12 11 10 9 7 8 5 6 4 REF. +0.20 2.40 -0.10 .094 +.008 -.004 SEE NOTE 8 G CL OF CLIP F 2 1 1) MATERIALS: HOUSING: PA46 FILLED, UL94V-0, COLOR: BLACK TERMINAL: BRASS BOARD RETENTION CLIP: BRASS 2) FINISHES: TERMINAL: 1 = (0.00254)/.000100 MIN. BRIGHT TIN OVER (0.00127)/.000050 MIN. NICKEL 2 = (0.00076)/.000030 MIN. SELECT GOLD AND (0.00254)/.000100 MIN. SELECT MATTE TIN OVER (0.00127)/.000050 MIN. NICKEL OVERALL MOUNTING CLIP: (0.00254)/.000100 MIN. MATTE TIN OVER (0.00127)/.000050 MIN. NICKEL 3) PRODUCT SPECIFICATIONS: PS-43810-001 4) PACKAGING SPECIFICATIONS: PK-43879-001 5) PART MATES WITH MOLEX RECEPTACLE SERIES 5557, 42474 AND 44516 AND HEADER SERIES 42385. 6) PART ALLOWS FOR 1.27/.050 MAX. MISALIGNMENT WITH MATING HOUSINGS IN ANY DIRECTION. 7) CONNECTOR ASSEMBLIES ARE NOT TO BE MATED AND UNMATED WHILE CIRCUITS ARE LIVE. 8 THIS DIMENSION DOES NOT APPLY TO PARTS WITHOUT P.C. BOARD RETENTION CLIPS. 9) PARTS CONFORM TO CLASS 'B' REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 10) DISCOLORATION IN THE BANDOLIER CARRIER AREA OF THE PIN IS INHERENT TO THE PLATING PROCESS AND IS DUE TO THE MASKING EFFECT OF THE CARRIER. THIS DISCOLORATION IS IN A NON-FUNCTIONAL AREA OF THE PIN AND WILL NOT AFFECT THE PERFORMANCE OF THE HEADER ASSEMBLY. 11) PARTS ARE NOT DESIGNED FOR CURRENT SHARING. 12) TEXT ON PART IS FOR REFERENCE ONLY. TEXT AND TEXT LOCATION MAY VARY DEPENDING ON PART 8 NUMBER AND/OR TOOL. 0.50 .020 SEE NOTE 8 H 3 8 SEE NOTE 8 E D H G F E D 8 C C 8 8 B B = 0 = 0 = 0 FORMAT: Eng-lega-master-tb-prod-C REVISION: C DATE: 2016/02/04 12 C RELEASE DATE 11 10 9 8 7 6 = 0 = 0 = 0 G2 5 REV RELEASE STATUS 0 EC NO: DRWN: CHK'D: APPR: = A 116383 BAPPELDORN JBELL FSMITH 0 RELEASE 8CKT = 2017/04/28 2017/05/03 2017/05/05 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS GENERAL TOLERANCES (UNLESS SPECIFIED) MM/IN INCH MM 4:1 DRWN BY DATE 4 PLACES MANLAPAZ 3 PLACES 0.01 CHK'D BY 2 PLACES 0.25 0.014 BANDURA 1 PLACES 0.35 APPR BY 0 PLACES FSMITH ANGULAR TOL 0.5 DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 MINI-FIT JR BMI SMC VERTICAL HEADER ASM VARIOUS BOARD THICKNESS 1997/12/04 DATE 1997/12/06 DATE PRODUCT CUSTOMER DRAWING 2012/02/02 THIRD ANGLE PROJECTION C MATERIAL NUMBER SERIES 44068 SEE SHEET 2 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER DOCUMENT NUMBER SD-44068-031 3 CUSTOMER 2 PSD 1 OF 2 000 1 A 12 H 11 10 9 8 7 5 6 4 3 1 (SEE NOTE 2) 1 (SEE NOTE 2) 1 (SEE NOTE 2) 1 (SEE NOTE 2) (3.30) REF. .130 (1.790.25) .070.010 (3.30) REF. .130 (2.600.25) .102.010 (4.50) REF. .177 (3.390.25) .133.010 (4.90) REF. .193 (1.600.18) .063.007 (1.600.18) .063.007 (2.390.18) .094.007 (3.180.18) .125.007 2 1 H G G F F 2 (SEE NOTE 2) 2 (SEE NOTE 2) 2 (SEE NOTE 2) 2 (SEE NOTE 2) (3.30) REF. .130 (1.790.25) .070.010 (3.30) REF. .130 (2.600.25) .102.010 (4.50) REF. .177 (3.390.25) .133.010 (4.90) REF. .193 (1.600.18) .063.007 (1.600.18) .063.007 (2.390.18) .094.007 (3.180.18) .125.007 E E D D C C B B = 0 = 0 = 0 FORMAT: Eng-lega-master-tb-prod-C REVISION: C DATE: 2016/02/04 12 C RELEASE DATE 11 10 9 8 7 6 = 0 = 0 = 0 G2 5 REV RELEASE STATUS 0 EC NO: DRWN: CHK'D: APPR: = A 116383 BAPPELDORN JBELL FSMITH 0 RELEASE 8CKT = 2017/04/28 2017/05/03 2017/05/05 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS GENERAL TOLERANCES (UNLESS SPECIFIED) MM/IN INCH MM 1:1 DRWN BY DATE 4 PLACES MANLAPAZ 3 PLACES 0.01 CHK'D BY 2 PLACES 0.25 0.014 BANDURA 1 PLACES 0.35 APPR BY 0 PLACES FSMITH ANGULAR TOL 0.5 DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 MINI-FIT JR BMI SMC VERTICAL HEADER ASM VARIOUS BOARD THICKNESS 1997/12/04 DATE 1997/12/06 DATE PRODUCT CUSTOMER DRAWING 2012/02/02 THIRD ANGLE PROJECTION C MATERIAL NUMBER SERIES 44068 SEE SHEET 2 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER DOCUMENT NUMBER SD-44068-031 3 CUSTOMER 2 PSD 2 OF 2 000 1 A