE HE HE HE JE JE JE JE JP KE KE KE KE KE KF KF
5,600 J,K,M 562 DG EF EF EF FL FL FL FM LA LB LB LC GH GH GH GK HE HE HE HE HE JE JE JE JE JP KE KE KE KE KE KF KF
6,800 J,K,M 682 DG EG EG EG FL FL FL FM LA LB LB LC GH GH GH GK HE HE HE HE HE JE JE JE JE JP KE KE KE KE KF
8,200 J,K,M 822 DG EG EG EG FL FL FL FK LA LB LB LC GH GH GH GK HE HE HE HE HE JE JE JE JE JP KE KE KE KE KF
10,000 J,K,M 103 EG EG EG FL FL FL FK LA LB LB LC GH GH GH GK HE HE HE HE JE JE JE JE KE KE KE KE KF
12,000 J,K,M 123 EG FL FL FL FK LA LC LC GH GK GK GK HE HE HE HG JE JP JP JP KE KE KE KE KF
15,000 J,K,M 153 EG FL FL FL LA LC LC GH GK GK HE HE HE HG JE JP JP JP KE KE KE KE
18,000 J,K,M 183 FL FL FL LA GH GK GK HE HE HE HG JE JP JP JP KE KE KE KE
22,000 J,K,M 223 FL FM FM LA GH GK GK HE HG HG HG JE JP JP JP KE KF KF KF
27,000 J,K,M 273 FM FK FK LA GH HE HG HG HG JE JP JP JP KE KF KF KF
33,000 J,K,M 333 FM LC GH HE HG HG JE JP JP JP KE KF KF KF
39,000 J,K,M 393 FK LC GH HE HG HG JE JP JP KE KF KF KF
47,000 J,K,M 473 FK LC GH HE HG HG JE JP JP KE KF KF KF
56,000 J,K,M 563 LC GH HE JE KE KF KF
62,000 J,K,M 623 GK HG JE KE KF KF
68,000 J,K,M 683 GK HG JE KE KF KF
82,000 J,K,M 823 GK HG JE KE
100,000 J,K,M 104 HG JE KE
120,000 J,K,M 124 HG JP KF
150,000 J,K,M 154 HG JP KF
180,000 J,K,M 184 HG JP KF
220,000 J,K,M 224 KF
1808 2225
X7R DIELECTRIC CAPACITANCE VALUES AND THICKNESS TARGETS (mm)
Cap
pF Cap Tol.
1825 222018120805 1206 1210
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP / HIGH VOLTAGE
Capacitor Ordering Information
Property Specification
Capacitance
C0G: 1 pF to 0.010 µF
X7R: 10 pf to 0.22 µF
25°C, 1.0 ± 0.2 Vrms, 1 kHz (1 MHz for ≤ 1000 pF (C0G only)
Cap Tolerance C0G: C*, D*, F*, G*, J, K, M * Contact KEMET Sales for availability.
X7R: J, K, M
DF C0G: 0.1% Max
X7R: 2.5% Max
Voltage Ratings 500 V, 1000 V, 1500 V, 2000 V, 2500 V, 3000 V
Operating Temperature Range From -55C to +125C
25ºC IR @ 500V 100 GΩor 1000 MΩ-µF, whichever is less
125ºC IR @ 500V 10 GΩor 100 MΩ-µF, whichever is less
-55ºC TCC
+125ºC TCC
X7R: + 15%
C0G: + 30 ppm / ºC
Dielectric Strength 150% of Rated Voltage for Rated Voltage <1000 V
120% of Rated Voltage for Rated Voltage >=1000V
Ripple Current Consult KEMET Sales Representative
Electrical Parameters
Marking
These chips are supplied unmarked. If required, they can be supplied LASER-marked at an extra cost.
Packaging
KEMET High Voltage Surface Mount MLCC are available packaged in tape and reel configuration, or bulk
Soldering Process
The 0805 and 1206 case sizes are suitable for either reflow or wave soldering processes. Sizes 1210 and
larger should be limited to reflow soldering only. All sizes incorporate the standard KEMET barrier layer of
pure nickel with an overplating of pure tin (Sn) for excellent solderability and resistance to solder leaching of
Recommended Solder Pad Dimensions
the termination.
bag as outlined on page 83. Please consult factory for waffle packaging options.
Details on the marking format is located on page 97.
mm in. mm in. mm in. mm in.
0805 3.30 0.130 0.70 0.028 1.60 0.063 1.30 0.051
1206 4.50 0.177 1.50 0.059 2.00 0.079 1.50 0.059
1210 4.50 0.177 1.50 0.059 2.90 0.114 1.50 0.059
1808 5.90 0.232 2.30 0.091 2.40 0.094 1.80 0.071
1812 5.90 0.232 2.30 0.091 3.70 0.146 1.80 0.071
1825 5.90 0.232 2.30 0.091 6.90 0.272 1.80 0.071
2220 7.00 0.276 3.30 0.130 5.50 0.217 1.85 0.073
2225 7.00 0.276 3.30 0.130 6.80 0.268 1.85 0.073
L (Pad Length)
Chip Size T (Total Length) S (Separation W (Pad Width)
pF
From -55ºC to +125ºC
CAPACITOR ORDERING INFORMATION
ELECTRICAL PARAMETERS
MARKING
PACKAGING
SOLDERING PROCESS
RECOMMENDED SOLDER PAD DIMENSIONS
84
C 0805 C 102 K C R A C
Style
C - Ceramic
Chip Size
0805; 1206; 1210; 1808;
1812; 1825; 2220; 2225
Specification
C - Standard
Capacitance Code, pF
First two digits represent significant figures.
Third digit specifies number of zeros. 100 pF = 101.
(Use “9” for 1.0 through 9.9 pF)
(Use “8” for 0.1 through .99 pF)
Capacitance Tolerance
C = ±0.25pF* J = ±5%
D = ±0.5pF* K = ±10%
F = ±1%* M = ±20%
G = ±2%*
* Contact KEMET Sales for availability.
Voltage
C = 500V F = 1500V
B = 630V G = 2000V
D = 1000V Z = 2500V
H = 3000V
Temperature Characteristic
Designated by Capacitance
Change over Temperature Range
G – (C0G) (±30ppm/C) (-55°C +125°C)
R – X7R (±15%) (-55°C +125°C)
End Metallization
C = Standard
L = SnPb plated nickel barrier
(SnPb 5% min)
Failure Rate Level
A = Not Applicable
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP CAPACITORS
This ch
Thickness Code Reference Chart
Packaging Quantity Based on Finished Chip Thickness Specifications
78
This chart refers to ceramic chip thickness codes on pages 73 – 76.
Note: TU suffix represents tape and reel packaging of unmarked components.
Note: TM suffix represents tape and reel packaging of marked components.
Cases sizes d1210 are 8mm tape with 4mm pitch and Case Sizes >1210 are 12mm tape and 8mm pitch.
art refers to ceramic chip thickness codes on pages 73-76.
Thickness
Code Chip
Size Chip Thickness
Range (mm) Qty per Reel
7" Plastic Qty per Reel
13" Plastic Qty per Reel
7" Paper Qty per Reel
13" Paper Qty per Bulk
Cassette
A
A 0201 0.30 ± 0.03 N/A N/A 15,000 N/A N/A
BB 0402 0.50 ± 0.05 N/A N/A 10,000 50,000 50,000
CB 0603 0.80 ± 0.07 N/A N/A 4,000 10,000 15,000
CC 0603 0.80 ± 0.10 N/A N/A 4,000 10,000 N/A
CD 0603 0.80 ± 0.15 N/A N/A 4,000 10,000 N/A
DB 0805 0.60 ± 0.10 N/A N/A 4,000 10,000 10,000
DC 0805 0.78 ± 0.10 N/A N/A 4,000 10,000 N/A
DD 0805 0.90 ± 0.10 N/A N/A 4,000 10,000 N/A
DE 0805 1.00 ± 0.10 2,500 10,000 N/A N/A N/A
DF 0805 1.10 ± 0.10 2,500 10,000 N/A N/A N/A
DG 0805 1.25 ± 0.15 2,500 10,000 N/A N/A N/A
DH 0805 1.25 ± 0.20 2,500 10,000 N/A N/A N/A
DJ 0805 1.25 ± 0.20 3,000 N/A N/A N/A N/A
DK 0805 1.25 ± 0.15 3,000 N/A N/A N/A N/A
DL 0805 0.95 ± 0.10 4,000 10,000 N/A N/A N/A
EB 1206 0.78 ± 0.10 4,000 10,000 4,000 10,000 N/A
EC 1206 0.90 ± 0.10 4,000 10,000 N/A N/A N/A
ED 1206 1.00 ± 0.10 2,500 10,000 N/A N/A N/A
EE 1206 1.10 ± 0.10 2,500 10,000 N/A N/A N/A
EF 1206 1.20 ± 0.15 2,500 10,000 N/A N/A N/A
EG 1206 1.60 ± 0.15 2,000 8,000 N/A N/A N/A
EH 1206 1.60 ± 0.20 2,000 8,000 N/A N/A N/A
EJ 1206 1.70 ± 0.20 2,000 8,000 N/A N/A N/A
EK 1206 0.80 ± 0.10 2,000 8,000 N/A N/A N/A
EL 1206 1.15 ± 0.15 2,000 8,000 N/A N/A N/A
EM 1206 1.25 ± 0.15 2,500 10,000 N/A N/A N/A
EN 1206 0.95 ± 0.10 4,000 10,000 N/A N/A N/A
FB 1210 0.78 ± 0.10 4,000 10,000 N/A N/A N/A
FC 1210 0.90 ± 0.10 4,000 10,000 N/A N/A N/A
FD 1210 0.95 ± 0.10 4,000 10,000 N/A N/A N/A
FE 1210 1.00 ± 0.10 2,500 10,000 N/A N/A N/A
FF 1210 1.10 ± 0.10 2,500 10,000 N/A N/A N/A
FG 1210 1.25 ± 0.15 2,500 10,000 N/A N/A N/A
FH 1210 1.55 ± 0.15 2,000 8,000 N/A N/A N/A
FJ 1210 1.85 ± 0.20 2,000 8,000 N/A N/A N/A
FK 1210 2.10 ± 0.20 2,000 8,000 N/A N/A N/A
FL 1210 1.40 ± 0.15 2,000 8,000 N/A N/A N/A
FM 1210 1.70 ± 0.20 2,000 8,000 N/A N/A N/A
FN 1210 1.85 ± 0.20 2,000 8,000 N/A N/A N/A
FO 1210 1.50 ± 0.20 2,000 8,000 N/A N/A N/A
FP 1210 1.60 ± 0.20 2,000 8,000 N/A N/A N/A
FQ 1210 2.50 ± 0.22 1,500 N/A N/A N/A N/A
FR 1210 2.25 ± 0.20 2,000 8,000 N/A N/A N/A
FS 1210 2.50 ± 0.20 1,000 4,000 N/A N/A N/A
FT 1210 1.90 ± 0.20 1,500 4,000 N/A N/A N/A
LD 1808 0.90 ± 0.10 4,000 10,000 N/A N/A N/A
GB 1812 1.00 ± 0.10 1,000 4,000 N/A N/A N/A
GC 1812 1.10 ± 0.10 1,000 4,000 N/A N/A N/A
GD 1812 1.25 ± 0.15 1,000 4,000 N/A N/A N/A
GE 1812 1.30 ± 0.10 1,000 4,000 N/A N/A N/A
GF 1812 1.50 ± 0.10 1,000 4,000 N/A N/A N/A
GG 1812 1.55 ± 0.10 1,000 4,000 N/A N/A N/A
GH 1812 1.40 ± 0.15 1,000 4,000 N/A N/A N/A
GJ 1812 1.70 ± 0.15 1,000 4,000 N/A N/A N/A
GK 1812 1.60 ± 0.20 1,000 4,000 N/A N/A N/A
GL 1812 1.90 ± 0.20 1,000 4,000 N/A N/A N/A
GM 1812 2.00 ± 0.20 1,000 4,000 N/A N/A N/A
GN 1812 1.70 ± 0.20 1,000 4,000 N/A N/A N/A
GO 1812 2.50 ± 0.20 500 N/A N/A N/A N/A
HB 1825 1.10 ± 0.15 1,000 4,000 N/A N/A N/A
HC 1825 1.15 ± 0.15 1,000 4,000 N/A N/A N/A
HD 1825 1.30 ± 0.15 1,000 4,000 N/A N/A N/A
HE 1825 1.40 ± 0.15 1,000 4,000 N/A N/A N/A
HF 1825 1.50 ± 0.15 1,000 4,000 N/A N/A N/A
JB 2220 1.00 ± 0.15 1,000 4,000 N/A N/A N/A
JC 2220 1.10 ± 0.15 1,000 4,000 N/A N/A N/A
JD 2220 1.30 ± 0.15 1,000 4,000 N/A N/A N/A
JE 2220 1.40 ± 0.15 1,000 4,000 N/A N/A N/A
JF 2220 1.50 ± 0.15 1,000 4,000 N/A N/A N/A
JG 2220 1.70 ± 0.15 1,000 4,000 N/A N/A N/A
JH 2220 1.80 ± 0.15 1,000 4,000 N/A N/A N/A
JO 2220 2.40 ± 0.15 500 2,000 N/A N/A N/A
KB 2225 1.00 ± 0.15 1,000 4,000 N/A N/A N/A
KC 2225 1.10 ± 0.15 1,000 4,000 N/A N/A N/A
KD 2225 1.30 ± 0.15 1,000 4,000 N/A N/A N/A
KE 2225 1.40 ± 0.15 1,000 4,000 N/A N/A N/A
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
KEMET offers Multilayer Ceramic Chip Capacitors
packaged in 8mm and 12mm plastic tape on 7" and
13" reels in accordance with EIA standard 481-1:
Taping of surface mount components for automatic
handling. This packaging system is compatible with all
tape
fed
automatic
pick
and
place
systems. See page 78
for details on reeling quantities for commercial chips
and page 87 for MIL-PRF-55681 chips.
CERAMIC CHIP CAPACITORS
Packaging Information
Tape & Reel Packaging
8mm ±.30
(.315 ±.012")
or
12mm ±.30
(.472 ±.012")
178mm (7.00")
or
330mm (13.00")
Anti-Static Reel
Embossed Carrier*
0402 and 0603 case sizes
available on punched paper only.
Embossment
Anti-Static Cover Tape
(.10mm (.004") Max Thickness)
Chip Orientation
in Pocket
(except 1825 Commercial, and 1825 & 2225 Military)
* Punched paper carrier used for 0402 and 0603 case size.
g
handling. This packaging system is compatible with all
tape
fed
automatic
pick
and
place
systems. See page 81
for details on reeling quantities for commercial chips
and page 90 for MIL-PRF-55681 chips.
KEMET
®
X
C
G
Z
Y
Grid
placement
courtyard Z
2.14
2.78
3.30
4.50
4.50
5.90
5.90
7.00
7.00
G
0.28
0.68
0.70
1.50
1.50
2.30
2.30
3.30
3.30
X
0.74
1.08
1.60
2.00
2.90
3.70
6.90
5.50
6.80
Y(ref)
0.93
1.05
1.30
1.50
1.50
1.80
1.80
1.85
1.85
C(ref)
1.21
1.73
2.00
3.00
3.00
4.10
4.10
5.15
5.15
Z
3.18
3.70
4.90
4.90
G
0.68
0.70
1.50
1.50
X
0.80
1.10
1.40
2.00
Y(ref)
1.25
1.50
1.70
1.70
Smin
1.93
2.20
3.20
3.20
Wave SolderReflow Solder
Calculation Formula
Z = Lmin + 2Jt + Tt
G = Smax - 2Jh -Th
X = Wmin + 2Js + Ts
Tt, Th, Ts = Combined tolerances
0402
0603
0805
1206
1210
1812
1825
2220
2225
Dimension
Not Recommended
Not Recommended
C
X
Grid
Placement
Courtyard
GY
Z
SURFACE MOUNT LAND DIMENSIONS - CERAMIC CHIP CAPACITORS - MM
93
Packaging
Case Sizes ≤ 1210 are 8 mm tape with 4 mm pitch.
Case Sizes >1210 are 12 mm tape with 8 mm pitch.
Note: TU suffix represents tape and reel packaging of unmarked components.
TM suffix represents tape and reel packaging of marked components.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Performance Notes
1. Cover Tape Break Force: 1.0 Kg Minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width Peel Strength
8 mm 0.1 Newton to 1.0 Newton (10g to 100g)
12 mm 0.1 Newton to 1.3 Newton (10g to 130g)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier
tape shall be 165to 180from the plane of the carrier tape. During peeling, the carrier and/or cover tape
shall be pulled at a velocity of 300 ±10 mm/minute.
3. Reel Sizes: Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13")
reels (with C-7280). Note that 13” reels are preferred.
4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.
Refer to EIA-556.
Embossed Carrier Tape Configuration: Figure 1
NOTES
1. B1 dimension is a reference dimension for tape feeder clearance only.
2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of
embossment location and hole location shall be applied independent of each other.
3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require
additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2)
4. The cavity defined by A0,B0,and K0shall be configured to surround the part with sufficient clearance such that the chip does not pro-
trude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical
restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm
maximum in the pocket (not applicable to vertical clearance.)
Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern)
Constant Dimensions — Millimeters (Inches)
Tape Size D0EP
0P2T Max T1Max
8 mm 1.5 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 0.600 0.100
and +0.10 -0.0
12 mm (0.059 (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) (0.024) (0.004)
+0.004, -0.0)
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch B1Max. D1Min. F P1R Min. T2Max W A0B0K0
Note 1 Note 2 Note 3 Note 4
8 mm Single 4.4 1.0 3.5 ±0.05 4.0 ±0.10 25.0 2.5 8.0 ±0.30
(4 mm)
(0.173) (0.039) (0.138 ±0.002) (0.157 ±0.004) (0.984) (0.098) (.315 ±0.012)
12 mm Double 8.2 1.5 5.5 ±0.05 8.0 ±0.10 30.0 4.6 12.0 ±0.30
(8 mm) (0.323) (0.059) (0.217 ±0.002) (0.315 ±0.004) (1.181) (0.181) (0.472 ±0.012)
TANTALUM, CERAMIC AND
ALUMINUM CHIP CAPACITORS
Packaging Information
94
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Embossed Carrier Tape Configuration (cont.)
Sketch D: Tape Camber (Top View)
Allowable camber to be 1 mm/250 mm.
250mm (9.843)
1mm (0.039) Max.
1mm (0.039) Max.
Table 2 – REEL DIMENSIONS (Metric will govern)
Figure 3: Reel Dimensions (Metric Dimensions will govern)
Tape Size A Max B* Min C D* Min N Min W1W2Max W3
8 mm 330.0 1.5 13.0 ± 0.20 20.2 50.0 8.4 14.4 7.9 Min
(12.992) (0.059) (0.512 ± 0.008) (0.795) (1.969) +1.5, -0.0 (0.567) (0.311)
See (0.331 10.9 Max
Note 3 +0.059, -0.0) (0.429)
12 mm 330.0 1.5 13.0 ± 0.20 20.2 Table 1 12.4 18.4 11.9 Min
(12.992) (0.059) (0.512 ± 0.008) (0.795) +2.0, -0.0 (0.724) (0.469)
(0.488 15.4 Max
+0.078, -0.0) (0.606)
TANTALUM, CERAMIC AND
ALUMINUM CHIP CAPACITORS
Packaging Information
Figure 2:
Tape Leader
& Trailer
Dimensions
(Metric
Dimensions
Will Govern)
400mm (15.75) Min.
20°
95
Packaging
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
20°
20°
Maximum
component rotation.
Typical
component
center line
Punched Carrier (Paper Tape) Configuration (Ceramic Chips Only):
Table 1: 8 & 12mm Punched Tape
(Metric Dimensions Will Govern)
Variable Dimensions - Millimeters (Inches)
Note:
1. A0, B0 and T determined by the maximum dimensions to the ends of the terminals extending from the
body and/or the body dimensions of the component. The clearance between the ends of the terminals or
body of the component to the sides and depth of the cavity (A0, B0 and T) must be within 0.05mm (.002)
minimum and 0.50mm (.020) maximum. The clearance allowed must also prevent rotation of the component
within the cavity of not more than 20 degrees (see sketches A and B).
2. Tape with components shall pass around radius "R" without damage.
3. KEMET nominal thicknesses are: 0402 = 0.6mm and all others 0.95mm minimum.
8mm
and
12mm
1.5
+0.10, -0.0
(.059
+0.004, -0.0)
1.75 ±0.10
(.069 ±0.004)
4.0 ± 0.10
(.157 ± 0.004)
2.0 ± 0.05
(.079 ± 0.002)
0.10
(.004)
Max.
0.75
(.030)
Min.
0.75
(.030)
Min.
25 (.984)
See Note 2
Table 1
Tape
Size D0P0
EP2T1G1G2R Min.
8mm
1/2
Pitch
2.0 ± 0.10
(.079 ±.004)
See Require-
ments
Section 3.3 (d)
3.5 ± 0.05
(.138 ± .002)
8.0 ± 0.3
(.315 ± 0.012)
See Note 1
Table 1
1.1mm (.043)
Max. for Paper
Base Tape and
1.6mm (.063)
Max. for Non-
Paper Base
Compositions.
See Note 3.
Tape
Size P1W
FA0B0T
8mm 4.0 ± 0.10
(0.157 ± .004)
12mm 4.0 ± 0.10
(0.157 ± .004)
12mm
Double
Pitch
8.0 ± 0.10
(0.315 ± .004)
12.0 ± 0.3
(.472 ± .012)
5.5 ± 0.05
(.217 ± .002)
Table 1: 8 & 12mm Punched Tape
(Metric Dimensions Will Govern)
Constant Dimensions - Millimeters (Inches)
Sketch B:
Max. Component
Rotation - Front
Cross Sectional View
Sketch C:
Component Rotation - Top View
A
0
B
0
P
1
P
0
P
2
D
0
F
E
W
Center lines
of cavity
10 pitches cumulative
tolerance on tape
±0.2 (±0.008)
Top
Tape
Cover
T
User Direction of Feed
T
1
Max. Cavity Size
See Note 1
Table 1
Bottom
Tape
Cover
G
2
R
(Min.)
Sketch A:
Bending Radius
See Note 2
Table 1
CERAMIC CHIP CAPACITORS
Packaging Information
96
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP CAPACITORS
Packaging Information
CAPACITOR MARKING TABLE
(Marking Optional - Not Available
for 0402 Size or Y5V Dielectric)
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
d
e
f
m
n
t
y
0.10
0.11
0.12
0.13
0.15
0.16
0.18
0.20
0.22
0.24
0.27
0.30
0.33
0.36
0.39
0.43
0.47
0.51
0.56
0.62
0.68
0.75
0.82
0.91
0.25
0.35
0.40
0.45
0.50
0.60
0.70
0.80
0.90
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
2.5
3.5
4.0
4.5
5.0
6.0
7.0
8.0
9.0
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
25
35
40
45
50
60
70
80
90
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
250
350
400
450
500
600
700
800
900
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5100
5600
6200
6800
7500
8200
9100
2500
3500
4000
4500
5000
6000
7000
8000
9000
10,000
11,000
12,000
13,000
15,000
16,000
18,000
20,000
22,000
24,000
27,000
30,000
33,000
36,000
39,000
43,000
47,000
51,000
56,000
62,000
68,000
75,000
82,000
91,000
25,000
35,000
40,000
45,000
50,000
60,000
70,000
80,000
90,000
100,000
110,000
120,000
130,000
150,000
160,000
180,000
200,000
220,000
240,000
270,000
300,000
330,000
360,000
390,000
430,000
470,000
510,000
560,000
620,000
680,000
750,000
820,000
910,000
250,000
350,000
400,000
450,000
500,000
600,000
700,000
800,000
900,000
Alpha
Character
Numeral
901 2 3 4 5
Capacitance (pF) For Various Numeral Identifiers
1,000,000
1,100,000
1,200,000
1,300,000
1,500,000
1,600,000
1,800,000
2,000,000
2,200,000
2,400,000
2,700,000
3,000,000
3,300,000
3,600,000
3,900,000
4,300,000
4,700,000
5,100,000
5,600,000
6,200,000
6,800,000
7,500,000
8,200,000
9,100,000
2,500,000
3,500,000
4,000,000
4,500,000
5,000,000
6,000,000
7,000,000
8,000,000
9,000,000
7
10,000,000
11,000,000
12,000,000
13,000,000
15,000,000
16,000,000
18,000,000
20,000,000
22,000,000
24,000,000
27,000,000
30,000,000
33,000,000
36,000,000
39,000,000
43,000,000
47,000,000
51,000,000
56,000,000
62,000,000
68,000,000
75,000,000
82,000,000
91,000,000
25,000,000
35,000,000
40,000,000
45,000,000
50,000,000
60,000,000
70,000,000
80,000,000
90,000,000
6
Laser marking is available as an extra-cost option for
most KEMET ceramic chips. Such marking is two
sided, and includes a K to identify KEMET, followed by
two characters (per EIA-198 - see table below) to
identify the capacitance value. Note that marking is
not available for size 0402 nor for any Y5V chip. In
addition, the 0603 marking option is limited to the K
only.
Example shown is 1,000 pF capacitor.
KA3
Table 2 – Capacitance Values Available
In Bulk Cassette Packaging
0402
0603
0805
All
All
C0G
X7R
Y5V
All
All
109
109
109
221
221
221
221
221
104
104
All
All
181
331
102
392
103
273
104
104
224
224
Case
Size Dielectric Voltage
Min.
Cap
Value
Max.
Cap
Value
All
All
200
100
50
200
100
50
25
16
25
16
Terminations: KEMET nickel barrier layer with a tin overplate.
0.3
0.7
0.75
EIA
Size
Code
Length
L
Width
W
Thickness
T
Bandwidth
B
Minimum
Separation
S
Metric
Size
Code
Number of
Pcs/Cassette
50,000
15,000
10,000
0402
0603
0805
1.0 ± 0.05
1.6 ± 0.07
2.0 ± 0.10
0.5 ± 0.05
0.8 ± 0.07
1.25 ± 0.10
0.5 ± .05
0.8 ± .07
0.6 ± .10
0.2 to 0.4
0.2 to 0.5
0.5 to 0.75
1005
1608
2012
Table 1 – Capacitor Dimensions for Bulk
Cassette Packaging – Millimeters
Unit: mm
* Reference
110 ± 0.7
31.5 ±0
0.2
36 ±0
0.2
19.0*
5.0*
10*
53.3*
6.8 ± 0.1
8.8 ± 0.1
12.0 ± 0.1
3.0 ±0
0.2
2.0 ±0.1
0
1.5 ±0
0.1
Bulk Cassette Packaging (Ceramic Chips only)
(Meets Dimensional Requirements IEC-286-6 and EIAJ 7201)
97
Packaging
