432702590701 - Ferroxcube - Datasheet.Directory

SPECIFICATION

MODEL LPV-60-5 LPV-60-12 LPV-60-15 LPV-60-24 LPV-60-36 LPV-60-48

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER

OUTPUT

LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME Note.6

HOLD UP TIME (Typ.)

VOLTAGE RANGE Note.4

FREQUENCY RANGE

EFFICIENCY (Typ.)

AC CURRENT (Typ.)

INPUT

INRUSH CURRENT(Typ.)

LEAKAGE CURRENT

SAFETY STANDARDS

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSIONOTHERS

NOTE

PACKING

OVER LOAD

OVER VOLTAGE

5V 12V 15V 24V 36V 48V

8A 5A 4A 2.5A 1.67A 1.25A

0 ~ 8A 0 ~ 5A 0 ~ 4A 0 ~ 2.5A 0 ~ 1.67A 0 ~ 1.25A

40W 60W 60W 60W 60W 60W

80mVp-p 120mVp-p 120mVp-p 150mVp-p 150mVp-p 150mVp-p

±8.0%

±1.0%

±6.0%

90 ~ 264VAC 127 ~ 370VDC

47 ~ 63Hz

76% 83%

±2.0%

±5.0%

83% 86% 86% 86%

5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 41.4 ~ 48.6V 55.2 ~ 64.8V

1.2A/115VAC 1A/230VAC

COLD START 60A(twidth=525 s measured at 50% Ipeak) at 230VACμ

0.25mA / 240VAC

110 ~ 150% rated output power

Protection type : Hiccup mode, recovers automatically after fault condition is removed

Compliance to EN55032 (CISPR32) Class B, EN61000-3-2 Class A, EN61000-3-3, EAC TP TC 020

Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A, EAC TP TC 020

-30 ~ +70 (Refer to "Derating Curve")℃

20 ~ 90% RH non-condensing

-40 ~ +80 , 10 ~ 95% RH℃

±℃ ℃0.03%/ (0 ~ 50 )

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

732Khrs min. MIL-HDBK-217F (25 )℃

162.5*42.5*32mm (L*W*H)

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Derating may be needed under low input voltage. Please check the static characteristics for more details.

5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the

complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.

7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.

8. Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minute.

9. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

10.Products sourced from the Americas regions may not have the BIS logo. Please contact your MEAN WELL sales for more information.

11. For any application note and IP water proof function installation caution, please refer our user manual before using.

https://www.meanwell.com/Upload/PDF/LED_EN.pdf

0.4Kg; 32pcs/13.8Kg/0.56CUFT

Protection type : Shut down o/p voltage, re-power on to recover

60W Single Output Switching Power Supply

■Features :

LPV-60 series

RIPPLE & NOISE (max.) Note.2

VOLTAGE TOLERANCE Note.3

ENVIRONMENT

SAFETY &

EMC

PROTECTION

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

I/P-O/P:3KVAC

I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH℃

File Name:LPV-60-SPEC 2019-01-25

Constant voltage design

Universal AC input / Full range

Withstand 300VAC surge input for 5 seconds

Protections: Short circuit / Over load / Over voltage

Cooling by free air convection

Fully encapsulated with IP67 level (Note.8)

Fully isolated plastic case

ⅡClass power unit, no FG

Class 2 power unit

ass LPSP

Suitable for LED related fixture or appliance

(such as LED Decoration or Advertisement devices)(Note.7)

100% full load burn-in test

Low cost, high reliability

2 years warranty

500ms, 20ms / 230VAC 500ms, 20ms / 115VAC at full load(for 5~36V) ; 500ms, 30ms / 230VAC 500ms, 30ms / 115VAC at full load(for 48V)

50ms/230VAC 16ms/115VAC at full load

EMC IMMUNITY

EMC EMISSION

IP67

MAX. No. of PSUs on 16A

CIRCUIT BREAKER 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC

LPS

(except for 5V) (for 48V only) (except for 5V,48V)

IS 15885(Part 2/Sec13)

R-41027766

THOMAS SAMUEL

(for 12V,24V only)

UL879(except for LPV-60-5), UL1310(except for LPV-60-5), CSA C22.2 No. 207-M89(except for LPV-60-5, LPV-60-48),

CAN/CSA C22.2 No. 223-M91(except for LPV-60-5,LPV-60-48), BIS IS15885(for LPV-60-12,LPV-60-24 only),

EAC TP TC 004, IP67, IEC60950-1:2005+A2:2013 approved ; design refer to TUV EN60950-1