Crimp Snap D D*MA How to Order - Crimp Connectors (contacts are removable) Receptacles (Includes Socket Contacts) With .120" Through-Mounting Holes Number of Contacts (Shell Size) Standard Military Version M24308 Cross Reference 9 (E) DEMA9S DEMAM9S M24308/2-1 15 (A) DAMA15S DAMAM15S M24308/2-2 25 (B) DBMA25S DBMAM25S M24308/2-3 37 (C) DCMA37S DCMAM37S M24308/2-4 50 (D) DDMA50S DDMAM50S M24308/2-5 Plugs (Includes Pin Contacts)* With .120" Through-Mounting Holes Number of Contacts (Shell Size) Standard Military Version M24308 Cross Reference 9 (E) DEMA9P DEMAM9P M24308/4-1 15 (A) DAMA15P DAMAM15P M24308/4-2 25 (B) DBMA25P DBMAM25P M24308/4-3 37 (C) DCMA37P DCMAM37P M24308/4-4 50 (D) DDMA50P DDMAM50P M24308/4-5 To receive these connectors without contacts. add "F0" to end of part number. Example: DBMA25SF0, DBMAM25SF0. NM Non-Magnetic/No Outgas-Add desired suffix code with desired option to end of part number. Example: DEMA9PSNMB DEMA9PSNMB-K52 Crimp Connectors without contacts, add F0 to end of the part number and change K52 to K47. Mounting Options Avalable: 4-40 Clinch Nut - Add "E" to Part Number After "M" or "A" 4-40 Fload Mount - Add "Y" to Part Number After "M" or "A" (Can be used in front or rear panel mount applications) Assembly Instructions - Page 363. Performance Specifications - Page 332. Example: DBMAE25S DBMAM255 DEMAY9P DBMAMY9P Dimensions - Crimp Connectors M L B* J D* + + 10 TYP. G K D' B' H E X MAX. C A Rear Front Part Number by Shell Size A +_ .015 (0.38) B* + _ .005 (0.13) B' +_ .005 (0.13) C D* +_ .005 (0.13) +_ .005 (0.13) D' + _ .005 (0.13) E +_ .015 (0.38) G +_ .010 (0.25) H +_ .010 (0.25) J +_ .010 (0.25) K +_ .006 (0.15) L +_ .013 (0.33) M +_ .010 (0.25) X Max. DEMA-9P 1.213 (30.81) - .666 (16.91) .984 (24.99) - .329 (8.36) .494 (12.55) .759 (19.28) .422 (10.72) .030 (0.76) .235 (5.97) .048 (1.22) .422 (10.72) .345 (8.76) DEMA-9S 1.213 (30.81) .643 (16.33) - .984 (24.99) .311 (7.90) - .494 (12.55) .759 (19.28) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) .345 (8.76) DAMA-15P 1.541 (39.14) - .994 (25.24) 1.312 (33.32) - .329 (8.36) .494 (12.55) 1.083 (27.51) .422 (10.72) .030 (0.76) .235 (5.97) .048 (1.22) .422 (10.72) .345 (8.76) DAMA-15S 1.541 (39.14) .971 (24.66) - 1.312 (33.32) .311 (7.90) - .494 (12.55) 1.083 (27.51) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) .345 (8.76) DBMA-25P 2.088 (53.03) - 1.534 (38.96) 1.852 (47.04) - .329 (8.36) .494 (12.55) 1.625 (41.27) .422 (10.72) .039 (0.99) .230 (5.84) .060 (1.52) .426 (10.82) .345 (8.76) DBMA-25S 2.088 (53.03) 1.511 (38.38) - 1.852 (47.04) .311 (7.90) - .494 (12.55) 1.625 (41.27) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) .345 (8.76) DCMA-37P 2.729 (69.31) - 2.182 (55.42) 2.500 (63.50) - .329 (8.36) .494 (12.55) 2.272 (57.71) .422 (10.72) .039 (0.99) .230 (5.84) .060 (1.52) .426 (10.82) .345 (8.76) DCMA-37S 2.729 (69.31) 2.159 (54.84) - 2.500 (63.50) .311 (7.90) - .494 (12.55) 2.272 (57.71) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) .345 (8.76) DDMA-50P 2.635 (66.92) - 2.079 (52.81) 2.406 (61.11) - .441 (11.20) .605 (15.37) 2.178 (55.32) .534 (13.56) .039 (0.99) .230 (5.84) .060 (1.52) .426 (10.82) .345 (8.76) DDMA-50S 2.635 (66.92) 2.064 (52.43) - 2.406 (61.11) .423 (10.74) - .605 (15.37) 2.178 (55.32) .534 (13.56) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) .345 (8.76) Mountign Option Dimensions - Crimp Components .070 (1.78) MAX. .031 (0.79) +_ .005 (0.13) .103 (2.62) +_ .023 (0.58) .120 +_ .005 (3.05 +_ 0.13) .130 (3.30) MAX. .049 (1.24) MAX. .089 (2.26) +_ .003 (0.08) DIA. .049 (1.24) MAX. Standard-Through-Hole CLINCH NUT NO. 4 (.112) 40 UNC E-Clinch Nut RIVET .031 (0.79) TOTAL DIAMETRICAL FLOAT WASHER OVERALL FREE FLOAT .004-.012 (0.10)-(0.30) Y Float Mount It is recommended that only one assembly, either pin or socket, be float mounted. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 334 Crimp Snap D D*MA High Rel Crimp Contacts NM MATERIALS AND FINISHES Contact Size Wire Size Accom. Standard Finish Pin Socket Military Finish Pin Socket NMB Pin Socket 20 20, 22, 24 330-5291-000 031-1007-000 330-5291-037 031-1007-042 330-5291-037 031-1007-057 20-18 1 #18 & 2 #22 330-5291-001 031-1007-001 330-5291-055 031-1007-054 - - 20-26 26, 28, 30 330-5291-004 031-1007-004 330-5291-050 031-1007-048 - - 22D 22, 24, 26, 28 030-2042-002* 031-1147-002* - - MIL-C-39029 Cross-Reference Assembly Instructions - Page 363 Contact Size Wire Size Accom. M39029 M24308 Cannon Part No. 20 Pin 20/22/24 /64-369 /11-1 330-5291-037 20 Socket 20/22/24 /36-368 /10-1 031-1007-042 22D Pin 24/26/28 /58-360 /13-1 030-2042-000 22D Socket 22/24/26/28 /57-354 /12-1 031-1147-000 *50 microinch AU over copper, no stripes. Tooling Insertion/Extraction Tools CIET-20HD Plastic Insertion/Extraction Plastic Extraction Contact Size AWG 20 20, 22, 24 980-2000-426 CIET-20HD 323-7010-000 2026 26, 28, 30 980-2000-426 CIET 20HD 323-7010-000 CET-20-11 1 #18 None None 274-5016-002 CET-20-15 2018 Description Part No. Part No. Description CET-20-11 2 #22 None None 274-5016-002 CET-20-15 22D 22, 24, 26, 28 274-7048-000 CIET 22D None None High Power 12, 16 274-7003-000 CIET 12 None None High Volt #20 274-7003-000 CIET 12 None None Hand Crimp Tools M22520/1-01 Contact Size 20 Semi-Automatic Crimp Machines M22520/2-01 Crimp Tool AWG 20, 22, 24 Part No. Locator Description Part No. Description M22520/2-08 995-0001-584 M22520/2-01 995-0001-604 995-0001-585 M22520/2-01 995-0001-244 TH25 995-0001-584 M22520/2-01 995-0001-325 L3198-20HD 2026 26, 28, 30 2018 1 #18 2 #22 995-0001-584 M22520/2-01 980-0005-722 K250 22D 22, 24, 26, 28 995-0001-584 M22520/2-01 995-0001-739 M22520/2-06 The CBT-646, Vibra-Bowl Crimper is pneumatically powered, electronically controlled machine. It is designed to semi-automatically crimp closed barrel, machined contacts, as used in the aerospace and commerical industries. The machine will accommodate wire sizes 30 thru 12 AWG. The CBT-646 is actuated automatically upon insertion of a pre-stripped stranded or single conductor wire. The CBT-646 meets all Mil. Spec. requirements for crimping closed barrel contacts. Machine Crimp Rate: 1300 + per hour Power Requirements: Electrical = 115 Vac., 60 Hz, 5A Pneumatic = 85 psi., 2 cu. ft. per min. Products: Most ITT Cannon Commerical and Aerospace closed barrel contacts, wire sizes 30 thru 12 AWG. (See connector line for part numbers.) CBT-646 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 335