T-1 (3mm) RIGHT ANGLE LED INDICATOR Part Number: WP130WDT/EGW High Efficiency Red Green Features Description z Pre-trimmed leads for pc board mounting. The High Efficiency Red source color devices are made with z 3 leads with common lead. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Black case enhances contrast ratio. Light Emitting Diode. z Housing UL rating:94V-0. The Green source color devices are made with Gallium z Housing material: type 66 nylon. Phosphide Green Light Emitting Diode. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF1530 REV NO: V.8A DATE: JAN/24/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102000189 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Viewing Angle [1] Min. Typ. 21/2 12 30 *10 *24 12 30 *12 *30 Units Test Conditions High Efficiency Red (GaAsP/GaP) WP130WDT/EGW White Diffused 60 Green (GaP) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. peak Peak Wavelength High Efficiency Red Green 627 565 nm IF=20mA D [1] Dominant Wavelength High Efficiency Red Green 617 568 nm IF=20mA 1/2 Spectral Line Half-width High Efficiency Red Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Green 15 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Green 2 2.2 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Electrostatic Discharge Threshold (HBM) 8000 8000 V Reverse Voltage 5 Operating / Storage Temperature V -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF1530 REV NO: V.8A DATE: JAN/24/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102000189 WP130WDT/EGW High Efficiency Red SPEC NO: DSAF1530 REV NO: V.8A DATE: JAN/24/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102000189 Green SPEC NO: DSAF1530 REV NO: V.8A DATE: JAN/24/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102000189 PACKING & LABEL SPECIFICATIONS WP130WDT/EGW SPEC NO: DSAF1530 REV NO: V.8A DATE: JAN/24/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102000189 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAF1530 REV NO: V.8A DATE: JAN/24/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102000189