Data Sheet
April 2008
ME005-Series Power Modules:
39.5 Vdc to 60 Vdc Input; 5 W
The ME005-Series Power Modules use advanced, surface-
mount technology and deliver high-quality, compact,
dc-dc conversion at an economical price.
Features
nSmall size: 50.8 mm x 27.9 mm x 11.7 mm
(2.00 in. x 1.10 in. x 0.46 in.)
nOperating ambient temperature range:
–40 °C to +85 °C
nHigh reliability
nInput-to-output isolation
nNo external filtering required
nLoad regulation: 0.15% max (ME005A, B, C, N)
nLine regulation: 0.05% max (ME0 05A, B, C, N)
nOvercurrent protection
nOutput overvoltage protection
nPC board mountable
nUL* 1950 Recognized, CSA C22.2 No. 950-95
Certified, VDE 0805 (E N60950, IEC950) and TUV
Licensed
nWithin FCC Class B require m en ts for radiated
emissions
Options
nLong pins: 5.8 mm (0.230 in.)
Description
The ME005-Series Power Modules are dc-dc converters that operate over an input volt age range of 39.5 Vdc to
60 Vdc and provide precisely regulated dc outputs. The outputs are fully isolated from the input s, allowing ver-
satile polarity configurations and grounding connections. The modules have maximum power ratings of 5 W at
typical full-load efficiencies of 80% to 83% depending on the code.
The modules are encapsulated in nonconductive cases that mount on PC boards. In a natural conve ction envi-
ronment, the modules are rated to full load at 85 °C with no heat sinking or external filtering.
*UL is a registered trademark of Underwriters Laboratories, Inc.
CSA is a registered trademark of Canadian Standards Association.
TÜV is a registered trademark of Technischer Überwachungs-V erein.
Applications
nCommunication equipment
nComputer equipment
nDigital circuitry
nDistributed power architectures
2Lineage Power
Data Sheet
April 2008
39.5 Vdc to 60 Vdc Input; 5 W
ME005-Series Power Modules:
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to th e d evice. The se ar e abso-
lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operations sections of the data sheet. Expos ure to absolute maximum ratings for extended
periods can adversely affect device reliability.
Electrical Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions.
Table 1. Input Specifications
Fusing Considerations
CAUTION: This power module is not internally fused. An input line fuse must always be used.
This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone
operation to an integrated part of a sophisticated power architecture. To preserve maximum flexibility, internal fus-
ing is not included; however, to achieve maximum safety an d system protection, always use an input line fuse. Th e
safety agencies require a normal-blow fuse with a maximum rating of 5 A in series with the input (see Safety Con-
siderations section) . Base d on th e info rmatio n pr ovided in th is data sheet on inrush energy and maximum dc input
current, the same type of fuse with a lower rating can be used. However, for UL recognition, the dc rating of the
fuse must not exceed 5 A. Refer to the fuse manufacturer’s dat a for further information.
Parameter Symbol Min Max Unit
Input Voltage (continuous) VI—60Vdc
Operating Ambient Temperature
(natural convection) TA–40 85 °C
Storage Temperature Tstg –40 100 °C
I/O Isolation Voltage 500 Vdc
Parameter Symbol Min Typ Max Unit
Operating Input Voltage VI39.5 48 60 Vdc
Maximum Input Current
(VI = 0 V to 60 V; IO = IO, max;
see Figures 1—5.)
II, max ——600mA
Inrush Transient i2t—0.31.0A
2s
Input Reflected-ripple Current, Peak-to-peak
(5 Hz to 20 MHz, 12 µH source impedance,
TA = 25 °C; see Figure 31 and Design
Considerations section.)
II—30—mAp-p
Input Ripple Rejection (120 Hz) 53 dB
Lineage Power 3
Data Sheet
April 2008 39.5 Vdc to 60 Vdc Input; 5 W
ME005-Series Power Modules:
Electrical Specifications (continued)
Table 2. Output Specifications
Parameter Device Symbol Min Typ Max Unit
Output Voltage Set Point
(VI = 48 V; IO = IO, max; TA = 25 °C) ME005A
ME005N
ME005B
ME005C
ME005BK
ME005CL
VO, set
VO, set
VO, set
VO, set
VO1, set
VO2, set
VO1, set
VO2, set
4.85
5.10
11.52
14.4
11.4
–11.4
14.25
–14.25
5.0
5.20
12.0
15.0
12.0
–12.0
15.0
–15.0
5.20
5.30
12.48
15.6
12.6
–12.6
15.75
–15.75
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Output Voltage
(Over all operating input voltage,
resistive load, and temperature
conditions until end of life. See
Figure 33. See Fi gu r es 9— 1 2 for
cross regulation on dual outputs.)
ME005A
ME005N
ME005B
ME005C
ME005BK
ME005CL
VO
VO
VO
VO
VO1
VO2
VO1
VO2
4.80
5.05
11.4
14.25
10.08
–10.08
13.5
–13.5
5.25
5.35
12.6
15.75
13.2
–13.2
16.5
–16.5
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Output Regulation:
Line (VI = 39.5 Vdc to 60 Vdc)
Load (IO = IO, min to IO, max)
Temperature
(TA = –40 °C to +85 °C;
see Figures 6—8.)
ME005A, B, C, N
ME005A, B, C, N
ME005A, N
ME005B
ME005C
0.01
0.05
15
40
45
0.05
0.15
70
150
190
%VO
%VO
mV
mV
mV
Output Ripple and Noise Voltage
(With 0.1 µF ceramic bypass
capacitor on output; see Figure 32.):
RMS
Peak-to-peak (5 Hz to 20 MHz)
ME005A, N
ME005B, C
ME005BK, CL
ME005A, N
ME005B, C
ME005BK, CL
15
25
80
50
100
250
mVrms
mVrms
mVrms
mVp-p
mVp-p
mVp-p
Output Current
(At IO < IO, min, the modules may
exceed output ripple specifications
and dual-output modules may
exceed specified output voltages.)
ME005A
ME005N
ME005B
ME005C
ME005BK
ME005CL
IO
IO
IO
IO
IO1
IO2
IO1
IO2
0.02
0.02
0.005
0.005
0.02
0.02
0.017
0.017
1.0
0.96
0.42
0.33
0.21
0.21
0.17
0.17
A
A
A
A
A
A
A
A
Output Current-limit Inception
(See Figures 13—19.):
VO = 4.5 V
VO = 4.68 V
VO = 10.8 V
VO = 13.5 V
VO1 or VO2 = 10.2 V
VO1 or VO2 = 12.75 V
ME005A
ME005N
ME005B
ME005C
ME005BK
ME005CL
IO
IO
IO
IO
IO
IO
1.6
1.6
0.8
0.7
0.8
0.7
2.5
2.5
1.4
1.3
1.4
1.3
A
A
A
A
A
A
44 Lineage Power
Data Sheet
April 2008
39.5 Vdc to 60 Vdc Input; 5 W
ME005-Series Power Modules:
Output Current Limit
(See Figures 13—19.):
VO = 1.0 V
VO = 1.0 V
VO1 or VO2 = 1.0 V
ME005A, N
ME005B, C
ME005BK, CL
3.0
2.0
2.0
A
A
A
Output Short-circu it Cu rr en t
(VO = 250 mV; see Figures 13—19.) ME005A, N
ME005B, C, BK, CL
1.5
1.0
A
A
Efficiency
(VI = 48 V; IO = IO, max; TA = 25 °C;
see Figures 20—24, 33, and 34.)
ME005A, N
ME005B, C
ME005BK, CL
η
η
η
77
80
79
80
83
82
%
%
%
Dynamic Response
(ýIO/ýt = 1 A/10 µs, VI = 48 V,
TA = 25 °C; for ME005BK and CL
applies to VO1 and VO2 at
IO = IO, max):
Load Change from IO = 50% to
75% of IO, max (See Figures
25—27.):
Peak Deviation
Settling Time
(VO < 10% peak deviation)
Load Change from IO = 50% to
25% of IO, max (See Figures
28—30.):
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
ME005A, N
ME005B, C
ME005BK, CL
ME005A, B, C, N
ME005BK, CL
ME005A, N
ME005B
ME005C
ME005BK, CL
ME005A, B, C, N
ME005BK, CL
80
70
50
3.5
5.0
80
70
60
50
3.5
5.0
mV
mV
mV
ms
ms
mV
mV
mV
mV
ms
ms
Parameter Device Symbol Min Typ Max Unit
Electrical Specifications (continued)
Table 2. Output Specifications (continued)
Lineage Power 5
Data Sheet
April 2008 39.5 Vdc to 60 Vdc Input; 5 W
ME005-Series Power Modules:
Electrical Specifications (continued)
Table 3. Isolation Specifications
General Specifications
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions. See Feature Descriptions for further information.
Parameter Device Min Typ Max Unit
Isolation Capacitance All 1200 pF
Isolation Resistance All 10
Parameter Device Min Typ Max Unit
Calculated MTB F (IO = 80% of IO, max; TC = 40 °C) All 7,000,000 hours
Weight All 28 (1.0) g (oz.)
Parameter Device Symbol Min Typ Max Unit
Output Overvoltage Protection (clamp) ME005A, N
ME005B
ME005C
ME005BK
ME005CL
VO, clamp
VO, clamp
VO, clamp
VO1, clamp
VO2, clamp
VO1, clamp
VO2, clamp
6.0
14
17
16
–16
19
–19
7.0
16
19
18
–18
21
–21
V
V
V
V
V
V
V
6Lineage Power
ME005-Series Power Modules: Data Sheet
39.5 Vdc to 60 Vdc Input; 5 W April 2008
Characteristic Curves
8-2181(C)
Figure 1. ME005A, N Typical Input Characteristics
with IO = IO, max and TA = 25 °C (Arrows
Indicate Hystere si s)
8-2182(C)
Figure 2. ME005B Typical Input Characteristics
with IO = IO, max and TA = 25 °C (Arrows
Indicate Hystere si s)
8-2183(C)
Figure 3. ME005C Typical Input Characteristics
with IO = IO, max and TA = 25 °C (Arrows
Indicate Hystere si s)
8-2184(C)
Figure 4. ME005BK Typical Input Characteristics
with IO = IO, max and TA = 25 °C (Arrows
Indicate Hystere si s)
20 30 40
0
200
INPUT V OLTAGE, VI (V)
400
6
0
10
300
50
100
INPUT CURRENT, I I (mA)
10 20 30
0
200
INPUT V OLTAGE, VI (V)
400
6
0
0
300
40 50
100
INPUT CURRENT, II (mA)
10 20 30
0
300
INPUT V OLTAGE, VI (V)
500
6
0
0
400
40 50
100
200
INPUT CURRENT, II (mA)
10 20 30
0
300
INPUT V OLTAGE, VI (V)
500
6
0
0
400
40 50
100
200
INPUT CURRENT, II (mA)
Lineage Power 7
Data Sheet ME005-Series Power Modules:
April 2008 39.5 Vdc to 60 Vdc Input; 5 W
Characteristic Curves (continued)
8-2185(C)
Figure 5. ME005CL Typical Input Characteristics
with IO = IO, max and TA = 25 °C (Arrows
Indicate Hystere si s)
8-615(C).b
Figure 6. ME005A Typical Output Voltage
Variations over Operating Ambient
Temperature Range (ME005N Variations
Are Similar.)
8-614(C).a
Figure 7. ME005B Typical Output Voltage
Variations over Operating Ambient
Temperature Range
8-615(C).a
Figure 8. ME005C Typical Output Voltage
Variations over Operating Ambient
Temperature Range
10 20 30
0
300
INPUT V OLTAGE, VI (V)
500
6
0
0
400
40 50
100
200
INPUT CURRENT, II (mA)
5.15
5.10
5.05
5.00
4.95
4.90
4.85
4.80 -50 -25 0 25 50 75 100 12
5
OPERATING AMBIENT TEMPERATURE, TA (˚C)
OUTPUT V OLTAGE, VO (V)
-75
VO , set = 5.1 V
VO , set = 5.0 V
VO , set = 4.9 V
12.36
12.24
12.12
12.00
11.88
11.76
11.64
11.52 -50 -25 0 25 50 75 100 12
5
OPERATING AMBIENT TEMPERATURE, T
A
(
˚
C)
OUTPUT V OLTAGE, V
O
(V)
-75
V
O, set
= 12.25 V
V
O, set
= 12.0 V
V
O, set
= 11.75 V
15.45
15.30
15.15
15.00
14.85
14.70
14.55
14.40 -50 -25 0 25 50 75 100 12
5
OPERATING AMBIENT TEMPERATURE, TA (
˚
C)
OUTPUT V OLTAGE, VO (V)
-75
VO, set = 15.3 V
VO, set = 15.0 V
VO, set = 14.7 V
8Lineage Power
ME005-Series Power Modules: Data Sheet
39.5 Vdc to 60 Vdc Input; 5 W April 2008
Characteristic Curves (continued)
8-2186(C)
Figure 9. ME005BK Typical VO1 vs. IO1 Regulation
with VI = 48 V and TA = 25 °C
8-2187(C)
Figure 10. ME005BK Typical VO2 vs. IO2 Regulation
with VI = 48 V and TA = 25 °C
8-2188(C)
Figure 11. ME005CL Typical VO1 vs. lO1 Regulation
with VI = 48 V and TA = 25 °C
8-2189(C)
Figure 12. ME005CL Typical VO2 vs. IO2 Regulation
with VI = 48 V and TA = 25 °C
0.02 0.05 0.15
11.0
OUTPUT CURRENT, IO1 (A)
OUTPUT V OLTAGE, VO1 (V)
12.5
0.2
5
0.0
12.0
13.0
0.20
IO2 = 210 mA
IO2 = 50 mA
11.5
0.10 0.21
IO2 = 10 mA
IO2 = 20 mA
0.05 0.10 0.15
-13.0
OUTPUT CURRENT, IO2 (A)
OUTPUT V OLTAGE, VO2 (V)
-11.0
0.2
0.02 0.21
-12.5
-12.0
-11.5
IO1 = 50 mA
0.200.0
IO1 = 210 mA
IO1 = 10 mAIO1 = 20 mA
0.05 0.10 0.15
14.0
OUTPUT CURRENT, IO1 (A)
OUTPUT V OLTAGE, VO1 (V)
16.0
0.2
0
0.01 0.17
14.5
15.0
15.5 IO2 = 170 mA
IO2 = 17 mA
IO2 = 8 mA
0.05 0.10 0.15
-16.0
OUTPUT CURRENT, IO2 (A)
-14.0
0.2
0
0.01 0.17
-15.5
-15.0
-14.5
IO1 = 170 mA
IO1 = 8 mA
IO1 = 17 mA
OUTPUT V OLTAGE, VO2 (V)
Lineage Power 9
Data Sheet ME005-Series Power Modules:
April 2008 39.5 Vdc to 60 Vdc Input; 5 W
Characteristic Curves (continued)
8-2190(C)
Figure 13. ME005A, N Typical Output
Characteristics with VI = 48 V and
TA = 25 °C
8-2191(C)
Figure 14. ME005B Typical Output Characteristics
with VI = 48 V and TA = 25 °C
8-2192(C)
Figure 15. ME005C Typical Output Characteristics
with VI = 48 V and TA = 25 °C
8-2193(C)
Figure 16. ME005BK T ypical Output Characteristics
(VO1 vs. lO1) with VI = 48 V and TA = 25 °C
OUTPUT VOL TAGE, VO
(V)
0.5 1.0 1.5
0
4
OUTPUT CURRENT, IO (A)
OUTPUT V OLTAGE, VO (V)
6
2
.5
0.0
5
2.0
1
2
3
5.2 ME005N
ME005A
OUTPUT VOL TAGE, VO
0.2 0.4 0.6
0
12
OUTPUT CURRENT, IO (A)
OUTPUT V OLTAGE, VO (V)
16
1
.4
0.0
14
0.8
2
1.0 1.2
4
6
8
10
OUTPUT VOL TAGE, V
O
0.2 0.4 0.6
0
10
OUTPUT CURRENT, I
O
(A)
OUTPUT V OLTAGE, V
O
(V)
20
1
.4
0.0
15
0.8 1.0 1.2
5
0.2 0.4 0.6
0
2
OUTPUT CURRENT, IO1 (A)
OUTPUT V OLTAGE, VO1 (V)
12
1
.0
0.0
10
14
0.8
IO2 = 210 mA IO2 = 20 mA
4
6
8
10 Lineage Power
ME005-Series Power Modules: Data Sheet
39.5 Vdc to 60 Vdc Input; 5 W April 2008
Characteristic Curves (continued)
8-2194(C)
Figure 17. ME005BK T ypical Output Characteristics
(VO2 vs. IO2) with VI = 48 V and TA = 25 °C
8-2195(C)
Figure 18. ME005CL T ypical Output Characteristics
(VO1 vs. lO1) with VI = 48 V and TA = 25 °C
8-2196(C)
Figure 19. ME005CL T ypical Output Characteristics
(VO2 vs. IO2) with VI = 48 V and TA = 25 °C
8-2197(C)
Figure 20. ME005A, N Typical Converter Efficiency
as a Function of Output Current with
VI = 48 V and TA = 25 °C
0.20 .4 0.6
-14
-6
OUTPUT CURRENT, I
O2
(A)
OUTPUT VOLTAGE, V
O2
(V)
-2
1
.0
0.0
-12
-4
0
0.8
-8
-10IO1 = 210 mA
IO1 = 20 mA
0.20 .4 0.6
0
5
OUTPUT CURRENT, I
O1
(A)
OUTPUT VOLTAGE, V
O1
(V)
15
1
.0
0.0
10
20
0.8
I
O2
= 170 mA I
O2
= 17 mA
0.20 .4 0.6
-20
-15
OUTPUT CURRENT, IO2 (A)
OUTPUT VOLTAGE, VO2 (V)
-5
1
.0
0.0
-10
0
0.8
IO1 = 170 mA
IO1 = 17 mA
0.30 .4 0.5
72
76
OUTPUT CURRENT, IO (A)
EFFICIENCY, η (%)
84
1
.0
0.2
82
0.60.70.8
74
0.9
78
80
Lineage Power 11
Data Sheet
April 2008 39.5 Vdc to 60 Vdc Input; 5 W
ME005-Series Power Modules:
Characteristic Curves (continued)
8-2198(C)
Figure 21. ME005B Typical Converter Efficiency
as a Function of Output Current with
VI = 48 V and TA = 25 °C
8-2199(C)
Figure 22. ME005C Typical Converter Efficiency
as a Function of Output Current with
VI = 48 V and TA = 25 °C
8-2200(C)
Figure 23. ME005BK Typical Converter Efficiency
as a Function of Output Current with
VI = 48 V and TA = 25 °C
8-2201(C)
Figure 24. ME005CL Typical Converter Efficiency
as a Function of Output Current with
VI = 48 V and TA = 25 °C
0.15 0.20 0.25
72
76
OUTPUT CURRENT, IO (A)
EFFICIENCY, η (%)
84
0.4
5
0.10
82
0.30 0.35 0.40
74
78
80
0.14 0.18 0.22
72
76
OUTPUT CURRENT, I O (A)
EFFICIENCY, η (%)
84
0.3
4
0.10
82
0.26 0.30
74
78
80
86
0.10 0.15 0.20
70
74
OUTPUT CURRENT, IO1 = IO2 (A)
EFFICIENCY, η (%)
82
0.2
5
0.05
80
72
76
78
84
0.06 0.08 0.10
70
74
OUTPUT CURRENT, I
O1 =
I
O2
(A)
EFFICIENCY, η (%)
82
0.2
0
0.04
80
72
76
78
84
0.12 0.14 0.16 0.18
1212 Lineage Power
Data Sheet
April 2008
39.5 Vdc to 60 Vdc Input; 5 W
ME005-Series Power Modules:
Characteristic Curves (continued)
8-2202(C)
Figure 25. ME005A Typical Output Voltage
Waveform for a Step Load Change from
50% to 75% of IO, max with VI = 48 V and
TA = 25 °C (ME005N W aveform Is Similar,
but with 5.2 V Steady-State.)
8-2203(C)
Figure 26. ME005B Typical Output Voltage
Waveform for a Step Load Change from
50% to 75% of IO, max with VI = 48 V and
TA = 25 °C
8-2204(C)
Figure 27. ME005C Typical Output Voltage
Waveform for a Step Load Change from
50% to 75% of IO, max with VI = 48 V and
TA = 25 °C
8-2205(C)
Figure 28. ME005A Typical Output Voltage
Waveform for a Step Load Change from
50% to 25% of IO, max with VI = 48 V and
TA = 25 °C (ME005N Waveform Is Similar ,
but with 5.2 V Steady-State.)
TIME, t (1 ms/div)
OUTPUT VOLTAGE, V
O
(V)
(50 mV/div)
OUTPUT CURRENT, I
O
(A)
(0.5 A/div)
0A
0.5A
0.75A
5.0V
4.95V
4.9V
Δlo
Δt1 A
10 µs
=
TIME, t (500 µs/div)
OUTPUT VOLTAGE, V
O
(V)
(50 mV/div)
Δlo
Δt1 A
10 µs
=
0A
0.1A
12.00V
11.95V
11.90V
0.3A
0.2A
OUTPUT CURRENT, IO (A)
(0.1 A/div)
TIME, t (500 µs/div)
OUTPUT VOLTAGE, VO (
V)
(50 mV/div)
0A
0.1A
15.00V
14.95V
14.90V
0.2A
OUTPUT CURRENT, IO (A)
(0.1 A/div)
0.25A Δlo
Δt1 A
10 µs
=
TIME, t (1 ms/div)
OUTPUT VOLTAGE, VO (V
)
(50 mV/div)
0A
5.10V
5.05V
5.00V
0.25A
OUTPUT CURRENT, IO (A)
(0.5 A/div)
0.5A
Δlo
Δt1 A
10 µs
=
Lineage Power 13
Data Sheet
April 2008 39.5 Vdc to 60 Vdc Input; 5 W
ME005-Series Power Modules:
Characteristic Curves (continued)
8-2206(C)
Figure 29. ME005B Typical Output Voltage
Waveform for a Step Load Change from
50% to 25% of IO, max with VI = 48 V and
TA = 25 °C
8-2207(C)
Figure 30. ME005C Typical Output Voltage
Waveform for a Step Load Change from
50% to 25% of IO, max with VI = 48 V and
TA = 25 °C
Test Configurations
8-203(C).n
Note: Input reflected-ripple current is measured with a simulated
source impedance of 12 µH. Capacitor CS offsets possible
battery impedance. Current is measured at the input of the
module.
Figure 31. Input Reflec ted-Ripple Test Setup
8-513(C)
Note:Use a 0.1 µF ceramic capacitor. Scope measurement should
be made using a BNC socket. Position the load between
50 mm and 75 mm (2 in. and 3 in.) from the module.
Figure 32. Peak-to-Peak Output Noise
Measurement Test Setup
8-204(C)
Note:All measurements are taken at the module terminals. When
socketing, place Kelvin connections at module terminals to
avoid measurement errors due to socket contact resistance.
Figure 33. ME005A, B, C, N Output Voltage and
Efficiency Measurement Test Setup
TIME, t (500 µs/div)
OUTPUT VOLTAGE, VO (V
)
(50 mV/div)
Δlo
Δt1 A
10 µs
=
0A
0.1A
12.10V
12.05V
12.00V
0.2A
OUTPUT CURRENT, IO (A)
(0.1 A/div)
TIME, t (500 µs/div)
OUTPUT VOLTAGE, VO (V
)
(50 mV/div)
Δlo
Δt1 A
10 µs
=
0A
0.1A
15.10V
15.05V
15.00V
0.2A
0.08A
OUTPUT CURRENT, IO (A)
(0.1 A/div)
TO OSCILLOSCOPE
12 µH
CS 220 µF
IMPEDANCE< 0.1 Ω
@ 20 ˚C, 100 kHz
VI(+)
VI(-)
BATTERY
CURRENT
PROBE
LTEST
VO(+)
VO(–)
1.0 µF RESISTIVE
LOAD
SCOPE
COPPER STRIP
VI(+)
VI(-)
VO(+)
VO(-)
IIIO
SUPPLY
CONTACT RESISTANCE
CONTACT AND
DISTRIBUTION LOSSES
LOAD
ηVO(+) VO(–)[] IO
VI(+) VI(–)[] II
-----------------------------------------------------100×=%
1414 Lineage Power
Data Sheet
April 2008
39.5 Vdc to 60 Vdc Input; 5 W
ME005-Series Power Modules:
Test Configurations (continued)
8-506(C)
Note:All measurements are taken at the module terminals. When
socketing, place Kelvin connections at module terminals to
avoid measurement errors due to socket contact resistance.
Figure 34. ME005BK, CL Output Voltage and
Efficiency Measurement Test Setup
Design Considerations
Input Reflected Ripple
An internal aluminum electrolytic input capacitor is
used for filtering; therefore, input ripple increases as
temperature decreases. There is approximately two
times more ripple at 0 °C than at 25 °C and eight times
more ripple at –40 °C tha n at 25 °C. The power modu le
functions properly down to –40 °C with no additional fil-
tering. If ripple comparable to that at 25 °C is needed at
low temperatures, an external capacitor across the
input with an impedance of 0.5 Ω at 100 kHz over the
desired temperature range is recommended.
Output Voltage Reversal
CAUTION: Applying a reverse voltage across the
module output forward biases an inter-
nal diode. Attempting to start the mod-
ule under this condition can damage
the module.
Safety Considerations
For safety-agency approval of the system in which the
power module is used, the power module must be
insta lled in compliance with the spacing and sep aration
requirements of the end-use safety agency standard,
i.e., UL 1950, CSA C22.2 No. 950-95, and VDE 0805
(EN60950, IEC950).
If the input source is non-SELV (ELV or a hazardous
voltage greater than 60 Vdc and less than or equal to
75 Vdc), for the module's output to be considered
meeting the re qu ire m en ts of safety ex tra -lo w vo ltage
(SELV), all of the following must be true:
nThe input source is to be provided with reinforced
insulation from any other haza rd ous voltages, includ-
ing the ac mains.
nOne VI pin and one VO pin are to be grounded or
both the input and output pins are to be kept floating.
nThe input pins of the module are not operator acces-
sible.
nAnother SELV reliability test is conducted on the
whole system, as required by the safety agencies, on
the combination of supply source and the subject
module to verify that under a single fault, hazardous
voltages do not appear at the module's output.
Note: Do not ground either of the input pins of the
module without grounding one of the output
pins. This may allow a non-SELV voltage to
appear between the output pins and ground.
The power module has e xtra-low voltag e (ELV) outputs
when all inputs are ELV.
The input to these units is to be provided with a maxi-
mum 5 A normal-blow fuse in the ungrounded lead.
Feature Descriptions
Overcurrent Protection
To provide protection in a fault (output overload) condi-
tion, the unit is equipped with internal current-limiting
circuitry and can endure current limiting for an unlim-
ited duration. At the point of current-limit inception, the
unit shifts from voltage control to current contr ol. If the
output voltage is pulled very low during a severe fault,
the current- limit circuit can exh ibit eith er fo ldback or t ai-
lout characte rist ics (o ut pu t cur re n t dec re as e or
increase). The unit operates normally once the output
current is brought back into its specified range.
Output Overvoltage Protection
The output overvoltage clamp consists of control cir-
cuitry, which is independent of the primary regulation
loop, that monitors the voltage on the output terminals.
The control loop of the clamp has a higher voltage set
point than the primary lo op (see Feature Specifications
table). This provides a redundant voltage-control that
reduces the risk of outpu t overvoltage.
S
UPPLY
V
I
(+)
V
I
(-)
V
O1
V
O2
I
I
CONTACT
RESISTANCE CONTACT AND
DISTRIBUTION LOSSES
LOA
D
COM
LOA
D
η
VOj(+) VCOM[] IOj
j1=
2
VI(+) VI(–)[] II
------------------------------------------------------------------------- 100×=%
Lineage Power 15
Data Sheet
April 2008 39.5 Vdc to 60 Vdc Input; 5 W
ME005-Series Power Modules:
Outline Diagrams
Dimensions are in millimeters and (inches).
Module tolerances, unless otherwise indicated: x.x ± 0.5 mm (0.02 in.), x.xx ± 0.25 mm (0.010 in.).
Single-Output Module
Top View
Side View
Bottom View
8-356(C)
50.8 (2.00) MAX
27.9 (1.1
0)
MAX
-
+MADE IN USA
IN
-
ME005A
DC-DC Power Module
OUT
+
IN:DC 48V, 0.13A OUT:DC 5V, 1A
U.S. Patent 4903182
11.7 (0.4
6)
MAX
2.8 (0.11
)
0.51 (0.020)
0.79 (0.031) DIA
ROUND PIN (TYP)
5.08
(0.200)
15.2
(0.60) 20.32
(0.800)
7.62
(0.300)
12.70
(
0.500)
11.4
(0.45)
16 Lineage Power
Data Sheet
April 2008
39.5 Vdc to 60 Vdc Input; 5 W
ME005-Series Power Modules:
Outline Diagrams (continued)
Dimensions are in millimeters and (inches).
Module tolerances, unless otherwise indicated: x. x ± 0.5 mm (0.02 in.), x.xx ± 0.25 mm (0.010 in.).
Dual-Output Module
Top View
Side View
Bottom View
8-356(C)
50.8 (2.00) MAX
27.9 (1.1
0)
MAX
-
+
MADE IN USA
IN
- 12V
ME005BK
DC-DC Power Module
IN:DC 48V, 0.13A
COM
+ 12V
OUT:DC 12V, 0.21A
OUT2:DC -12V, 0.21A
U.S. Patent 4903182
11.7 (0.4
6)
MAX
2.8 (0.11
)
0.51 (0.020)
0.79 (0.031) DIA
ROUND PIN (TYP)
5.08
(0.200)
15.2
(0.60) 20.32
(0.800)
7.62
(0.300)
2.54
(0.100)
12.70
(0.500)
11.4
(0.45)
Lineage Power 17
Data Sheet
April 2008 39.5 Vdc to 60 Vdc Input; 5 W
ME005-Series Power Modules:
Recommended Hole Patterns
Component-side footprint.
Dimensions are in millimeters and (inches).
Single-Output Module
8-356(C)
Dual-Outp ut Module
8-356(C)
MODULE OUTLINE
5.08
(0.200)
7.62
(0.300) 15.2
(0.60) 20.32
(0.800)
12.70
(
0.500)
11.4
(0.45)
MODULE OUTLINE
5.08
(0.200)
7.62
(0.300)
2.54
(0.100)
15. 2
(0.60) 20.32
(0.800)
12.70
(
0.500)
11.4
(0.45)
18 Lineage Power
Data Sheet
April 2008
39.5 Vdc to 60 Vdc Input; 5 W
ME005-Series Power Modules:
Ordering Information
For assistance in ordering, please contact your Lineage Power Account Manager or Application Eng ineer.
Table 4. Device Codes
Table 5. Device Options
Input
Voltage Output
Voltage Output Power Device
Code Comcode
39.5 V—60 V 5 V 5 W ME005A 105524185
39.5 V—60 V 5.2 V 5 W ME005N 106197619
39.5 V—60 V 12 V 5 W ME005B 105550487
39.5 V—60 V 15 V 5 W ME005C 10555 0495
39.5 V—60 V +12 V, –12 V 5 W ME005BK 105569891
39.5 V—60 V +15 V, –15 V 5 W ME005CL 105728786
Option Device Suffix
Long pins: 5.8 mm (0.230 in.) –SLP
Lineage Power 19
Data Sheet
April 2008 39.5 Vdc to 60 Vdc Input; 5 W
ME005-Series Power Modules:
Notes
Data Sheet
April 2008
39.5 Vdc to 60 Vdc Input; 5 W
ME005-Series Power Modules:
April 2008
DS98-306EPS (Replaces DS98-305EPS)
World Wide He a dquart e rs
Lin e age P o w er Corp ora tio n
3000 Sky li ne Dri ve, Mesquite, TX 75149, USA
+1-800-526-7819
(Outsid e U.S.A.: +1-972-284-2626)
www.li neagepower.com
e -m ail: techsupport1@line agepower.com
A sia-Pacific Headqu art er s
T el: +65 6416 4283
Europe, Middle-East and Africa Hea dquarte rs
T el: +49 89 6089 286
Ind ia Headqu arters
T el: +91 80 28411633
Lineage Power reserves the right to m ake changes to the produc t(s) or i nformation contai ned herein without notice. No l iability is assum ed as a resul t of their use or
application. No rights under any patent acc om pany the sale of any such product(s ) or information.
© 2008 Lineage Power Corporation, (Mesquite, Texas ) All International Rights Res erved.