PS2805-1-F3-A - RENESAS TECHNOLOGY

R08DS0095EJ0400 Rev.4.00 Page 1 of 14

Jan 23, 2013

The mark <R> shows major revised points.

The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.

Data Sheet

PS2805-1, PS2805-4

HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE SSOP PHOTOCOUPLER

DESCRIPTION

The PS2805-1 and PS2805-4 are optically coupled isolators containing GaAs light emitting diodes and an NPN silicon

phototransistor in a plastic SSOP for high density applications.

This package has shield effect to cut off ambient light.

FEATURES

• High isolation voltage (BV = 2 500 Vr.m.s.)

• Small and thin package (4,16-pin SSOP, Pin pitch 1.27 mm)

• High collector to emitter voltage (VCEO = 80 V)

• AC input response

• High-speed switching (tr = 3

s TYP., tf = 5

s TYP.)

• Ordering number of tape product: PS2805-1-F3, PS2805-4-F3

• Pb-Free product

• Safety standards

• UL approved: No. E72422

• BSI approved (BS EN 60065, BS EN 60950)

• CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)

• DIN EN 60747-5-5 (VDE 0884-5) approved (Option)

APPLICATIONS

• Programmable logic controllers

• Measuring instruments

• Hybrid IC

R08DS0095EJ0400

Rev.4.00

Jan 23, 2013

<R>

1. Anode, Cathode

2. Cathode, Anode

3. Emitter

4. Collector

Anode, Cathode

Cathode, Anode

Emitter

Collector

1. 3. 5. 7.

2. 4. 6. 8.

9. 11. 13. 15.

10. 12. 14. 16.

12345678

16151413121110 9

PS2805-4

PS2805-1

(Top View)

PIN CONNECTION

<R>

PS2805-1, PS2805-4e

R08DS0095EJ0400 Rev.4.00 Page 2 of 14

Jan 23, 2013

PACKAGE DIMENSIONS (UNIT: mm)

0.12

0.4±0.1

1.27

2.0±0.1

0.1±0.1

PS2805-1 PS2805-4

4.4

7.0±0.3

0.5±0.3

0.15+0.10

–0.05

2.7±0.3 10.3±0.3

4.4

7.0±0.3

0.5±0.3

0.15+0.10

–0.05

1.27

2.0+0.3

–0.2

0.1±0.1

0.12

0.40

+0.10

–0.05

PHOTOCOUPLER CONSTRUCTION

Parameter Unit (MIN.)

Air Distance 4.5 mm

Outer Creepage Distance 4.5 mm

Inner Creepage Distance 2.5 mm

Isolation Distance 0.1 mm

<R>

PS2805-1, PS2805-4e

R08DS0095EJ0400 Rev.4.00 Page 3 of 14

Jan 23, 2013

MARKING EXAMPLE

PS2805-1

Made in Taiwan

Made in Japan

" " (Square)

:Made in Japan

Week Assembled

Year Assembled (Last 1 digit)

Last 1 number of type

No. : 5

Assembly Lot

301

Company initial

PS2805-4

Country Assembled

Assembly Lot

No. 1 pin

Mark

PS2805-4

NL301

301

Year Assembled

(Last 1 Digit)

Rank Code

In-house Code

(L: Pb-Free)

Week Assembled

<R>

PS2805-1, PS2805-4e

R08DS0095EJ0400 Rev.4.00 Page 4 of 14

Jan 23, 2013

ORDERING INFORMATION

Part Number Order Number Solder Plating

Specification etc. Packing Style Safety Standard

Approval

Application

Part Number*1

PS2805-1-F3 PS2805-1-F3-A Embossed Tape 3 500 pcs/reel Standard products

(UL, BSI, CSA

approved)

PS2805-1-V-F3 PS2805-1-V-F3-A Embossed Tape 3 500 pcs/reel DIN EN 60747-5-5

(VDE 0884-5)

Approved (Option)

PS2805-1

PS2805-4-F3 PS2805-4-F3-A Embossed Tape 2 500 pcs/reel Standard products

(UL, BSI, CSA

approved)

PS2805-4-V-F3 PS2805-4-V-F3-A

Pb-Free

Embossed Tape 2 500 pcs/reel DIN EN 60747-5-5

(VDE 0884-5)

Approved (Option)

PS2805-4

Note: *1. For the application of the Safety Standard, following part number should be used.

ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)

Ratings

Parameter Symbol PS2805-1 PS2805-4 Unit

Forward Current (DC) IF ± 50 mA/ch

Power Dissipation Derating

PD/°C 0.6 0.8 mW/°C

Power Dissipation PD 60 80 mW/ch

Diode

Peak Forward Current *1 I

FP ± 1 A/ch

Collector to Emitter Voltage VCEO 80 V

Emitter to Collector Voltage VECO 6 V

Collector Current IC 50 mA/ch

Power Dissipation Derating

PC/°C 1.2 mW/°C

Transistor

Power Dissipation PC 120 mW/ch

Isolation Voltage *2 BV 2 500 Vr.m.s.

Operating Ambient Temperature TA −55 to +100 °C

Storage Temperature Tstg −55 to +150 °C

Notes: *1. PW = 100

s, Duty Cycle = 1%

*2. AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.

Pins 1-2 shorted together, 3-4 shorted together (PS2805-1).

Pins 1-8 shorted together, 9-16 shorted together (PS2805-4).

<R>

PS2805-1, PS2805-4e

R08DS0095EJ0400 Rev.4.00 Page 5 of 14

Jan 23, 2013

ELECTRICAL CHARACTERISTICS (TA = 25°C)

Parameter Symbol Conditions MIN. TYP. MAX. Unit

Forward Voltage VF I

F = ±5 mA 1.1 1.4 V Diode

Terminal Capacitance Ct V = 0 V, f = 1.0 MHz 30 pF

Transistor Collector to Emitter

Dark Current ICEO V

CE = 80 V, IF = 0 mA 100 nA

Current Transfer Ratio

(IC/IF) *1 CTR IF = ±5 mA, VCE = 5 V 80 600 %

CTR Ratio *1 CTR1/

CTR2

IF = 5 mA, VCE = 5 V 0.3 1.0 3.0

Collector Saturation

Voltage VCE (sat) I

F = ±10 mA, IC = 2 mA 0.3 V

Isolation Resistance RI-O V

I-O = 1.0 kVDC 1011 Ω

Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.4 pF

Rise Time *2 t

r 3

Fall Time *2 t

f 5

Turn-on Time *2 t

on 6

Coupled

Turn-off Time *2 t

off

VCC = 5 V, IC = 2 mA, RL = 100 Ω

Notes: *1. CTR1 = IC1/IF1, CTR2 = IC2/IF2

*2. Test circuit for switching time

Pulse Input V

50 ΩR

= 100 Ω

OUT

PW = 100 s

Duty Cycle = 1/10

Input

Output

90%

10%

off

<R>

PS2805-1, PS2805-4e

R08DS0095EJ0400 Rev.4.00 Page 6 of 14

Jan 23, 2013

TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)

25 50 75 100

PS2805-4

PS2805-1

0.8 mW/˚C

0.6 mW/˚C

25 50 75 100

100

Ambient Temperature T

(˚C)

Diode Power Dissipation P

(mW)

DIODE POWER DISSIPATION vs.

AMBIENT TEMPERATURE

PS2805-1

PS2805-4

1.2 mW/˚C

Ambient Temperature T

(˚C)

Transistor Power Dissipation P

(mW)

TRANSISTOR POWER DISSIPATION

vs. AMBIENT TEMPERATURE

120

100

0.1

100

0.5

0.7 0.9 1.1 1.40.8 1.0 1.2 1.3 1.5

Forward Voltage V

(V)

Forward Current I

(mA)

FORWARD CURRENT vs.

FORWARD VOLTAGE

= +100˚C

+60˚C

+25˚C

0˚C

–25˚C

–55˚C

100

10 000

1 000

–50 –25 0100

25 50 75

Collector to Emitter Dark Current I

CEO

(nA)

Ambient Temperature T

(˚C)

COLLECTOR TO EMITTER DARK

CURRENT vs. AMBIENT TEMPERATURE

= 80 V

40 V

24 V

10 V

5 V

–1.0–1.5 0–0.5 0.5 1.51.0

–40

–80

–60

–20

Forward Current I

(mA)

Forward Voltage V

(V)

FORWARD CURRENT vs.

FORWARD VOLTAGE

1 mA

= 50 mA

20 mA

10 mA

2 mA

0.5

0.1

0.0 0.2 1.0

0.4 0.6 0.8

Collector Saturation Voltage V

CE(sat)

(V)

Collector Current I

(mA)

COLLECTOR CURRENT vs.

COLLECTOR SATURATION VOLTAGE

Remark The graphs indicate nominal characteristics.

<R>

PS2805-1, PS2805-4e

R08DS0095EJ0400 Rev.4.00 Page 7 of 14

Jan 23, 2013

Normalized to 1.0

at TA = 25˚C,

IF = 5 mA, VCE = 5 V

–50 0100

–25 25 50 75

0.6

1.2

0.2

0.4

1.0

0.8

Ambient Temperature TA (˚C)

Normalized Current Transfer Ratio CTR

NORMALIZED CURRENT TRANSFER

RATIO vs. AMBIENT TEMPERATURE

VCC = 5 V,

IC = 2 mA,

CTR = 236%

0.01 0.05 0.1 0.5 1510

0.1

100

0.5

Load Resistance RL (kΩ)

Switching Time t ( s)

SWITCHING TIME vs.

LOAD RESISTANCE

VCC = 5 V,

IF = 5 mA,

CTR = 236%

110 100

0.1

100

1 000

Load Resistance RL (kΩ)

Switching Time t ( s)

SWITCHING TIME vs.

LOAD RESISTANCE

42 8

610

Collector to Emitter Voltage VCE (V)

Collector Current IC (mA)

COLLECTOR CURRENT vs.

COLLECTOR TO EMITTER VOLTAGE

5 mA

50 mA

10 mA

20 mA

0.02 100

0.1 1.0 10

100

200

150

250

300

Forward Current IF (mA)

Current Transfer Ratio CTR (%)

CURRENT TRANSFER RATIO vs.

FORWARD CURRENT

VCE = 5 V,

n = 3

Sample A

FREQUENCY RESPONSE

Frequency f (kHz)

Normalized Gain Gv

–10

–20

–15

–5

0.5 210 20 500

1 5 50 100 200

= 5 mA,

= 5 V

= 1 k

100

300

Remark The graphs indicate nominal characteristics.

PS2805-1, PS2805-4e

R08DS0095EJ0400 Rev.4.00 Page 8 of 14

Jan 23, 2013

TAPING SPECIFICATIONS (UNIT: mm)

Outline and Dimensions (Reel)

Packing: 3 500 pcs/reel

2.0±0.5

R 1.0

13.0±0.2

21.0±0.8

Tape Direction

PS2805-1-F3

Outline and Dimensions (Tape)

1.55±0.1

4.0±0.1

2.0±0.1

4.0±0.1

1.75±0.1

2.8 MAX.

7.55±0.1

0.3

7.5±0.1

16.0±0.3

2.85±0.1 2.3±0.1

1.5

+0.1

–0

330±2.0

100±1.0

2.0±0.5

15.9 to 19.4

Outer edge of

flange

21.5±1.0

17.5±1.0

301

<R>

PS2805-1, PS2805-4e

R08DS0095EJ0400 Rev.4.00 Page 9 of 14

Jan 23, 2013

Tape Direction

PS2805-4-F3

Outline and Dimensions (Reel)

Packing: 2 500 pcs/reel

2.0±0.5

R 1.0

13.0±0.2

21.0±0.8

Outline and Dimensions (Tape)

1.55±0.1

12.0±0.1

2.0±0.1

4.0±0.1

1.75±0.1

16.0±0.3

8.3±0.1

2.8 MAX.

10.7±0.1

0.3

2.3±0.1

7.5±0.1

1.5

+0.1

–0

330±2.0

100±1.0

2.0±0.5

15.9 to 19.4

Outer edge of

flange

21.5±1.0

17.5±1.0

<R>

PS2805-1, PS2805-4e

R08DS0095EJ0400 Rev.4.00 Page 10 of 14

Jan 23, 2013

RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)

0.8

1.27

1.45

6.25

Remark All dimensions in this figure must be evaluated before use.

<R>

PS2805-1, PS2805-4e

R08DS0095EJ0400 Rev.4.00 Page 11 of 14

Jan 23, 2013

NOTES ON HANDLING

1. Recommended soldering conditions

(1) Infrared reflow soldering

• Peak reflow temperature 260°C or below (package surface temperature)

• Time of peak reflow temperature 10 seconds or less

• Time of temperature higher than 220°C 60 seconds or less

• Time to preheat temperature from 120 to 180°C 120±30 s

• Number of reflows Three

• Flux Rosin flux containing small amount of chlorine (The

flux with a maximum chlorine content of 0.2 Wt% is

recommended.)

120±30 s

(preheating)

220°C

180°C

Package Surface Temperature T (°C)

Time (s)

Recommended Temperature Profile of Infrared Reflow

(heating)

to 10 s

to 60 s

260°C MAX.

120°C

(2) Wave soldering

• Temperature 260°C or below (molten solder temperature)

• Time 10 seconds or less

• Preheating conditions 120°C or below (package surface temperature)

• Number of times One (Allowed to be dipped in solder including plastic

mold portion.)

• Flux Rosin flux containing small amount of chlorine (The flux

with a maximum chlorine content of 0.2 Wt% is

recommended.)

(3) Soldering by Soldering Iron

• Peak Temperature (lead part temperature) 350°C or below

• Time (each pins) 3 seconds or less

• Flux Rosin flux containing small amount of chlorine (The flux

with a maximum chlorine content of 0.2 Wt% is

recommended.)

(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead

(4) Cautions

• Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

<R>

PS2805-1, PS2805-4e

R08DS0095EJ0400 Rev.4.00 Page 12 of 14

Jan 23, 2013

2. Cautions regarding noise

Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-

emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum

ratings.

3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler

Check the setting values before use, since the forward current conditions at CTR measurement differ according to

product.

When using products other than at the specified forward current, the characteristics curves may differ from the

standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below

IF = 1 mA.

Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like

into consideration before use.

USAGE CAUTIONS

1. Protect against static electricity when handling.

2. Avoid storage at a high temperature and high humidity.

PS2805-1, PS2805-4e

R08DS0095EJ0400 Rev.4.00 Page 13 of 14

Jan 23, 2013

SPECIFICATION OF VDE MARKS LICENSE DOCUMENT

Parameter Symbol Spec. Unit

Climatic test class (IEC 60068-1/DIN EN 60068-1) 55/100/21

Dielectric strength

maximum operating isolation voltage

Test voltage (partial discharge test, procedure a for type test and random test)

Upr = 1.6 × UIORM, Pd < 5 pC

UIORM

Upr

705

1 128

Vpeak

Test voltage (partial discharge test, procedure b for all devices)

Upr = 1.875 × UIORM, Pd < 5 pC

Upr 1 322 Vpeak

Highest permissible overvoltage UTR 6 000 Vpeak

Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) 2

Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) CTI 175

Material group (DIN EN 60664-1 VDE0110 Part 1) III a

Storage temperature range Tstg −55 to +150 °C

Operating temperature range TA −55 to +100 °C

Isolation resistance, minimum value

VIO = 500 V dc at TA = 25°C

VIO = 500 V dc at TA MAX. at least 100°C

Ris MIN.

1012

1011

Safety maximum ratings (maximum permissible in case of fault, see thermal

derating curve)

Package temperature

Current (input current IF, Psi = 0)

Power (output or total power dissipation)

Isolation resistance

VIO = 500 V dc at TA = Tsi

Tsi

Isi

Psi

Ris MIN.

150

300

500

109

°C

<R>

PS2805-1, PS2805-4e

R08DS0095EJ0400 Rev.4.00 Page 14 of 14

Jan 23, 2013

Caution GaAs Products This product uses gallium arsenide (GaAs).

GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe

the following points.

• Follow related laws and ordinances when disposing of the product. If there are no applicable laws

and/or ordinances, dispose of the product as recommended below.

1. Commission a disposal company able to (with a license to) collect, transport and dispose of

materials that contain arsenic and other such industrial waste materials.

2. Exclude the product from general industrial waste and household garbage, and ensure that the

product is controlled (as industrial waste subject to special control) up until final disposal.

• Do not burn, destroy, cut, crush, or chemically dissolve the product.

• Do not lick the product or in any way allow it to enter the mouth.

All trademarks and registered trademarks are the property of their respective owners.

C - 1

Revision History PS2805-1, PS2805-4 Data Sheet

Description

Rev. Date Page Summary

1.00 Mar 31, 2003 − This data sheet was released as PN10253EJ01V0DS

4.00 Jan 23, 2013 Throughout Renesas format is applied to this data sheet.

p.1 The ordering number and safety standards are revised.

p.2

PHOTOCOUPLER CONSTRUCTION is added as each distance of this

device.

p.3 The explanation in MARKING EXAMPLE is revised.

p.4

ORDERING INFORMATION is modified with the revision of the safety

standards.

p.5

Turn-on Time (ton) and Turn-off Time (toff) are added to the table in

ELECTRICAL CHARACTERISTICS.

The switching time chart is added to the notes in ELECTRICAL

CHARACTERISTICS.

p.6 The graph of LONG TERM CTR DEGRADATION is deleted from those in

TYPICAL CHARACTERISTICS.

p.8

PS2805-1-F4 is deleted form Tape Direction image in TAPING

SPECIFICATIONS.

p.9 PS2805-4-F4 is deleted form Tape Direction image in TAPING

SPECIFICATIONS.

p.10 RECOMMENDED MOUNT PAD DIMENSIONS is added.

p.11

The note about temperature condition of the recommended soldering

conditions is deleted.

p.12 PROGRAMME LOGIC CONTROLLERS EXAMPLE is deleted.

P13 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT is added.

Notice

1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for

the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the

use of these circuits, software, or information.

2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics

assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.

3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or

technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or

others.

4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or

third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product.

5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on

the product's quality grade, as indicated below.

"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic

equipment; and industrial robots etc.

"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc.

Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical

implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it

in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses

incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics.

6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage

range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the

use of Renesas Electronics products beyond such specified ranges.

7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and

malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the

possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to

redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,

please evaluate the safety of the final products or systems manufactured by you.

8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics

products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes

no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.

9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or

regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the

development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and

regulations and follow the procedures required by such laws and regulations.

10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the

contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics

products.

11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.

12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.

(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.

(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.

htt

://www.renesas.co

Refer to "htt

://www.renesas.com/" for the latest and detailed information

California Eastern Laboratories

Inc.

4590 Patrick Henr

Drive, Santa Clara, California 95054, U.S.A

Tel: +1-408-919-2500, Fax: +1-408-988-0279

Renesas Electronics Europe Limited

Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K

Tel: +44-1628-651-700, Fax: +44-1628-651-804

Renesas Electronics Europe GmbH

Arcadiastrasse 10, 40472 Düsseldorf, Germany

Tel: +49-211-65030, Fax: +49-211-6503-1327

Renesas Electronics (China) Co., Ltd.

7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China

Tel: +86-10-8235-1155, Fax: +86-10-8235-7679

Renesas Electronics (Shanghai) Co., Ltd.

Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China

Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898

Renesas Electronics Hong Kong Limited

Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong

Tel: +852-2886-9318, Fax: +852 2886-9022/9044

Renesas Electronics Taiwan Co., Ltd.

13F, No. 363, Fu Shing North Road, Taipei, Taiwan

Tel: +886-2-8175-9600, Fax: +886 2-8175-9670

Renesas Electronics Singapore Pte. Ltd.

80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre Singapore 339949

Tel: +65-6213-0200, Fax: +65-6213-0300

Renesas Electronics Malaysia Sdn.Bhd.

Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia

Tel: +60-3-7955-9390, Fax: +60-3-7955-9510

Renesas Electronics Korea Co.

Ltd

11F., Samik Lavied' or Bld

., 720-2 Yeoksam-Don

, Kan

nam-Ku, Seoul 135-080, Korea

Tel: +82-2-558-3737

Fax: +82-2-558-514

ALE

FFI

2012 Renesas Electronics Corporation. All ri

hts reserved

[

Colo

hon 2.2

]