MKP/MKP 378 Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP/MKP Radial Potted Type FEATURES 168x12(halfpage) l 15 to 27.5 mm pitch. Supplied loose in box and taped on reel w Lead (Pb)-free product h e3 RoHS-compliant product RoHS COMPLIANT RATED (DC) VOLTAGE lt 630 V; 1000 V; 1600 V; 2000 V Odt P0.4 RATED (AC) VOLTAGE Dimensions in mm 300 V; 400 V; 500 V; 600 V APPLICATIONS Where steep pulses occur e.g. SMPS (switch mode power supplies). Motor control circuits. It is not advised to use these products as resonance capacitors in fly-back applications. RATED PEAK-TO-PEAK VOLTAGE 850 V; 1130 V; 1400 V; 1700 V CLIMATIC CATEGORY MARKING C-value; tolerance; rated voltage; manufacturer's type designation; code for dielectric material; manufacturer's emblem; code for factory of origin; year and week of manufacture 55/085/56 RATED (DC) TEMPERATURE 85 C DIELECTRIC RATED (AC) TEMPERATURE Polypropylene film 70 C ELECTRODES MAXIMUM APPLICATION TEMPERATURE Metallized film 85 C ENCAPSULATION REFERENCE SPECIFICATIONS Flame retardant plastic case and epoxy resin (UL-class 94 V-0) IEC 60384-17 PERFORMANCE GRADE CONSTRUCTION Grade 1 (long life) Internal serial construction STABILITY GRADE LEADS Pitch 15 mm: grade 2 Pitch 22.5 and 27.5 mm: grade 1 Tinned wire CAPACITANCE RANGE (E24 SERIES) 0.002 to 0.68 F CAPACITANCE TOLERANCE DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-17/102" 5% Document Number: 28134 Revision: 21-Nov-05 For technical questions contact: filmcaps.roeselare@vishay.com www.vishay.com 1 MKP/MKP 378 Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP/MKP Radial Potted Type COMPOSITION OF CATAOG NUMBER MULTIPLIER (nF) TYPE AND PITCHES 15.0 mm 378 22.5 mm 27.5 mm 0.1 2 1 3 10 4 CAPACITANCE (numerically) Example: 104 = 10 x 10 = 100 nF 2222 378 BFC2* 378 XX XX X XX XX X * Use this partnumber for those with access to the Vishay's SAP system and Partners website within the Americas PREFERRED TYPES TYPE 378 PACKAGING loose in box LEAD CONFIGURATION lead length 3.5 0.3 mm C-TOL 630 V 5% 64 1000 V 1600 V 2000 V 2500 V 74 84 94 04 ON REQUEST 378 loose in box lead length 5.0 1 .0 mm taped on reel H = 18.5 mm; P0 = 12.7 mm 5% 62 72 82 92 02 65 75 85 95 05 SPECIFIC REFERENCE DATA (630 VDC) DESCRIPTION Tangent of loss angle: C 0.18 F 0.2 F C 0.3 F 0.33 F C 0.39 F 0.43 F C 0.51 F C > 0.51 F Rated voltage pulse slope (dU/dt)R : P = 15 mm P = 22.5 mm P = 27.5 mm P = 27.5 mm R between leads, for C 1 F; 500 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC)voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case www.vishay.com 2 VALUE at 10 kHz 8 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 10 x 10-4 at 100 kHz 15 x 10-4 25 x 10-4 30 x 10-4 40 x 10-4 45 x 10-4 500 V/s 370 V/s 230 V/s (b < 15 mm) 120 V/s (b 15 mm) > 100000 M > 100000 M > 400 V 1008 V; 1 minute 2840 V; 1 minute For technical questions contact: filmcaps.roeselare@vishay.com Document Number: 28134 Revision: 21-Nov-05 MKP/MKP 378 AC and Pulse Metallized Polypropylene Film Capacitors Vishay BCcomponents MKP/MKP Radial Potted Type URdc = 630 V; URac = 300 V; Up-p = 850 V CATAOG NUMBER 2222 378 ..... AND PACKAGING LOOSE IN BOX C (F) DIMENSIONS WxHxL (mm) MASS (g) lt = 3.5 0.3 mm REEL ALL LEADS C-tol = 5 % LAST 5 DIGITS OF CATAOG NUMBER SPQ SPQ Pitch = 15.0 0.4 mm; dt = 0.60 0.06 mm 0.015 0.016 0.018 0.02 0.022 0.024 0.027 0.03 0.033 5.0 x 11.0 x 17.5 1.2 6.0 x 12.0 x 17.5 1.4 64153 64163 64183 64203 64223 64243 64273 64303 64333 1000 1100 1000 900 1000 800 1000 650 200 550 200 450 200 350 Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.036 0.039 0.043 0.047 0.051 7.0 x 13.5 x 17.5 1.9 8.5 x 15.0 x 17.5 2.6 64363 64393 64433 64473 64513 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.068 0.075 0.082 0.091 0.1 0.11 0.12 0.13 0.15 0.16 0.18 7.0 x 16.5 x 26.0 3.2 8.5 x 18.0 x 26.0 4.4 10.0 x 19.5 x 26.0 5.5 64683 64753 64823 64913 64104 64114 64124 64134 64154 64164 64184 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.2 0.22 0.24 0.27 0.3 0.33 0.36 0.39 0.43 0.47 0.51 0.56 0.62 0.68 Document Number: 28134 Revision: 21-Nov-05 11.0 x 21.0 x 31.0 7.8 13.0 x 23.0 x 31.0 10.4 15.0 x 25.0 x 31.0 12.8 18.0 x 28.0 x 31.0 17.2 64204 64224 64244 64274 64304 64334 64364 64394 64434 64474 64514 64564 64624 64684 For technical questions contact: filmcaps.roeselare@vishay.com 100 100 100 100 www.vishay.com 3 MKP/MKP 378 Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP/MKP Radial Potted Type SPECIFIC REFERENCE DATA (1000 VDC) DESCRIPTION VALUE Tangent of loss angle: C 0.051 F 0.056 F C 0.22 F Rated voltage pulse slope (dU/dt)R : P = 15 mm P = 22.5 mm P = 27.5 mm P = 27.5 mm R between leads, for C 1 F; 500 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC)voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz 6 x 10-4 8 x 10-4 at 100 kHz 15 x 10-4 20 x 10-4 1300 V/s 1200 V/s 600 V/s (b < 15 mm) 300 V/s (b 15 mm) > 100000 M > 100000 M > 500 V 1600 V; 1 minute 2840 V; 1 minute URdc = 1000 V; URac = 400 V; Up-p = 1130 V CATAOG NUMBER 2222 378 ..... AND PACKAGING LOOSE IN BOX C (F) DIMENSIONS WxHxL (mm) MASS (g) lt = 3.5 0.3 mm REEL ALL LEADS C-tol = 5 % LAST 5 DIGITS OF CATAOG NUMBER SPQ SPQ Pitch = 15.0 0.4 mm; dt = 0.60 0.06 mm 0.003 74302 0.0033 74332 0.0036 74362 0.0039 74392 0.0043 74432 0.0047 5.0 x 11.0 x 17.5 1.2 0.0051 74472 0.0056 74562 0.0062 74622 0.0068 74682 0.0075 74752 0.0082 74822 0.0091 74912 0.01 1000 1100 1100 900 200 550 200 450 200 350 74512 6.0 x 12.0 x 17.5 1.4 0.011 74103 74113 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.02 0.022 74203 7.0 x 16.5 x 26.0 3.2 0.024 74223 74243 0.027 74273 0.03 74303 0.033 8.5 x 18.0 x 26.0 4.4 0.036 74333 74363 0.039 74393 0.043 74433 0.047 0.051 www.vishay.com 4 10.0 x 19.5 x 26.0 5.5 74473 74513 For technical questions contact: filmcaps.roeselare@vishay.com Document Number: 28134 Revision: 21-Nov-05 MKP/MKP 378 AC and Pulse Metallized Polypropylene Film Capacitors Vishay BCcomponents MKP/MKP Radial Potted Type CATAOG NUMBER 2222 378 ..... AND PACKAGING LOOSE IN BOX C (F) DIMENSIONS WxHxL (mm) MASS (g) lt = 3.5 0.3 mm REEL ALL LEADS C-tol = 5 % LAST 5 DIGITS OF CATAOG NUMBER SPQ SPQ Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.056 74563 0.062 74623 0.068 11.0 x 21.0 x 31.0 7.8 74753 0.082 74823 0.091 0.1 74913 13.0 x 23.0 x 31.0 10.4 0.11 74104 74124 15.0 x 25.0 x 31.0 12.8 74134 0.15 74154 0.16 74164 0.18 0.2 100 74114 0.12 0.13 100 74683 0.075 18.0 x 28.0 x 31.0 17.5 100 74184 100 74204 74224 0.22 SPECIFIC REFERENCE DATA (1600 VDC) DESCRIPTION Tangent of loss angle: VALUE at 10 kHz at 100 kHz C 0.022 F 5 x 10-4 10 x 10-4 0.024 F C 0.1 F 6 x 10-4 15 x 10-4 Rated voltage pulse slope (dU/dt)R at 1600 V (DC): P = 22.5 mm 1600 V/s P = 27.5 mm 900 V/s (b < 15 mm) P = 27.5 mm 450 V/s (b 15 mm) R between leads, for C 1 F; 500 V; 1 minute > 100000 M R between leads and case; 500 V; 1 minute > 100000 M Ionization (AC)voltage (typical value) at 20 pC peak discharge > 600 V Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 minute Withstanding (DC) voltage between leads and case 2840 V; 1 minute Document Number: 28134 Revision: 21-Nov-05 For technical questions contact: filmcaps.roeselare@vishay.com www.vishay.com 5 MKP/MKP 378 Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP/MKP Radial Potted Type URdc = 1600 V; URac = 500 V; Up-p = 1400 V CATAOG NUMBER 2222 378 ..... AND PACKAGING LOOSE IN BOX C (F) DIMENSIONS WxHxL (mm) MASS (g) lt = 3.5 0.3 mm REEL ALL LEADS C-tol = 5 % LAST 5 DIGITS OF CATAOG NUMBER SPQ SPQ 300 600 200 550 200 450 200 350 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.0056 0.0062 84562 6.0 x 15.5 x 26.0 2.6 84622 0.0068 84682 0.0075 84752 0.0082 0.0091 7.0 x 16.5 x 26.0 3.2 84822 84912 0.01 84103 0.011 84113 0.012 0.013 84123 8.5 x 18.0 x 26.0 4.4 84133 0.015 84153 0.016 84163 0.018 0.02 84183 10.0 x 19.5 x 26.0 5.5 0.022 84203 84223 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.024 84243 0.027 0.03 84273 11.0 x 21.0 x 31.0 7.8 84303 0.033 84333 0.036 84363 0.039 84393 0.043 84433 0.047 13.0 x 23.0 x 31.0 10.4 0.051 84563 15.0 x 25.0 x 31.0 12.8 84623 0.068 84683 0.075 84753 0.082 0.091 0.1 www.vishay.com 6 100 84513 0.056 0.062 84473 100 18.0 x 28.0 x 31.0 17.2 84823 84913 100 100 84104 For technical questions contact: filmcaps.roeselare@vishay.com Document Number: 28134 Revision: 21-Nov-05 MKP/MKP 378 AC and Pulse Metallized Polypropylene Film Capacitors Vishay BCcomponents MKP/MKP Radial Potted Type SPECIFIC REFERENCE DATA (2000 VDC) DESCRIPTION VALUE Tangent of loss angle: C 0.051 F Rated voltage pulse slope (dU/dt)R at 2000 V (DC): P = 22.5 mm P = 27.5 mm P = 27.5 mm R between leads, for C 1 F; 500 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC)voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz 5 x 10-4 at 100 kHz 10 x 10-4 2000 V/s 1200 V/s (b < 15 mm) 600 V/s (b 15 mm) > 100000 M > 100000 M > 600 V 3200 V; 1 minute 2840 V; 1 minute URdc = 2000 V; URac = 600 V; Up-p = 1700 V CATAOG NUMBER 2222 378 ..... AND PACKAGING LOOSE IN BOX C (F) DIMENSIONS WxHxL (mm) MASS (g) lt = 3.5 0.3 mm REEL ALL LEADS C-tol = 5 % LAST 5 DIGITS OF CATAOG NUMBER SPQ SPQ 300 600 200 550 200 450 200 350 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 0.0075 0.0082 0.0091 0.01 0.011 0.012 6.0 x 15.5 x 26.0 2.6 7.0 x 16.5 x 26.0 3.2 8.5 x 18.0 x 26.0 4.4 10.0 x 19.5 x 26.0 5.5 94332 94362 94392 94432 94472 94512 94562 94622 94682 94752 94822 94912 94103 94113 94123 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.013 0.015 0.016 0.018 0.02 0.022 0.024 0.027 0.030 0.033 0.036 0.039 0.043 0.047 0.051 Document Number: 28134 Revision: 21-Nov-05 11.0 x 21.0 x 31.0 7.8 13.0 x 23.0 x 31.0 10.4 15.0 x 25.0 x 31.0 12.8 18.0 x 28.0 x 31.0 17.5 94133 94153 94163 94183 94203 94223 94243 94273 94303 94333 94363 94393 94433 94473 94513 For technical questions contact: filmcaps.roeselare@vishay.com 100 100 100 100 www.vishay.com 7 MKP/MKP 378 Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP/MKP Radial Potted Type MAXIMUM RMS VOLTAGE (SINEWAVE) AS A 3 10 10 Tamb 70 C, 630 VDC 1 10 10 4 10 5 10 6 f (Hz) 10 7 3 2 10 3 10 4 10 5 10 6 f (Hz) 10 7 CAPACITANCE f (Hz) 10 7 2 max. 10 6 f (Hz) 10 7 1 10 3 10 4 10 5 10 IMPEDANCE 10 1 kHz 2 Impedance () C/C (%) 2 6 Tamb 70 C, 2000 VDC 1 10 10 3 Tamb 70 C, 1600 VDC 10 5 10 nF 4.7 0 nFF 1 2n F 2 7n 4 nF 10 nF 22 7 nF F 4 0n 10 10 Tamb 70 C,1000 VDC 10 1 3 4 10 10 10 AC voltage (V) 10 3 AC voltage (V) 10 2 nF F 4 .7 0 n F 1 n 47 nF 0 F 10 0 n 22 2 nF 22 7 nF F 4 0n F 10 70 n 4 10 3 AC voltage (V) AC voltage (V) 10 FUNCTION OF FREQUENCY typical min. 0 10 0 3.3 nF 10 nF -1 10 100 nF 10 -2 -2 -40 www.vishay.com 8 0 40 Tamb (C) 80 -3 10 4 10 3.3 F 10 5 For technical questions contact: filmcaps.roeselare@vishay.com 1.0 F 10 6 10 7 f (Hz) 8 10 Document Number: 28134 Revision: 21-Nov-05 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000