PD - 95039 IRF7313PbF l l l l l l HEXFET(R) Power MOSFET Generation V Technology Ultra Low On-Resistance Dual N-Channel MOSFET Surface Mount Fully Avalanche Rated Lead-Free S1 1 8 D1 G1 2 7 D1 S2 3 6 D2 G2 4 5 D2 VDSS = 30V RDS(on) = 0.029 Top View Description Fifth Generation HEXFETs from International Rectifier utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the designer with an extremely efficient and reliable device for use in a wide variety of applications. The SO-8 has been modified through a customized leadframe for enhanced thermal characteristics and multiple-die capability making it ideal in a variety of power applications. With these improvements, multiple devices can be used in an application with dramatically reduced board space. The package is designed for vapor phase, infra red, or wave soldering techniques. SO-8 Absolute Maximum Ratings ( TA = 25C Unless Otherwise Noted) Drain-Source Voltage Gate-Source Voltage TA = 25C TA = 70C Continuous Drain Current Pulsed Drain Current Continuous Source Current (Diode Conduction) TA = 25C Maximum Power Dissipation TA = 70C Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Junction and Storage Temperature Range Symbol Maximum VDS V GS 30 20 6.5 5.2 30 2.5 2.0 1.3 82 4.0 0.20 5.8 -55 to + 150 ID IDM IS PD EAS IAR EAR dv/dt TJ, TSTG Units V A W mJ A mJ V/ ns C Thermal Resistance Ratings Parameter Maximum Junction-to-Ambient Symbol Limit Units RJA 62.5 C/W 10/7/04 IRF7313PbF Electrical Characteristics @ TJ = 25C (unless otherwise specified) V(BR)DSS/TJ Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient RDS(on) Static Drain-to-Source On-Resistance VGS(th) gfs Gate Threshold Voltage Forward Transconductance IDSS Drain-to-Source Leakage Current V(BR)DSS I GSS Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Min. 30 1.0 Typ. Max. Units Conditions V V GS = 0V, ID = 250A 0.022 V/C Reference to 25C, ID = 1mA 0.023 0.029 V GS = 10V, ID = 5.8A 0.032 0.046 V GS = 4.5V, ID = 4.7A V V DS = V GS, ID = 250A 14 S V DS = 15V, ID = 5.8A 1.0 V DS = 24V, VGS = 0V A 25 V DS = 24V, VGS = 0V, TJ = 55C 100 V GS = 20V nA -100 V GS = -20V 22 33 I D = 5.8A 2.6 3.9 nC V DS = 15V 6.4 9.6 V GS = 10V, See Fig. 10 8.1 12 V DD = 15V 8.9 13 I D = 1.0A ns 26 39 R G = 6.0 17 26 R D = 15 650 V GS = 0V 320 pF V DS = 25V 130 = 1.0MHz, See Fig. 9 Source-Drain Ratings and Characteristics IS I SM VSD trr Qrr Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse RecoveryCharge Min. Typ. Max. Units 2.5 30 0.78 45 58 1.0 68 87 A V ns nC Conditions MOSFET symbol showing the G integral reverse p-n junction diode. TJ = 25C, IS = 1.7A, VGS = 0V TJ = 25C, IF = 1.7A di/dt = 100A/s Notes: Repetitive rating; pulse width limited by max. junction temperature. ( See fig. 11 ) Starting TJ = 25C, L = 10mH RG = 25, IAS = 4.0A. ISD 4.0A, di/dt 74A/s, VDD V(BR)DSS, TJ 150C Pulse width 300s; duty cycle 2%. Surface mounted on FR-4 board, t 10sec. D S IRF7313PbF 100 100 VGS 15V 10V 7.0V 5.5V 4.5V 4.0V 3.5V BOTTOM 3.0V VGS 15V 10V 7.0V 5.5V 4.5V 4.0V 3.5V BOTTOM 3.0V TOP I D, Drain-to-Source Current (A) I D , Drain-to-Source Current (A) TOP 10 3.0V 20s PULSE WIDTH TJ = 25C A 1 0.1 1 10 3.0V 20s PULSE WIDTH TJ = 150C A 1 0.1 10 1 10 VDS, Drain-to-Source Voltage (V) V DS , Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics VDS 100 ISD , Reverse Drain Current (A) I D , Drain-to-Source Current (A) 100 TJ = 25C TJ = 150C 10 VDS = 10V 20s PULSE WIDTH 1 3.0 3.5 4.0 4.5 VGS , Gate-to-Source Voltage (V) Fig 3. Typical Transfer Characteristics A 5.0 TJ = 150C 10 TJ = 25C VGS = 0V 1 0.4 0.6 0.8 1.0 1.2 1.4 V SD , Source-to-Drain Voltage (V) Fig 4. Typical Source-Drain Diode Forward Voltage A 1.6 RDS(on) , Drain-to-Source On Resistance (Normalized) 2.0 RDS (on) , Drain-to-Source On Resistance () IRF7313PbF ID = 5.8A 1.5 1.0 0.5 0.0 -60 -40 -20 VGS = 10V 0 20 40 60 0.040 0.032 0.028 0.024 0 0.08 0.06 I D = 5.8A 0.04 0.02 0.00 12 V GS , Gate-to-Source Voltage (V) Fig 7. Typical On-Resistance Vs. Gate Voltage 15 A E AS , Single Pulse Avalanche Energy (mJ) RDS (on) , Drain-to-Source On Resistance () 0.10 9 20 30 40 A Fig 6. Typical On-Resistance Vs. Drain Current 0.12 6 10 I D , Drain Current (A) Fig 5. Normalized On-Resistance Vs. Temperature 3 V GS = 10V 0.020 80 100 120 140 160 TJ , Junction Temperature ( C) 0 V GS = 4.5V 0.036 200 TOP BOTTOM 160 IIDD 1.8A 3.2A 4.0A 120 80 40 0 25 50 75 100 125 Starting T J , Junction Temperature (C) Fig 8. Maximum Avalanche Energy Vs. Drain Current A 150 IRF7313PbF 20 V GS = 0V, f = 1MHz C iss = Cgs + C gd , Cds SHORTED C rss = C gd C oss = C ds + C gd 900 VGS , Gate-to-Source Voltage (V) C, Capacitance (pF) 1200 Ciss Coss 600 Crss 300 0 1 10 100 A ID = 5.8A VDS = 15V 16 12 8 4 0 0 10 20 30 40 QG , Total Gate Charge (nC) VDS , Drain-to-Source Voltage (V) Fig 9. Typical Capacitance Vs. Drain-to-Source Voltage Fig 10. Typical Gate Charge Vs. Gate-to-Source Voltage Thermal Response (Z thJA ) 100 0.50 0.20 10 0.10 0.05 0.02 1 PDM 0.01 t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJA + TA SINGLE PULSE (THERMAL RESPONSE) 0.1 0.00001 0.0001 0.001 0.01 0.1 1 10 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient 100 IRF7313PbF SO-8 Package Outline Dimensions are shown in milimeters (inches) D DIM B 5 A A INCHES MAX MIN .0532 .0688 1.35 A1 .0040 6 8 7 6 5 1 2 3 4 H E 0.25 [.010] A e e1 8X b 0.10 0.25 .013 .020 0.33 0.51 c .0075 .0098 0.19 0.25 D .189 .1968 4.80 5.00 E .1497 .1574 3.80 4.00 e .050 BASIC 1.27 BASIC .025 BASIC 0.635 BAS IC H .2284 .2440 5.80 6.20 K .0099 .0196 0.25 0.50 L .016 .050 0.40 1.27 y 0 8 0 8 K x 45 A C 0.25 [.010] .0098 MAX 1.75 b e1 6X MILLIMET ERS MIN y 0.10 [.004] A1 8X L 8X c 7 C A B FOOT PRINT NOT ES : 1. DIMENS IONING & T OLERANCING PER AS ME Y14.5M-1994. 8X 0.72 [.028] 2. CONT ROLLING DIMENS ION: MILLIMET ER 3. DIMENS IONS ARE S HOWN IN MILLIMET ERS [INCHES ]. 4. OUT LINE CONFORMS T O JEDEC OUT LINE MS -012AA. 5 DIMENS ION DOES NOT INCLUDE MOLD PROT RUS IONS. MOLD PROT RUS IONS NOT T O EXCEED 0.15 [.006]. 6 DIMENS ION DOES NOT INCLUDE MOLD PROT RUS IONS. MOLD PROT RUS IONS NOT T O EXCEED 0.25 [.010]. 6.46 [.255] 7 DIMENS ION IS T HE LENGT H OF LEAD FOR S OLDERING T O A SUBS T RAT E. 3X 1.27 [.050] 8X 1.78 [.070] SO-8 Part Marking Information (Lead-Free) EXAMPLE: T HIS IS AN IRF7101 (MOSFET ) INT ERNAT IONAL RECT IFIER LOGO XXXX F 7101 DAT E CODE (YWW) P = DES IGNAT ES LEAD-FREE PRODUCT (OPTIONAL) Y = LAST DIGIT OF T HE YEAR WW = WEEK A = AS SEMBLY S IT E CODE LOT CODE PART NUMBER IRF7313PbF SO-8 Tape and Reel Dimensions are shown in milimeters (inches) TERMINAL NUMBER 1 12.3 ( .484 ) 11.7 ( .461 ) 8.1 ( .318 ) 7.9 ( .312 ) FEED DIRECTION NOTES: 1. CONTROLLING DIMENSION : MILLIMETER. 2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES). 3. OUTLINE CONFORMS TO EIA-481 & EIA-541. 330.00 (12.992) MAX. 14.40 ( .566 ) 12.40 ( .488 ) NOTES : 1. CONTROLLING DIMENSION : MILLIMETER. 2. OUTLINE CONFORMS TO EIA-481 & EIA-541. Data and specifications subject to change without notice. This product has been designed and qualified for the Consumer market. Qualifications Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.10/04