2N2920AT1 - STMicroelectronics, Inc.

This is information on a product in full production.

November 2012 Doc ID 15383 Rev 3 1/10

2N2920AHR

Hi-Rel NPN dual matched bipolar transistor 60 V, 0.03 A

Datasheet — production data

Features

■Hi-Rel NPN dual matched bipolar transistor

■Linear gain characteristics

■ESCC qualified

■European preferred part list - EPPL

■Radiation level: lot specific total dose contact

marketing for specified level

Description

The 2N2920AHR is a silicon planar epitaxial NPN

transistor in TO-77 and LCC-6 packages. It is

specifically designed for aerospace Hi-Rel

applications and ESCC qualified according to the

5207-002 specification. In case of conflict

between this datasheet and ESCC detailed

specification, the latter prevails.

Figure 1. Internal schematic diagram

BVCEO 60 V

IC (max) 0.03 A

HFE at 10 V - 150 mA > 300

Operating temperature range -65°C to +200°C

LCC-6

TO-77

Table 1. Device summary

Order codes Packages Lead finish Marking Type EPPL Packaging

2N2920AHR TO-77 Gold

Solder Dip

520700203

520700206 ESCC Flight Strip pack

2N2920AT1 TO-77 Gold 2N2920AT1 Engineering

model Strip pack

SOC2920A LCC-6 Gold SOC2920A Engineering

model Waffle pack

SOC2920AHRB LCC-6 Gold

Solder Dip

520700212

520700215 ESCC Flight Yes Waffle pack

www.st.com

Electrical ratings 2N2920AHR

2/10 Doc ID 15383 Rev 3

1 Electrical ratings

Table 2. Absolute maximum ratings

Symbol Parameter Value Unit

VCBO Collector-base voltage (IE = 0) 60 V

VCEO Collector-emitter voltage (IB = 0) 60 V

VEBO Emitter-base voltage (IC = 0) 6 V

ICCollector current 30 mA

PTOT

Total dissipation at Tamb ≤ 25 °C

for SOC2920A (1)

for SOC2920A (2)

for 2N2920AHR (1) (3)

for 2N2920AHR (2) (3)

Total dissipation at Tc ≤ 25 °C

for SOC2920A (1)

for SOC2920A (2)

1. One section.

2. Both sections.

3. When mounted on a 15 x 15 x 0.6 mm ceramic substrate.

0.3

0.5

0.6

0.75

1.25

TSTG Storage temperature -65 to 200 °C

TJMax. operating junction temperature 200 °C

Table 3. Thermal data for through-hole package

Symbol Parameter Value Unit

RthJC

Thermal resistance junction-case (1) __ max

Thermal resistance junction-case (2) __ max

1. One section.

2. Both sections.

233

140

°C/W

RthJA

Thermal resistance junction-ambient (1) __ max

Thermal resistance junction-ambient (2) __ max

583

350

°C/W

Table 4. Thermal data for SMD package

Symbol Parameter Value Unit

RthJA

Thermal resistance junction-ambient (1)(3) __ max

Thermal resistance junction-ambient (2)(3) __ max

1. One section.

2. Both sections.

3. When mounted on a 15 x 15 x 0.6 mm ceramic substrate.

291

175

°C/W

2N2920AHR Electrical characteristics

Doc ID 15383 Rev 3 3/10

2 Electrical characteristics

Tcase = 25 °C unless otherwise specified

Table 5. Electrical characteristics

Symbol Parameter Test conditions Min. Typ. Max. Unit

ICBO

Collector-base cut-off

current (IE = 0)

VCB = 45 V

VCB = 45 V TC = 150 °C

µA

ICEO

Collector cut-off

current (IB = 0) VCE = 5 V 2 nA

IEBO

Emitter-base cut-off

current (IC = 0) VEB = 5 V 2 nA

V(BR)CBO

Collector-base

breakdown voltage

(IE = 0)

IC = 10 µA 60 V

V(BR)CEO (1)

Collector-emitter

breakdown voltage

(IB = 0)

IC = 10 mA 60 V

V(BR)EBO

Emitter-base

breakdown voltage

(IC = 0)

IE = 10 µA 6 V

VCE(sat) (1) Collector-emitter

saturation voltage IC = 1 mA IB = 0.1 mA 0.35 V

VBE(sat) (1) Base-emitter

saturation voltage IC = 1 mA IB = 0.1 mA 0.5 1 V

hFE (1) DC current gain

IC = 10 µA VCE = 5 V

IC = 100 µA VCE = 5 V

IC = 1 mA VCE = 5 V

IC = 10 µA VCE = 5 V

Tamb = -55 °C

150

225

300

600

hFE2-1 / hFE2-2

DC current transfer

ratio comparison

IC = 100 µA VCE = 5 V

Tamb = -55 °C to +25 °C 0.91 1.1

hFE2-1 / hFE2-2

DC current transfer

ratio comparison

IC = 100 µA VCE = 5 V

Tamb = -55 °C to +125 °C 0.85 1.18

Δ⏐ VBE1 -

VBE2⏐Base-emitter voltage

differential

VCE = 5 V IC = 10 µA

VCE = 5 V IC = 100 µA

VCE = 5 V IC = 1 mA

1.5

Δ⏐ VBE1 -

VBE2⏐Base-emitter voltage

differential

VCE = 5 V IC = 100 µA

Tamb = -55 °C to +25 °C

Tamb = +25 °C to +125 °C

0.4

0.5

ILk

Leakage current

between active

devices

V = 50 V to E2, B2, C2

V = 0 V to E1, B1, C1

5µA

Electrical characteristics 2N2920AHR

4/10 Doc ID 15383 Rev 3

fTTransition frequency IC = 0.5 mA VCE = 5 V 60 MHz

hob Output admittance VCE = 5 V IC = 1 mA

f = 1 kHz 1µmho

hib Input impedance VCB = 5 V IC = 1 mA

f = 1 kHz 25 32 W

Cobo

Output capacitance

(IE = 0)

VCB = 5 V

100 kHz ≤ f ≤ 1 MHz 6pF

NF Noise figure

VCE = 5 V IC = 10 µA

RS = 10 kΩ f = 1 kHz

Bandwidth = 200 Hz

3dB

NF Noise figure

VCE = 5 V IC = 10 µA

RS = 10 kΩ

10 Hz ≤ f ≤ 15.7 kHz

Bandwidth = 200 Hz

3dB

1. Pulsed duration = 300 µs, duty cycle ≤ 1.5%

Table 5. Electrical characteristics (continued)

Symbol Parameter Test conditions Min. Typ. Max. Unit

2N2920AHR Electrical characteristics

Doc ID 15383 Rev 3 5/10

2.1 Electrical characteristics (curves)

Figure 2. hFE @ VCE = 5 V Figure 3. VCE(sat) @ hFE =10

Figure 4. VBE(sat) @ hFE =10

(A)

0.0001 0.1

0.001

100

1000

-55°C

-40°C

25°C

110°C

125°C

0.01

AM16342v1

(A)

0.0001 0.001

0.02

-55°C

-40°C

25°C

110°C

125°C

0.01 0.1

0.04

0.06

0.08

0.10

0.12

0.14

0.16

AM16343v1

(A)

0.0001 0.1

0.001

0.4

0.5

-55°C

-40°C

25°C

110°C

125°C

0.6

0.7

0.8

0.9

0.3

0.01

AM16344v1

Package mechanical data 2N2920AHR

6/10 Doc ID 15383 Rev 3

3 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of

ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®

specifications, grade definitions and product status are available at: www.st.com.

ECOPACK® is an ST trademark.

Table 6. TO-77 mechanical data

Dim.

Min. Typ. Max.

A 12.70 13.70

B0.40 0.47

C0.55 0.76

D6.11 6.47

E8.15 8.25

F9.05 9.25

G 4.85 5.08 5.31

H0.71 0.85

I0.90 1.00

L42° 48°

2N2920AHR Package mechanical data

Doc ID 15383 Rev 3 7/10

Figure 5. TO-77 drawing

0015959_F

Package mechanical data 2N2920AHR

8/10 Doc ID 15383 Rev 3

Figure 6. LCC-6 drawing

Table 7. LCC-6 mechanical data

Dim.

Min. Typ. Max.

A1.53 1.96

C 0.78 0.89 0.99

D 1.52 1.65 1.78

E 12.4 1.40 1.55

F 5.77 5.84 5.92

G 4.19 4.31 4.45

I 6.10 6.22 6.35

L 0.56 0.63 0.71

M 3.86 3.94 4.01

N 1.14 1.27 1.40

N1 2.41 2.54 2.67

N2 0.64 0.89 1.14

r0.23

D1 2.08 2.28 2.49

DD1

7098021_C

2N2920AHR Revision history

Doc ID 15383 Rev 3 9/10

4 Revision history

Table 8. Document revision history

Date Revision Changes

10-Dec-2008 1 Initial release

05-Jan-2010 2 Modified Table 1 on page 1

15-Nov-2012 3 Added: Section 2.1: Electrical characteristics (curves)

Updated: Section 3: Package mechanical data

2N2920AHR

10/10 Doc ID 15383 Rev 3

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the

right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any

time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no

liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this

document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products

or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such

third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS

OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT

RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING

APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,

DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE

GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void

any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any

liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America