ALTERNATE ACTION PUSHBUTTONS
ALTERNATE
ACTION
P5
119 OTTO Full Line Catalog Specifications Subject To Change Without Notice
SEALED AGAINST DUST & MOISTURE
The P5 Alternate Action switches match the P1, P3 and P8
Momentary Action Pushbutton models for mixed function
with common panel appearance. Now you can design panels
with both alternate and momentary action switches and have
uniform panel appearance. The P5 features alternate action
in the same pushbutton and housing configuration as the
momentary P1 and P3 and as a bonus, the P5 requires less
behind the panel space than the P1 and P3 momentary versions.
Push and the P5 switch turns “on.” Push again and the P5 switch
turns “off.” Positive tactile feedback is featured so the operator
is clearly aware the switch mode has been executed. The button
returns to the original position after each actuation.
To guard against front panel splash and dirt, the P5 series
is sealed at the button with OTTO’s patented “rolling
sleeve”principle. The terminals are sealed with epoxy, providing
a seal against flux during wiring and behind panel dirt and
moisture. The combination of sealing provides smooth operation
over a wide temperature range. Watertight sealing to IP68S is
available.
A vandal resistant style is available in the P5-V series. Custom
housings, shrouded buttons, contact configurations and
materials are available to suit your application requirements. We
also provide custom button engraving with epoxy ink backfill,
watertight versions and other special characteristics.
Features:
• Buttonsealedwithpatented“rollingsleeve”principle
• Contactareasealedatcase&terminals
• Moistureproof&dusttighttoIP64&MIL-PRF-8805
Design2orwatertighttoIP68S
• Lessthan25mΩcontactresistance
• Handleslowlevelupto10amps
• Varietyofmountingstyles
• Engravedbuttonsavailable
• Choiceof9button&3bezelcolors
• PanelappearancematchesmostotherOTTO
momentarypushbuttonswitches
• Unsealedconstructionalsoavailable
• RoHS/WEEE/Reachcompliant
“PushOn,PushOff”action
Style P5-3
Style P5-1
Style P5-4
Style P5-6
StandardCharacteristics/Ratings:
ELECTRICALRATINGS:
Load SeaLevel@28VDC
or115VAC,60/400Hz
Resistive 10A
Inductive 5A
Lamp 1A
Motor 3A
DWV 1050Vrms
Low Level 10mA @ 30mV
ElectricalLife: 25,000 cycles
MechanicalLife: 1,000,000 cycles
Seal: IP64 & MIL-PRF-8805 Design 2 or IP68S
OperatingTempRange: -55°C to +85°C
OperatingForce: 3.0 lbs. +1/-0.5 lb.
TotalTravel: 0.180 inches max
Overtravel: 0.012 inches min
MATERIALS:
Case: Anodized aluminum alloy
Button: Thermoplastic
Terminals: Brass, silver plate or gold plate for low level
TerminalHardware: Terminal lugs, lockwasher and screw for screw terminal option
MountingHardware: Hex nut, lockwasher and panel seal on watertight switches