DS21209 Rev. 10 - 6
1 of 3
www.diodes.com
GBPC25005/W - GBPC2510/W
© Diodes Incorporated
OBSOLETE
PLEASE USE GBJ25005 – GBJ2510 (DS21221)
GBPC25005/W - GBPC2510/W
25A GLASS PASSIVATED BRIDGE RECTIFIER
Features
Glass Passivated Die Construction
Low Reverse Leakage Current
Low Power Loss, High Efficiency
Surge Overload Rating to 300A Peak
Metal Base for Maximum Heat Dissipation
Case to Terminal Isolation Voltage 1500V
UL Listed Under Recognized Component Index,
File Number E94661
Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
Case: GBPC / GBPC-W
Case Material: Molded Plastic with Heatsink Internally
Mounted in the Bridge Encapsulation. UL Flammability
Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020C
Terminals: Finish Silver. Plated Leads Solderable per
MIL-STD-202, Method 208
Polarity: As Marked on Case
Mounting: Through Hole for #10 Screw
Mounting Torque: 8.0 Inch-pounds Maximum
Ordering Information: See Page 3
Marking: Type Number
GBPC Weight: 20 grams (approximate)
GBPC-W Weight: 14 grams (approximate)
GBPC / GBPC-W
Dim Min Max
A 28.30 28.80
B 7.40 8.25
C 16.10 17.10
E 18.80 21.30
G 13.80 14.80
H Hole for #10 screw
5.08 5.59
J 17.60 18.60
K 10.90 11.90
L 0.97 1.07
M 31.80
P 17.60 18.60
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol GBPC25
005/W
GBPC25
01/W
GBPC25
02/W
GBPC25
04/W
GBPC25
06/W
GBPC25
08/W
GBPC25
10/W Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current @ TC = 60C IO 25 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on
Rated Load
IFSM 300 A
Forward Voltage (per element) @ IF = 12.5A VFM 1.1 V
Peak Reverse Current @ TC = 25C
at Rated DC Blocking Voltage @ TC = 125C IR 5.0
500 A
I2t Rating for Fusing (Note 1) I2t 374 A2s
Typical Total Capacitance (Note 2) CT 300 pF
Typical Thermal Resistance per Leg (Note 3) RJC 1.3 °C/W
Operating and Storage Temperature Range Tj, TSTG -65 to +150 C
Notes: 1. Non-repetitive, for t > 1.0ms and t < 8.3ms.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Thermal resistance junction to case mounted on heatsink.
4. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.
C
A
G
E
B
H
(AC)
(AC)
(+)
( - )
H
J
A
C
K
A
M
B
H
H
L
P
A
P
(AC)
(AC)
( - )
( + )
GBPC
GBPC-W
“W” Suffix Designates Wire Leads
No Suffix Designates Faston Terminals
DS21209 Rev. 10 - 6
2 of 3
www.diodes.com
GBPC25005/W - GBPC2510/W
© Diodes Incorporated
OBSOLETE
PLEASE USE GBJ25005 – GBJ2510 (DS21221)
0
10
20
0 25 50 75 100 125 150
I, AVE
R
A
G
E
F
O
R
WA
R
D
C
U
R
R
EN
T
(A)
F
T , CASE TEMPERATURE ( C)
Fig. 1 Forward Current Derating Curve
C
°
Resistive or
Inductive load
Mounted on a
220 x 220 x 50 mm
AL plate heatsink
30
40
0.01
0.1
1.0
10
100
0 0.4 0.8 1.0 1.6 1.80.60.2 1.2 1.4
I, INS
T
AN
T
ANE
O
U
S
F
O
R
WA
R
D
C
U
R
R
EN
T
(A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics (per element)
F
T = 25°C
j
0
100
200
300
110100
I,
P
EAK
F
O
R
WA
R
D S
U
R
G
E
C
U
R
R
EN
T
(A)
FSM
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Max Non-Repetitive Surge Current
Single half-sine wave
T = 150°C
j
400
10
100
1000
0.1 1.0 10 100
C
,
T
O
T
AL
C
A
P
A
C
I
T
A
N
C
E (p
F
)
T
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Total Capacitance (per element)
R
f = 1 Mhz
T = 25°C
j
0.01
0.1
1.0
10
100
4020 60 80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 5 Typical Reverse Characteristics (per element)
DS21209 Rev. 10 - 6
3 of 3
www.diodes.com
GBPC25005/W - GBPC2510/W
© Diodes Incorporated
OBSOLETE
PLEASE USE GBJ25005 – GBJ2510 (DS21221)
Ordering Information (Note 5)
Device Packaging Shipping
GBPC25005 GBPC 100/Tray
GBPC2501 GBPC 100/Tray
GBPC2502 GBPC 100/Tray
GBPC2504 GBPC 100/Tray
GBPC2506 GBPC 100/Tray
GBPC2508 GBPC 100/Tray
GBPC2510 GBPC 100/Tray
GBPC25005W GBPC-W 100/Tray
GBPC2501W GBPC-W 100/Tray
GBPC2502W GBPC-W 100/Tray
GBPC2504W GBPC-W 100/Tray
GBPC2506W GBPC-W 100/Tray
GBPC2508W GBPC-W 100/Tray
GBPC2510W GBPC-W 100/Tray
Note: 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02008.pdf.
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2013, Diodes Incorporated
www.diodes.com