X637
301 WEST O STREET • OGALLALA, NE 69153
Phone: (308) 284-3611 e-mail: sales@ascapacitor.com
Fax: (308) 284-8324 web: www.ascapacitor.com
PAGE 3 OF 3
GENERAL SPECIFICATIONS
PHYSICAL CHARACTERISTICS
CONSTRUCTION: NON-INDUCTIVE WOUND METALLIZED POLYESTER.
CASE: FLAME RETARDANT TAPE WRAP CASE AND EPOXY FILL.
LEAD MATERIAL: AXIAL SOLDER COATED OR TINNED SOLID WIRE, AWG AS SPECIFIED IN TABLES.
DIMENSIONS: AS SPECIFIED IN TABLES.
ELECTRICAL CHARACTERISTICS
CAPACITANCE: AS SPECIFIED IN TABLES ± REQUESTED TOLERANCE WHEN MEASURED AT OR
REFERRED TO 1000 ± 20 HZ AND 25 ± 5 °C.
TOLERANCE: ±5%, ±10%, AND ±20% AVAILABLE. OTHER TOLERANCES AVAILABLE UPON REQUEST.
DISSIPATION FACTOR: SHALL NOT BE GREATER THAN 1.0% WHEN MEASURED AT OR REFERRED TO
1000 ± 20 HZ AND 25 ± 5 °C.
INSULATION RESISTANCE: SHALL BE GREATER THAN 10,000 MΩ X µ WHEN MEASURED AFTER 2
MINUTES ELECTRIFICATION AT 200VDC AND 25 ± 5 °C.
DIELECTRIC STRENGTH: 400VDC (FOR 220VAC RATING) AND 500VDC (FOR 250VAC RATING) FOR 1
MINUTE THROUGH A LIMITING RESISTANCE OF 100 OHMS/VOLT AT 25 ± 5 °C.
RATED VOLTAGE: 220VAC AND 250VAC AVAILABLE. ALL RATINGS ARE FOR 50/60 HZ OPERATION.
TEMPERATURE: -55 °C TO +85 °C AT FULL RATED VOLTAGE OPERATIONAL TEMPERATURE, +105 °C
MAX STORAGE TEMPERATURE.
ADDITIONAL INFORMATION
ORDERING INFORMATION: ALL ASC CAPACITORS ARE ORDERED BY "FAMILY CAP-TOL-VOLT"
DESIGNATION. (I.E. TO ORDER AN X637 1.0µF, ±10%, 250VAC CAPACITOR, REQUEST PART NUMBER
"X637 1-10-250")
SEE ALSO: "GENERAL INFORMATION - POLYESTER CAPACITORS" DOCUMENT FOR ADDITIONAL
PHYSICAL, ELECTRICAL, AND PERFORMANCE CHARACTERISTICS NOT MENTIONED IN THIS FILE.
WARNING: INFORMATION ON THIS FILE IS SUBJECT TO CHANGE WITHOUT NOTICE AT ASC'S
DISCRETION.
LAST MODIFIED: 09/26/01
METALLIZED POLYESTER
TAPE WRAP AND EPOXY FILL CASE