ALUMINUM ELECTROLYTIC CAPACITORS RS Compact & Low-profile Sized series (Through 100V only) Compact & low profile case size. Compliant to the RoHS directive (2011/65/EU). RZ High Temperature RS Specifications Item Performance Characteristics Category Temperature Range -40 to +85C Rated Voltage Range 6.3 to 400V Rated Capacitance Range 0.1 to 10000F Capacitance Tolerance 20% at 120Hz, 20C Rated voltage (V) Leakage Current 6.3 to 100 After 1 minute's application of rated voltage at 20C, leakage current is not more than 0.03CV or 4 (A), whichever is greater. After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A), whichever is greater. 160 to 400 After 1 minute's application of rated voltage at 20C, I = 0.04CV+100 (A) or less For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency : 120Hz at 20C Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.10 100 0.08 160 0.20 200 0.20 250 0.20 400 0.25 Measurement frequency : 120Hz 6.3 5 12 Rated voltage (V) Z- 25C / Z+20C Impedance ratio ZT / Z20 (MAX.) Z- 40C / Z+20C Stability at Low Temperature 10 4 10 16 3 8 25 2 5 35 2 4 50 2 3 63 2 3 Capacitance change tan Leakage current 100 2 3 160 3 4 200 3 4 250 3 6 400 6 10 Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C. Shelf Life After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 10V 330F) 1 d Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 URS 1 A 3 3 1 MPD Capacitance tolerance (20%) P 0.5 D+0.5 MAX Size code Configuration Rated capacitance (330F) Rated voltage (10V) Pressure relief vent (8up) Series name L+ 15MIN MAX Type 4MIN Configuration (mm) D P d 5 2.0 0.5 6.3 2.5 0.5 8 3.5 0.6 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 20 10.0 1.0 D Pb-free leadwire Pb-free PET sleeve 5 * 6.3 DD 8 * 10 12.5 to 18 20 PD HD RD (D 20) 1.5 (D 20) 2.0 * Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS RS series Dimensions V Cap.(F) 6.3 10 16 25 35 50 0J 1A 1C 1E 1V 1H 9 Code 0.1 0R1 5x 0.22 R22 5x 9 2.3 0.33 R33 5x 9 3.5 0.47 R47 5x 9 5 1 010 5x 9 13 2.2 2R2 5x 9 26 3.3 3R3 5x 9 35 4.7 4R7 10 100 22 220 5x 9 35 5x 9 33 330 5x 9 55 5x 9 1.1 5x 9 30 5x 9 35 5x 9 40 65 5x 9 40 5x 9 50 5x 9 55 5x 9 55 5x 9 70 5x 9 75 5x 9 95 5x 9 90 75 5x 9 85 5x 9 95 5x 9 100 6.3 x 9 120 47 470 5x 9 75 5x 9 90 5x 9 100 5x 9 110 6.3 x 9 130 6.3 x 9 140 100 101 5x 9 125 5x 9 135 6.3 x 9 160 6.3 x 9 180 8x 9 220 10 x 9 240 220 221 6.3 x 9 200 6.3 x 9 220 8x 9 290 10 x 9 310 10 x 9 340 10 x 12.5 420 330 331 6.3 x 9 250 8x 9 300 10 x 9 360 10 x 9 380 10 x 12.5 480 12.5 x 12.5 530 470 471 8x 9 330 8x 9 360 10 x 9 410 10 x 12.5 530 12.5 x 12.5 590 16 x 15 750 1000 102 10 x 9 510 620 12.5 x 12.5 720 12.5 x 15 830 16 x 15 1010 18 x 20 1160 2200 222 12.5 x 15 890 12.5 x 15 960 16 x 15 1160 18 x 15 1360 18 x 20 1560 20 x 25 1750 3300 332 1200 16 x 15 1300 18 x 15 1460 18 x 20 1720 20 x 25 2000 4700 472 1410 18 x 15 1550 18 x 20 1770 18 x 25 2050 6800 682 1660 18 x 20 1850 18 x 25 2170 10000 103 x 15 16 x 15 18 x 15 18 x 20 2020 18 x 25 2350 16 V Cap.(F) Code 10 x 12.5 Case size D x L (mm) 63 100 160 200 250 400 1J 2A 2C 2D 2E 2G 0.1 0R1 5x 9 1.9 0.22 R22 5x 9 4.5 0.33 R33 5x 9 6.5 0.47 R47 5x 9 8 1 010 5x 9 17 2.2 2R2 5x 9 26 3.3 3R3 5x 9 35 4.7 4R7 6.3 x 9 45 10 100 5 x 9.51 60 6.3 x 9 70 22 220 6.3 x 9.51 100 8x 9 130 33 330 8 x 9.51 140 10 x 9 180 47 470 8 x 9.51 170 10 x 12.5 230 68 680 100 101 150 151 220 16 x 15 .16 x 15 16 x 15 * 18 x 15 420 .16 x 15 350 420 * 18 x 15 * 18 x 15 280 350 . 18 x 20 420 18 x 25 420 20 x 25 490 Case size Rated ripple 490 .18 x 20 490 .18 x 25 590 12.5 x 15 370 18 x 20 590 18 x 25 590 18 x 25 710 .18 x 25 710 221 12.5 x 12.5 490 16 x 15 620 .20 x 25 770 330 331 12.5 x 15.5 710 18 x 15 760 470 471 16 x 15.5 900 280 18 x 20 18 x 20 250 140 350 490 10 x 9.51 * 18 x 15 Rated ripple D x L (mm) Rated ripple current (mArms) at 85C 120Hz * Size 16 x 20 is available for capacitors marked " " Size 20 x 15 is available for capacitors marked " " Size 20 x 20 is available for capacitors marked " " Frequency coefficient of rated ripple current V 6.3 to 100 160 to 400 Cap.(F) Frequency 0.1 to 47 100 to 470 1000 to 10000 10 to 220 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1 kHz 1.57 1.34 1.13 1.40 10kHz or more 2.00 1.50 1.15 1.60 In this case, 6 will be put at 12th digit of type numbering system. CAT.8100D