APT8024B2FLL APT8024LFLL 800V 31A 0.240W POWER MOS 7TM FREDFET Power MOS 7TM is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching losses are addressed with Power MOS 7TM by significantly lowering RDS(ON) and Qg. Power MOS 7TM combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. * Lower Input Capacitance * Increased Power Dissipation * Lower Miller Capacitance * Easier To Drive * Lower Gate Charge, Qg * Popular T-MAXTM or TO-264 Package * FAST RECOVERY BODY DIODE MAXIMUM RATINGS Symbol VDSS ID B2FLL T-MAXTM TO-264 LFLL D G S All Ratings: TC = 25C unless otherwise specified. Parameter APT8024 UNIT 800 Volts Drain-Source Voltage L A C I N H C N E T IO E T C MA N A OR V AD INF 31 Continuous Drain Current @ TC = 25C 1 Amps IDM Pulsed Drain Current VGS Gate-Source Voltage Continuous 30 Gate-Source Voltage Transient 40 Total Power Dissipation @ TC = 25C 565 Watts Linear Derating Factor 4.52 W/C VGSM PD TJ,TSTG 124 -55 to 150 Operating and Storage Junction Temperature Range TL Lead Temperature: 0.063" from Case for 10 Sec. IAR Avalanche Current EAR Repetitive Avalanche Energy EAS Single Pulse Avalanche Energy 1 Volts C 300 31 (Repetitive and Non-Repetitive) 1 Amps 50 4 mJ 2500 STATIC ELECTRICAL CHARACTERISTICS BVDSS ID(on) RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions MIN Drain-Source Breakdown Voltage (VGS = 0V, ID = 250A) 800 Volts 31 Amps On State Drain Current 2 (VDS > ID(on) x R DS(on) Max, VGS = 10V) Drain-Source On-State Resistance 2 (VGS = 10V, 0.5 ID[Cont.]) TYP MAX 0.240 Zero Gate Voltage Drain Current (VDS = VDSS, VGS = 0V) 250 UNIT Ohms A Zero Gate Voltage Drain Current (VDS = 0.8 VDSS, VGS = 0V, TC = 125C) 1000 Gate-Source Leakage Current (VGS = 30V, VDS = 0V) 100 nA 5 Volts Gate Threshold Voltage (VDS = VGS, ID = 2.5mA) 3 CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com USA 405 S.W. Columbia Street Bend, Oregon 97702-1035 Phone: (541) 382-8028 FAX: (541) 388-0364 EUROPE Chemin de Magret F-33700 Merignac - France Phone: (33) 5 57 92 15 15 FAX: (33) 5 56 47 97 61 050-7074 Rev - 8-2001 Symbol APT8024 B2FLL - LFLL DYNAMIC CHARACTERISTICS Symbol Characteristic Test Conditions MIN TYP Ciss Input Capacitance VGS = 0V 4420 Coss Output Capacitance VDS = 25V 850 Crss Reverse Transfer Capacitance f = 1 MHz 140 VGS = 10V 163 VDD = 0.5 VDSS ID = ID [Cont.] @ 25C 21 92 VGS = 15V 17 VDD = 0.5 VDSS 16 ID = ID [Cont.] @ 25C 51 RG = 0.6W 10 Qg Total Gate Charge 3 Gate-Source Charge Qgd Gate-Drain ("Miller ") Charge tr t d(off) tf Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time UNIT pF L A C I N H C N E T O I E T C MA N A OR V AD INF Qgs t d(on) MAX nC ns SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS Symbol IS Characteristic / Test Conditions TYP Continuous Source Current (Body Diode) ISM Pulsed Source Current 1 VSD Diode Forward Voltage 2 dv/ Peak Diode Recovery dv/dt dt MIN (Body Diode) (VGS = 0V, IS = -ID [Cont.]) 5 MAX 31 124 UNIT Amps 1.3 Volts 18 V/ns t rr Reverse Recovery Time (IS = -ID [Cont.], di/dt = 100A/s) Tj = 25C 300 Tj = 125C 600 Q rr Reverse Recovery Charge (IS = -ID [Cont.], di/dt = 100A/s) Tj = 25C 2.0 Tj = 125C 6.7 IRRM Peak Recovery Current (IS = -ID [Cont.], di/dt = 100A/s) Tj = 25C 13 Tj = 125C 22 ns C Amps THERMAL CHARACTERISTICS Symbol Characteristic MIN TYP MAX Junction to Case RqJA Junction to Ambient 40 1 Repetitive Rating: Pulse width limited by maximum junction 3 See MIL-STD-750 Method 3471 4 Starting T = +25C, L = 5.20mH, R = 25W, Peak I = 31A j G L 5 The maximum current is limited by lead temperature temperature. 2 Pulse Test: Pulse width < 380 S, Duty Cycle < 2% APT Reserves the right to change, without notice, the specifications and information contained herein. T-MAXTM (B2) Package Outline 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) TO-264 (L) Package Outline 4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 15.49 (.610) 16.26 (.640) 19.51 (.768) 20.50 (.807) 3.10 (.122) 3.48 (.137) 5.38 (.212) 6.20 (.244) 5.79 (.228) 6.20 (.244) Drain Drain 20.80 (.819) 21.46 (.845) 4.50 (.177) Max. 050-7074 Rev - 8-2001 0.40 (.016) 0.79 (.031) 25.48 (1.003) 26.49 (1.043) 2.87 (.113) 3.12 (.123) 19.81 (.780) 20.32 (.800) 19.81 (.780) 21.39 (.842) Gate Drain Source Gate Drain Source 0.48 (.019) 0.84 (.033) 2.59 (.102) 3.00 (.118) 5.45 (.215) BSC 2-Plcs. 0.76 (.030) 1.30 (.051) 2.79 (.110) 3.18 (.125) 5.45 (.215) BSC 2-Plcs. These dimensions are equal to the TO-247 without the mounting hole. Dimensions in Millimeters and (Inches) APT's devices are covered by one or more of the following U.S.patents: 4,895,810 5,256,583 2.29 (.090) 2.69 (.106) 2.29 (.090) 2.69 (.106) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 2.21 (.087) 2.59 (.102) UNIT 0.22 RqJC Dimensions in Millimeters and (Inches) 5,045,903 4,748,103 5,089,434 5,283,202 5,182,234 5,231,474 5,019,522 5,434,095 5,262,336 5,528,058 C/W