2N2920AHR Hi-Rel NPN dual matched bipolar transistor 60 V, 0.03 A Datasheet -- production data Features BVCEO 60 V IC (max) 0.03 A HFE at 10 V - 150 mA > 300 Operating temperature range -65C to +200C Hi-Rel NPN dual matched bipolar transistor Linear gain characteristics ESCC qualified European preferred part list - EPPL Radiation level: lot specific total dose contact marketing for specified level LCC-6 TO-77 Figure 1. Internal schematic diagram Description The 2N2920AHR is a silicon planar epitaxial NPN transistor in TO-77 and LCC-6 packages. It is specifically designed for aerospace Hi-Rel applications and ESCC qualified according to the 5207-002 specification. In case of conflict between this datasheet and ESCC detailed specification, the latter prevails. Table 1. Device summary Order codes Packages Lead finish Marking Type 2N2920AHR TO-77 Gold Solder Dip 520700203 520700206 ESCC Flight Strip pack 2N2920AT1 TO-77 Gold 2N2920AT1 Engineering model Strip pack SOC2920A LCC-6 Gold SOC2920A Engineering model Waffle pack SOC2920AHRB LCC-6 Gold Solder Dip 520700212 520700215 ESCC Flight November 2012 This is information on a product in full production. Doc ID 15383 Rev 3 EPPL Yes Packaging Waffle pack 1/10 www.st.com 10 Electrical ratings 1 2N2920AHR Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCBO Collector-base voltage (IE = 0) 60 V VCEO Collector-emitter voltage (IB = 0) 60 V VEBO Emitter-base voltage (IC = 0) 6 V Collector current 30 mA 0.3 0.5 0.6 1 W W W W 0.75 1.25 W W -65 to 200 C 200 C IC PTOT TSTG TJ Total dissipation at Tamb 25 C for SOC2920A (1) for SOC2920A (2) for 2N2920AHR (1) (3) for 2N2920AHR (2) (3) Total dissipation at Tc 25 C for SOC2920A (1) for SOC2920A (2) Storage temperature Max. operating junction temperature 1. One section. 2. Both sections. 3. When mounted on a 15 x 15 x 0.6 mm ceramic substrate. Table 3. Thermal data for through-hole package Symbol Parameter RthJC Thermal resistance junction-case (1) Thermal resistance junction-case (2) RthJA Thermal resistance junction-ambient (1) Thermal resistance junction-ambient (2) __ __ __ __ Value Unit max max 233 140 C/W C/W max max 583 350 C/W C/W Value Unit 291 175 C/W C/W 1. One section. 2. Both sections. Table 4. Thermal data for SMD package Symbol RthJA Parameter Thermal resistance junction-ambient (1)(3) __ Thermal resistance junction-ambient (2)(3) __ 1. One section. 2. Both sections. 3. When mounted on a 15 x 15 x 0.6 mm ceramic substrate. 2/10 Doc ID 15383 Rev 3 max max 2N2920AHR 2 Electrical characteristics Electrical characteristics Tcase = 25 C unless otherwise specified Table 5. Electrical characteristics Symbol Parameter Max. Unit ICBO Collector-base cut-off current (IE = 0) VCB = 45 V VCB = 45 V 2 10 nA A ICEO Collector cut-off current (IB = 0) VCE = 5 V 2 nA IEBO Emitter-base cut-off current (IC = 0) VEB = 5 V 2 nA V(BR)CBO Collector-base breakdown voltage (IE = 0) IC = 10 A 60 V V(BR)CEO (1) Collector-emitter breakdown voltage (IB = 0) IC = 10 mA 60 V V(BR)EBO Emitter-base breakdown voltage (IC = 0) IE = 10 A 6 V VCE(sat) (1) Collector-emitter saturation voltage IC = 1 mA IB = 0.1 mA VBE(sat) (1) Base-emitter saturation voltage IC = 1 mA IB = 0.1 mA DC current gain IC = 10 A IC = 100 A IC = 1 mA IC = 10 A Tamb = -55 C VCE = 5 V VCE = 5 V VCE = 5 V VCE = 5 V hFE (1) Test conditions Min. TC = 150 C Typ. 0.35 V 0.5 1 V 150 225 300 600 50 hFE2-1 / hFE2-2 DC current transfer ratio comparison VCE = 5 V IC = 100 A Tamb = -55 C to +25 C 0.91 1.1 hFE2-1 / hFE2-2 DC current transfer ratio comparison VCE = 5 V IC = 100 A Tamb = -55 C to +125 C 0.85 1.18 VBE1 - Base-emitter voltage differential VCE = 5 V VCE = 5 V VCE = 5 V IC = 10 A IC = 100 A IC = 1 mA 2 1.5 2 mV mV mV VBE1 - Base-emitter voltage differential VCE = 5 V IC = 100 A Tamb = -55 C to +25 C Tamb = +25 C to +125 C 0.4 0.5 mV mV Leakage current between active devices V = 50 V to E2, B2, C2 V = 0 V to E1, B1, C1 5 A VBE2 VBE2 ILk Doc ID 15383 Rev 3 3/10 Electrical characteristics Table 5. Symbol fT 2N2920AHR Electrical characteristics (continued) Parameter Test conditions Transition frequency IC = 0.5 mA hob Output admittance VCE = 5 V f = 1 kHz IC = 1 mA hib Input impedance VCB = 5 V f = 1 kHz IC = 1 mA Output capacitance (IE = 0) Cobo NF NF Typ. Max. 60 Unit MHz 1 mho 32 W VCB = 5 V 100 kHz f 1 MHz 6 pF Noise figure VCE = 5 V IC = 10 A RS = 10 k f = 1 kHz Bandwidth = 200 Hz 3 dB Noise figure VCE = 5 V IC = 10 A RS = 10 k 10 Hz f 15.7 kHz Bandwidth = 200 Hz 3 dB 1. Pulsed duration = 300 s, duty cycle 1.5% 4/10 VCE = 5 V Min. Doc ID 15383 Rev 3 25 2N2920AHR Electrical characteristics 2.1 Electrical characteristics (curves) Figure 2. hFE @ VCE = 5 V Figure 3. VCE(sat) @ hFE =10 AM16342v1 AM16343v1 0.16 1000 0.14 TJ=-55C TJ=-40C TJ=25C 0.12 TJ=110C TJ=125C 0.10 0.08 0.06 100 0.0001 Figure 4. TJ=-55C TJ=-40C TJ=25C TJ=110C TJ=125C 0.001 IC(A) 0.04 0.02 0.01 0.1 0.0001 0.001 IC(A) 0.01 0.1 VBE(sat) @ hFE =10 AM16344v1 1 0.9 0.8 0.7 0.6 TJ=-55C TJ=-40C 0.5 TJ=25C 0.4 0.3 0.0001 TJ=110C TJ=125C 0.001 0.01 0.1 IC(A) Doc ID 15383 Rev 3 5/10 Package mechanical data 3 2N2920AHR Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Table 6. TO-77 mechanical data mm Dim. Min. 6/10 Typ. Max. A 12.70 13.70 B 0.40 0.47 C 0.55 0.76 D 6.11 6.47 E 8.15 8.25 F 9.05 9.25 G 4.85 H 0.71 0.85 I 0.90 1.00 L 42 48 Doc ID 15383 Rev 3 5.08 5.31 2N2920AHR Package mechanical data Figure 5. TO-77 drawing B A C D E F L 2 G 3 5 1 6 7 I H 0015959_F Doc ID 15383 Rev 3 7/10 Package mechanical data Table 7. 2N2920AHR LCC-6 mechanical data mm Dim. Min. Typ. A 1.53 1.96 C 0.78 0.89 0.99 D 1.52 1.65 1.78 E 12.4 1.40 1.55 F 5.77 5.84 5.92 G 4.19 4.31 4.45 I 6.10 6.22 6.35 L 0.56 0.63 0.71 M 3.86 3.94 4.01 N 1.14 1.27 1.40 N1 2.41 2.54 2.67 N2 0.64 0.89 1.14 r 0.23 D1 Figure 6. Max. 2.08 2.28 2.49 LCC-6 drawing I A F E D D1 L G M N C r N1 N2 7098021_C 8/10 Doc ID 15383 Rev 3 2N2920AHR 4 Revision history Revision history Table 8. Document revision history Date Revision Changes 10-Dec-2008 1 Initial release 05-Jan-2010 2 Modified Table 1 on page 1 15-Nov-2012 3 Added: Section 2.1: Electrical characteristics (curves) Updated: Section 3: Package mechanical data Doc ID 15383 Rev 3 9/10 2N2920AHR Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 Doc ID 15383 Rev 3