Document Number: 28134 For technical questions contact: filmcaps.roeselare@vishay.com www.vishay.com
Revision: 21-Nov-05 1
MKP/MKP 378
Vishay BCcomponents
AC and Pulse Metallized Polypropylene Film Capacitors
MKP/MKP Radial Potted Type
APPLICATIONS
Where steep pulses occur e.g. SMPS (switch mode power
supplies). Motor control circuits. It is not advised to use these
products as resonance capacitors in fly-back applications.
MARKING
C-value; tolerance; rated voltage; manufacturer’s type
designation; code for dielectric material; manufacturer’s
emblem; code for factory of origin; year and week of
manufacture
DIELECTRIC
Polypropylene film
ELECTRODES
Metallized film
ENCAPSULATION
Flame retardant plastic case and epoxy resin
(UL-class 94 V-0)
CONSTRUCTION
Internal serial construction
LEADS
Tinned wire
CAPACITANCE RANGE (E24 SERIES)
0.002 to 0.68 µF
CAPACITANCE TOLERANCE
± 5 %
FEATURES
15 to 27.5 mm pitch. Supplied loose in box
and taped on reel
Lead (Pb)-free product
RoHS-compliant product
RATED (DC) VOLTAGE
630 V; 1000 V; 1600 V; 2000 V
RATED (AC) VOLTAGE
300 V; 400 V; 500 V; 600 V
RATED PEAK-TO-PEAK VOLTAGE
850 V; 1130 V; 1400 V; 1700 V
CLIMATIC CATEGORY
55/085/56
RATED (DC) TEMPERATURE
85 °C
RATED (AC) TEMPERATURE
70 °C
MAXIMUM APPLICATION TEMPERATURE
85 °C
REFERENCE SPECIFICATIONS
IEC 60384-17
PERFORMANCE GRADE
Grade 1 (long life)
STABILITY GRADE
Pitch 15 mm: grade 2
Pitch 22.5 and 27.5 mm: grade 1
DETAIL SPECIFICATION
For more detailed data and test requirements
see “Type detail specification HQN-384-17/102”
168x12(halfpage)
l w
P±0.4 Ødt
h
lt
Dimensions in mm
e3
RoHS
COMPLIANT
www.vishay.com For technical questions contact: filmcaps.roeselare@vishay.com Document Number: 28134
2Revision: 21-Nov-05
MKP/MKP 378
Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors
MKP/MKP Radial Potted Type
COMPOSITION OF CATAOG NUMBER
SPECIFIC REFERENCE DATA (630 VDC)
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.18 µF ≤ 8 ×10−4≤ 15 ×10−4
0.2 µF ≤C≤0.3 µF ≤ 10 ×10−4≤ 25 ×10−4
0.33 µF ≤C≤0.39 µF ≤ 10 ×10−4≤ 30 ×10−4
0.43 µF ≤C≤0.51 µF ≤ 10 ×10−4≤ 40 ×10−4
C>0.51 µF ≤ 10 ×10−4≤ 45 ×10−4
Rated voltage pulse slope (dU/dt)R :
P=15 mm 500 V/µs
P=22.5 mm 370 V/µs
P=27.5 mm 230 V/µs (b <15 mm)
P=27.5 mm 120 V/µs (b ≥15 mm)
R between leads, for C ≤1µF; 500V; 1minute > 100000 MΩ
R between leads and case; 500 V; 1 minute > 100000 MΩ
Ionization (AC)voltage (typical value) at 50 pC peak discharge > 400 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
2222 378 XX XX X
BFC2* 378 XX XX X
TYPE AND PITCHES
378
15.0 mm
22.5 mm
27.5 mm
TYPE PACKAGING LEAD CONFIGURATION
PREFERRED TYPES
C-TOL 630 V 1000 V 1600 V 2000 V 2500 V
378 loose in box lead length 3.5 ± 0.3 mm ± 5 % 64 74 84 94 04
ON REQUEST
378 loose in box lead length 5.0 ±1 .0 mm ± 5 % 62 72 82 92 02
taped on reel H =18.5 mm; P0=12.7mm 6575859505
MULTIPLIER
(nF)
0.1 2
13
10 4
CAPACITANCE
(numerically)
Example:
104 =10 x 10 =100 nF
* Use this partnumber for those with access to the
Vishay’s SAP system and Partners website within
the Americas
Document Number: 28134 For technical questions contact: filmcaps.roeselare@vishay.com www.vishay.com
Revision: 21-Nov-05 3
MKP/MKP 378
AC and Pulse Metallized Polypropylene Film Capacitors
MKP/MKP Radial Potted Type Vishay BCcomponents
URdc =630 V; URac =300 V; Up-p =850 V
C
(µF)
DIMENSIONS
W×H×L
(mm)
MASS
(g)
CATAOG NUMBER 2222 378 ..... AND PACKAGING
LOOSE IN BOX REEL
lt=3.5 ± 0.3 mm ALL LEADS
C-tol =± 5 %
LAST 5 DIGITS OF
CATAOG NUMBER SPQ SPQ
Pitch =15.0 ± 0.4 mm; dt=0.60 ± 0.06 mm
0.015
5.0 ×11.0 ×17.5 1.2
64153
1000 1100
0.016 64163
0.018 64183
0.02 64203
0.022 64223
0.024
6.0 ×12.0 ×17.5 1.4
64243
1000 900
0.027 64273
0.03 64303
0.033 64333
Pitch =15.0 ± 0.4 mm; dt=0.80 ± 0.08 mm
0.036
7.0 ×13.5 ×17.5 1.9
64363
1000 800
0.039 64393
0.043 64433
0.047 8.5 ×15.0 ×17.5 2.6 64473 1000 650
0.051 64513
Pitch =22.5 ± 0.4 mm; dt=0.80 ± 0.08 mm
0.068
7.0 ×16.5 ×26.0 3.2
64683
200 550
0.075 64753
0.082 64823
0.091 64913
0.1
8.5 ×18.0 ×26.0 4.4
64104
200 450
0.11 64114
0.12 64124
0.13 64134
0.15
10.0 ×19.5 ×26.0 5.5
64154
200 350
0.16 64164
0.18 64184
Pitch =27.5 ± 0.4 mm; dt=0.80 ± 0.08 mm
0.2
11.0 ×21.0 ×31.0 7.8
64204
100
0.22 64224
0.24 64244
0.27 64274
0.3
13.0 ×23.0 ×31.0 10.4
64304
100
0.33 64334
0.36 64364
0.39 64394
0.43
15.0 ×25.0 ×31.0 12.8
64434
100
0.47 64474
0.51 64514
0.56
18.0 ×28.0 ×31.0 17.2
64564
100
0.62 64624
0.68 64684
www.vishay.com For technical questions contact: filmcaps.roeselare@vishay.com Document Number: 28134
4Revision: 21-Nov-05
MKP/MKP 378
Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors
MKP/MKP Radial Potted Type
SPECIFIC REFERENCE DATA (1000 VDC)
URdc =1000 V; URac =400 V; Up-p =1130 V
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.051 µF ≤ 6×10−4≤ 15 ×10−4
0.056 µF≤C≤0.22 µF ≤ 8×10−4≤ 20 ×10−4
Rated voltage pulse slope (dU/dt)R :
P=15 mm 1300 V/µs
P=22.5 mm 1200 V/µs
P=27.5 mm 600 V/µs (b <15 mm)
P=27.5 mm 300 V/µs (b ≥15 mm)
R between leads, for C ≤1µF; 500V; 1minute > 100000 MΩ
R between leads and case; 500 V; 1 minute > 100000 MΩ
Ionization (AC)voltage (typical value) at 50 pC peak discharge > 500 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1600 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
C
(µF)
DIMENSIONS
W×H×L
(mm)
MASS
(g)
CATAOG NUMBER 2222 378 ..... AND PACKAGING
LOOSE IN BOX REEL
lt=3.5 ± 0.3 mm ALL LEADS
C-tol =± 5 %
LAST 5 DIGITS OF
CATAOG NUMBER SPQ SPQ
Pitch =15.0 ± 0.4 mm; dt=0.60 ± 0.06 mm
0.003
5.0 ×11.0 ×17.5 1.2
74302
1000 1100
0.0033 74332
0.0036 74362
0.0039 74392
0.0043 74432
0.0047 74472
0.0051 74512
0.0056 74562
0.0062 74622
0.0068 74682
0.0075 74752
0.0082
6.0 ×12.0 ×17.5 1.4
74822
1100 900
0.0091 74912
0.01 74103
0.011 74113
Pitch =22.5 ± 0.4 mm; dt=0.80 ± 0.08 mm
0.02
7.0 ×16.5 ×26.0 3.2
74203
200 5500.022 74223
0.024 74243
0.027
8.5 ×18.0 ×26.0 4.4
74273
200 450
0.03 74303
0.033 74333
0.036 74363
0.039
10.0 ×19.5 ×26.0 5.5
74393
200 350
0.043 74433
0.047 74473
0.051 74513
Document Number: 28134 For technical questions contact: filmcaps.roeselare@vishay.com www.vishay.com
Revision: 21-Nov-05 5
MKP/MKP 378
AC and Pulse Metallized Polypropylene Film Capacitors
MKP/MKP Radial Potted Type Vishay BCcomponents
SPECIFIC REFERENCE DATA (1600 VDC)
Pitch =27.5 ± 0.4 mm; dt=0.80 ± 0.08 mm
0.056
11.0 ×21.0 ×31.0 7.8
74563
100
0.062 74623
0.068 74683
0.075 74753
0.082 74823
0.091
13.0 ×23.0 ×31.0 10.4
74913
1000.1 74104
0.11 74114
0.12
15.0 ×25.0 ×31.0 12.8
74124
1000.13 74134
0.15 74154
0.16
18.0 ×28.0 ×31.0 17.5
74164
100
0.18 74184
0.2 74204
0.22 74224
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.022 µF ≤ 5 ×10−4≤ 10 ×10−4
0.024 µF ≤C≤0.1 µF ≤ 6×10−4≤ 15 ×10−4
Rated voltage pulse slope (dU/dt)R at 1600 V (DC):
P=22.5 mm 1600 V/µs
P=27.5 mm 900 V/µs (b <15 mm)
P=27.5 mm 450 V/µs (b ≥15 mm)
R between leads, for C ≤1 µF; 500 V; 1 minute > 100000 MΩ
R between leads and case; 500 V; 1 minute > 100000 MΩ
Ionization (AC)voltage (typical value) at 20 pC peak discharge > 600 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
C
(µF)
DIMENSIONS
W×H×L
(mm)
MASS
(g)
CATAOG NUMBER 2222 378 ..... AND PACKAGING
LOOSE IN BOX REEL
lt=3.5 ± 0.3 mm ALL LEADS
C-tol =± 5 %
LAST 5 DIGITS OF
CATAOG NUMBER SPQ SPQ
www.vishay.com For technical questions contact: filmcaps.roeselare@vishay.com Document Number: 28134
6Revision: 21-Nov-05
MKP/MKP 378
Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors
MKP/MKP Radial Potted Type
URdc =1600 V; URac =500 V; Up-p =1400 V
C
(µF)
DIMENSIONS
W×H×L
(mm)
MASS
(g)
CATAOG NUMBER 2222 378 ..... AND PACKAGING
LOOSE IN BOX REEL
lt=3.5 ± 0.3 mm ALL LEADS
C-tol =± 5 %
LAST 5 DIGITS OF
CATAOG NUMBER SPQ SPQ
Pitch =22.5 ± 0.4 mm; dt=0.80 ± 0.08 mm
0.0056
6.0 ×15.5 ×26.0 2.6
84562
300 6000.0062 84622
0.0068 84682
0.0075
7.0 ×16.5 ×26.0 3.2
84752
200 550
0.0082 84822
0.0091 84912
0.01 84103
0.011
8.5 ×18.0 ×26.0 4.4
84113
200 450
0.012 84123
0.013 84133
0.015 84153
0.016 84163
0.018
10.0 ×19.5 ×26.0 5.5
84183
200 3500.02 84203
0.022 84223
Pitch =27.5 ± 0.4 mm; dt=0.80 ± 0.08 mm
0.024
11.0 ×21.0 ×31.0 7.8
84243
100
0.027 84273
0.03 84303
0.033 84333
0.036 84363
0.039
13.0 ×23.0 ×31.0 10.4
84393
100
0.043 84433
0.047 84473
0.051 84513
0.056
15.0 ×25.0 ×31.0 12.8
84563
1000.062 84623
0.068 84683
0.075
18.0 ×28.0 ×31.0 17.2
84753
100
0.082 84823
0.091 84913
0.1 84104
Document Number: 28134 For technical questions contact: filmcaps.roeselare@vishay.com www.vishay.com
Revision: 21-Nov-05 7
MKP/MKP 378
AC and Pulse Metallized Polypropylene Film Capacitors
MKP/MKP Radial Potted Type Vishay BCcomponents
SPECIFIC REFERENCE DATA (2000 VDC)
URdc =2000 V; URac =600 V; Up-p =1700 V
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
C≤0.051 µF ≤ 5×10−4≤ 10 ×10−4
Rated voltage pulse slope (dU/dt)R at 2000 V (DC):
P=22.5 mm 2000 V/µs
P=27.5 mm 1200 V/µs (b <15 mm)
P=27.5 mm 600 V/µs (b ≥15 mm)
R between leads, for C ≤1 µF; 500 V; 1 minute > 100000 MΩ
R between leads and case; 500 V; 1 minute > 100000 MΩ
Ionization (AC)voltage (typical value) at 20 pC peak discharge > 600 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3200 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
C
(µF)
DIMENSIONS
W×H×L
(mm)
MASS
(g)
CATAOG NUMBER 2222 378 ..... AND PACKAGING
LOOSE IN BOX REEL
lt=3.5 ± 0.3 mm ALL LEADS
C-tol =± 5 %
LAST 5 DIGITS OF
CATAOG NUMBER SPQ SPQ
Pitch =22.5 ± 0.4 mm; dt=0.80 ± 0.08 mm
0.0033 6.0 ×15.5 ×26.0 2.6 94332 300 600
0.0036 94362
0.0039
7.0 ×16.5 ×26.0 3.2
94392
200 550
0.0043 94432
0.0047 94472
0.0051 94512
0.0056
8.5 ×18.0 ×26.0 4.4
94562
200 450
0.0062 94622
0.0068 94682
0.0075 94752
0.0082 94822
0.0091
10.0 ×19.5 ×26.0 5.5
94912
200 350
0.01 94103
0.011 94113
0.012 94123
Pitch =27.5 ± 0.4 mm; dt=0.80 ± 0.08 mm
0.013
11.0 ×21.0 ×31.0 7.8
94133
100
0.015 94153
0.016 94163
0.018 94183
0.02 94203
0.022
13.0 ×23.0 ×31.0 10.4
94223
1000.024 94243
0.027 94273
0.030
15.0 ×25.0 ×31.0 12.8
94303
1000.033 94333
0.036 94363
0.039
18.0 ×28.0 ×31.0 17.5
94393
100
0.043 94433
0.047 94473
0.051 94513
www.vishay.com For technical questions contact: filmcaps.roeselare@vishay.com Document Number: 28134
8Revision: 21-Nov-05
MKP/MKP 378
Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors
MKP/MKP Radial Potted Type
MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY
470 nF
100 nF
Tamb ≤ 70 °C, 630 VDC
AC voltage
(V)
10 3
10 2
10 1
f (Hz)
10 310 410 5
22 nF
10 6107
47 nF
220 nF
4.7 nF
100 nF
Tamb ≤ 70 °C,1000 VDC
AC voltage
(V)
10 3
10 2
10 1
f (Hz)
10 310 410 5
10 nF
10 610 7
47 nF
100 nF
Tamb ≤ 70 °C, 1600 VDC
AC voltage
(V)
10 3
10 2
10 1
f (Hz)
10 310 410 5
10 nF
22 nF
10610 7
47 nF
4.7 nF
Tamb ≤ 70 °C, 2000 VDC
AC voltage
(V)
10 3
10 2
10 1
f (Hz)
10 310 410 5
10 nF
22 nF
10 6107
47 nF
CAPACITANCE IMPEDANCE
-40
∆C/C
(%)
2
-2
0
04080Tamb (°C)
1 kHz
min.
max.
typical
3.3 µF
1.0 µF
100 nF
10 nF
Impedance
(Ω)
10 2
10 0
f (Hz)
10 6
10 410 510 710 8
10-1
10-3
10-2
3.3 nF
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
